• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.747-754
• /
• 1989

The effects of CuO and SiO2 on the sintered density, grain growth and magnetic properties of Sr-ferrite were investigated. The sintered density of Sr-ferrite is increased with increasing the amount of CuO or SiO2 addition. The grain of Sr-ferrite grow uniformly with the addition of CuO, so remanence increases and coercivity decreases. The addition of SiO2 increase coercivity but does not affect remanence prominently. The sintering temperature above 125$0^{\circ}C$ and SiO2 addition above 0.8wt% causes abnormal grain growth in Sr-ferrite. When CuO and SiO2 are added simultaneouly, remanence does not decrease but coercivity shows low value.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.471-477
• /
• 1991

Effects of ZnO, PbO and SiO2 on the grain growth and magnetic properties of Sr-ferrite were investigated. (1) Addition of ZnO to Sr-ferrite increased remanence, but decreased coercivity and maximum energy product. (2) Addition of PbO up to 0.5 wt% increased (B$.$H)max of Sr-ferrite, but addition more than 0.5 wt% decreased (B$.$H)mzx (3) SiO2 addition to the 0.5 wt% PbO doped Sr-ferrite decreased remanence and increased coercivity. The coercivity increase in due to the grain refinement effect of SiO2. But addition of SiO2 more than 0.5 wt% invoked a decrease of coercivity and (B$.$H)max of Sr-ferrite due to abnormal grain growth. Sr-ferrite magnet having maximum energy product of 3.7MGOe was fabricated by using the roasting product of Pyrrhotite.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 학술대회 초록집
• /
• pp.107-109
• /
• 2009

미세자기학은 분자구조 단위에서 (Micromagnetic modeling) 자성 광물의자화 획득 및 자화 소멸을 연구하는 학문으로 행성지질학적으로 흥미있는 자성 광물의 자화 상태를 수치해석으로 풀어내는 학문이다. 자기이력곡선 분석은 시료를 파괴하거나 가열하지 않고 빠르고 정확하게 자성 광물의 종류 및 크기를 식별할수 있다. 정6면체 형태의 합성자철석이 아닌 자연산에 존재하는 8면체 형태의 모델을 택해야 기존의 실험 결과를 더 잘 설명함을 알아내었다. 특히 8면체의 경우 120 nm 이상의 크기에서 magnetic coercivity와 magnetic remanence가 더욱 안정적이고 커짐을 알아냈다.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.245-249
• /
• 2013

A finite element model was built for MnBi/${\alpha}$-Fe nanocomposite permanent magnets, and the demagnetization curves of the magnets were simulated by micro-magnetic calculation. The microstructure of the cubic model is composed of 64 irregular grains with an average grain size of 20 nm. With the volume fraction of soft magnetic phase (t vol. %) ranged from 5 to 20 vol. %, both isotropic and anisotropic nanocomposite magnets show typical single-phase permanent magnets behavior in their demagnetization curves, illustrating good intergranular exchange coupling effect between soft and hard magnetic phases. With the increase of volume fraction of soft magnetic phase in both isotropic and anisotropic magnets, the coercive force of the magnets decreases monotonically, while the remanence rises at first to a peak value, then decreases. The optimal values of maximum energy products of isotropic and anisotropic magnets are 84 and $200kJ/m^3$, respectively. Our simulation shows that the MnBi/${\alpha}$-Fe nanocomposite permanent magnets own excellent magnetic properties and therefore good potential for practical applications.

• 한국자기학회지
• /
• 제11권6호
• /
• pp.262-266
• /
• 2001

본 연구에서는 dc 마그네트론 스터링법으로 CoSm 박막을 제작하여 자기적 성질의 자성층 두께 의존성을 조사하였다. 고밀도 자기기록 매체의 여러 가지 성질 중 자기역전부피는 자기기록 매체에 저장된 정보의 열적 안정성, 자화반전기구 및 잡음을 이해하는 데 매우 중요한 자료가 된다. 따라서 자기화 감쇄의 시간 의존성과 직류 demagnetization remanence 곡선 측정결과로부터 각각 점성계수와 비가역 자화율을 구한 다음 최대 점성계수 및 비가역 자화율을 이용하여 최대 자기역전부피의 두께 의존성을 조사하였다. 자기역전부피와 보자력은 CoSm의 두께가 48 nm와 24 nm에서 각각 최대를 보이다가 오히려 감소하였으나 자기이방성은 계속 증가하는 경향을 보였다. 이와 같은 현상은 자성층의 두께가 증가함에 따라 결정립 또는 nanocrystallites 사이의 자기적 교환 상호작용이 증가하기 때문인 것으로 해석된다.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.381-393
• /
• 2002

Recent developments in nanocrystalline and nanocomposite rare earth-transition metal magnets are reviewed and emphasis is placed on research work at IFW Dresden. Principal synthesis methods include high energy ball milling, melt spinning, mold casting and hydrogen assisted methods such as reactive milling and hydrogenation-disproportionation-desorption-recombination. These techniques are applied to NdFeB-, PrFeB- and SmCo-type systems with the aim to produce high remanence magnets with high coercivity. Concepts of maximizing the energy density in nanostructured magnets by either inducing a texture via anisotropic HDDR or hot deformation or enhancing the remanence via magnetic exchange coupling are evaluated. With respect to high temperature applications melt spun $Sm(Co_{0.74}Fe_{0.1}Cu_{0.12}Zr_{0.04})_{7.5}$ ribbons were prepared, which showed coercivities of up to 0.53 T at 50$0^{\circ}C$. Partially amorphous $Nd_{60}Fe_xCo_{30-x}Al_{10}(0{\leq}x{\leq}30)$ alloys were prepared by copper mold casting. The effect of transition metal content on the glass-forming ability and the magnetic properties was investigated. The $Nd_{60}Co_{30}Al_{10}$ alloy exhibits an amorphous structure shown by the corresponding diffraction pattern. A small substitution of Co by 2.5 at.% Fe results In the formation of Fe-rich crystallites embedded in the Nd-rich amorphous matrix. The Fe-rich crystallites show hard magnetic behaviour at room temperature with a coercivity value of about 0.4 T, relatively low saturation magnetization and a Curie temperature of 500 K.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.427-431
• /
• 1995

The influence of Nd and B contents on the magnetic properties and structures of ${\alpha}-Fe$ based Nd-(Fe,Co)-B-Mo-Cu alloys was investigated. $Nd_{4}{(Fe_{0.9}Co_{0.1})}_{92-x}B_{x}Mo_{3}Cu_{1}$ and $Nd_{x}{(Fe_{0.9}Co_{0.1})}_{86-x}B_{10}Mo_{3}Cu_{1}$ amorphous alloys prepared by rapid solidification process were crystallized to form nanocrystalline structure. The increase of B content in $Nd_{4}{(Fe_{0.9}Co_{0.1})}_{92-x}B_{x}Mo_{3}Cu_{1}$ nanocrystalline resulted in the change of stucture of soft phase in the sequence of ${\alpha}-Fe$->${\alpha}-Fe+Fe_{3}B$->$Fe_{3}B$. The coercivitis of the alloys were increased with increasing B content and was 263 kA/m at x=18. On the contrary, the remanence has shown an opposite trends. The increase of Nd content in $Nd_{x}{(Fe_{0.9}Co_{0.1})}_{86-x}B_{10}Mo_{3}Cu_{1}$ nanocrystalline containing ${\alpha}-Fe$ as main phase had no effect on the structure and improved coercivity up to 256 kA/m. However, the remanence was decreased from 1.4 T to 1.15 T according to the increase of Nd content.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권9호
• /
• pp.3068-3086
• /
• 2022

Digital Forensics is gaining popularity in adjudication of criminal cases as use of electronic gadgets in committing crime has risen. Traditional approach to collecting digital evidence falls short when the disk is encrypted. Encryption keys are often stored in RAM when computer is running. An approach to acquire forensic data from RAM when the computer is shut down is proposed. The approach requires that the investigator immediately cools the RAM and transplant it into a host computer provisioned with a tool developed based on cold boot concept to acquire the RAM image. Observation of data obtained from the acquired image compared to the data loaded into memory shows the RAM chips exhibit some level of remanence which allows their content to persist after shutdown which is contrary to accepted knowledge that RAM loses its content immediately there is power cut. Results from experimental setups conducted with three different RAM chips labeled System A, B and C showed at a reduced temperature of -25C, the content suffered decay of 2.125% in 240 seconds, 0.975% in 120 seconds and 1.225% in 300 seconds respectively. Whereas at operating temperature of 25℃, there was decay of 82.33% in 60 seconds, 80.31% in 60 seconds and 95.27% in 120 seconds respectively. The content of RAM suffered significant decay within two minutes without power supply at operating temperature while at a reduced temperature less than 5% decay was observed. The findings show data can be recovered for forensic evidence even if the culprit shuts down the computer.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.453-460
• /
• 1997

Sr-ferrite having magnetoplumbite structure is similar to Ba-ferrite in magnetic characteristics, but better magnetic characteristics for using motor application. To improve remanence magnetic flux density(Br) and coercive force(iHc), it is necessary that sintered ferrites must have high density and grain size less than 1 $\mu$m. By varying n values in SrO.nFe2O3 basic composition, calcination temperature, and BaO addition, Sr-ferrite powder and sintered specimen was prepared. The n values, calcination temperature, and BaO addition affected secondary phase formation, particle size, and particle shape. BaO addition enhanced Fe2O3 secondary phase and hexagonal shape particle. Fe2O3 phase reduced sintered density which greatly decreased Br.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.824-827
• /
• 2003

Recently, Development of Rare Earth Permanent magnet with the high remanence, high coercivity allow the design of brushless motors with very high efficiency over a wide speed range. Cogging torque is produced in a permanent magnet by magnetic attraction between the rotor mounted permanent magnet and the stator teeth. It is an undesired effect that contributes to the machines output ripple, vibration, and noise. This cogging torque can be reduced by variation of magnet arc length, airgap length, magnet thickness, shifting the magnetic pole and varying the radial shoe depth and etc. In this paper, Some airgap length and magnet arc that reduce cogging torque are found by FEM(Finite element method). The SPM type of high-capacity BLDC motor is optimized as a sample model.