• Journal of Welding and Joining
• /
• v.27 no.1
• /
• pp.71-78
• /
• 2009

In the circumferential welding of pipe, welding phenomenon changes with the position of pipe. Especially in the overhead position, back bead of vertical-up position would be sunk. To investigate the size of back bead and keyhole with the change of the flow rate of pilot and shield gas at each position, bead-on plate welds were conducted on 6mm thickness SS400 with inclined-up position. When the rest of welding conditions remained constant, the width of back bead was increased as the flow rate of pilot gas was increased. And back bead tended to convex as the flow rate of shield gas was increased.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.3
• /
• pp.319-331
• /
• 1997

The purpose of this study was to evaluate the bone-forming capacity of the periosteum in calvaria of rats. The experiment was carried out in 49 rats. We exposed the calvaria and made 1㎝ diameter round full thickness defect at both sides of calvaria. In the left calvarial bone serving as control, the periosteum was removed after implantation of block, while in the right calvarial bone the periosteum remained intact as an experimental site. The histologic examination of bone response was performed after 1-, 2-, 4-, 6-,8-, 12-, 24-week implantation in calvaria of rats. We could observe the periosteal preservation favorably influenced the bone formation.

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.3
• /
• pp.190-192
• /
• 2012

In the extremity surgery, pneumatic tourniquet and povidone-iodine solution are commonly used to provide an aseptic, bloodless field, and their complication rate has remained low. However, chemical burn under tourniquet has been rarely reported. Patients sustained burn injuries over the dependent, weight-bearing regions such as posterior neck, back, buttocks and posterior thighs. This rare adverse complication occurred in a 22-year-old man who underwent modified Brostrom operation with arthroscopic os trigonum excision. 10% povidone-iodine was used as topical antiseptic, and full thickness burn occurred underneath the area of tourniquet application. Main causes of povidone-iodine related chemical burn are considered maceration, irritation of the skin, long term use of the tourniquet and pressure. To reduce the complications like chemical burn, awareness of the risk and the possible pathogenesis as well as the preventive measures is important in surgical practice.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.330-331
• /
• 2006

Fabrication of a nano-laminar ceramic composite by sintering thin ceramic plates was examined. Silver-coated glass flakes with a thickness of less than $1{\mu}m$ were consolidated by pulsed current sintering or hotpressing to obtain model composites. The samples sintered at the optimum conditions were fairly dense, and the flakes were aligned by uniaxial press. The metal coating remained on the flakes through the sintering process, and became an interface layer between the flakes. No crack propagation through the transverse direction of the lamellar was observed in the indentation test. The possibilities of high resistance against crack propagation was suggested.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.3
• /
• pp.205-210
• /
• 1999

Silk nonwoven fabrics are prepared by needle punching and thermal bonding with silk waste. To enhance the carding efficiency, the degumming rate was controlled with sodium hydrogen sulfite solution. The amount of the remained sericin was 3%(S-3), and 6%(S-6). Mixing wool and LMP(Low melting polyester) with the silk, to improve carding efficiency, was also effective. Following items were tested with prepared silk nonwovon fabrics : weight, thickness, compression, tensile strength, heat insulation, water absorption, and deodorization. The results show that the silk nonwoven fabrics could be used for apparels and new biomaterials.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.127-134
• /
• 2001

Nano adhesion and friction between a Sj$_3$N$_4$ AFM tip and thin silver films were experimentally studied. Tests were performed to measure the nano adhesion and friction in both AFM(atomic force microscope) and LFM(lateral force microscope) modes in various ranges of normal load. Thin silver films deposited by IBAD (ion beam assisted deposition) on Si-wafer (100) and Si-wafer of different surface roughness were used. Results showed that nano adhesion and friction decreased as the surface roughness increased. When the Si surfaces were coated by pure silver, the adhesion and friction decreased. But the adhesion and friction were not affected by the thickness of IBAD silver coating. As the normal force increased, the adhesion forces of bare Si-wafer and IBAD silver coating film remained constant, but the friction forces increased linearly. Test results suggested that the friction was mainly governed by the adhesion as long as the normal load was low.

• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.57-64
• /
• 2013

Purpose: Waste parts of zirconia blocks and powders were remained after CAD/CAM process. In order to make these residual zirconia fit for practical use, zirconia single cores were produced by drain casting process. Methods: Remained zirconia blocks were reduced to powders with zirconia mortar, and screened with 180 mesh sieve. Zirconia slip was prepared from waste parts of zirconia by ball milling. Plaster molds for forming cores by slip casting were also prepared. Formed cores were removed from mold after partial drying. Dried cores were biscuit fired at $1,100^{\circ}C$ for 1hour. Biscuit fired cores were treated with tools to control the fitness and thickness. Finished cores were $2^{nd}$ fired at $1,500^{\circ}C$ for 1hour. Microstructure of cross section of core was observed by SEM. Results: When mill pot was filled with 100g of zirconia and alumina mixed powder, 300g of zirconia ball, and 180g of distilled water, the optimum slip for drain casting was obtained. Gypsum plaster for ceramic forming was more suitable then yellow stone plaster for casting process. SEM photograph showed the microstructure of fully dense with uniform grain size of zirconia and well dispersed alumina grains into the zirconia matrix. Conclusion: Zirconia single cores were produced by drain casting process. Drain casting is useful process to make these residual zirconia fit for practical use. Further study will be focused on the preparation of the bridge type cores by casting.

• Nutritional Sciences
• /
• v.1 no.1
• /
• pp.34-41
• /
• 1998

This study examined the proper roles of dietitian and nurse-teacher in the weight control program (WCP) in schools and the effect of the WCP on subjects with respect to anthropometric measurements, nutrition knowledge, dietary attiude, and behavior changes. The program consisted of six sessions of nutrition education and frequent face-to-face nutrition counseling. Subjects were 22 obese children in the 4th and 5th grade who underwent counseling and 18 obese children in another school who served as a control group. After two months of WCP, obesity index such as .elative body weight (RBW, from 135.7 to 132.5), tricep skinfold thickness (TSFT, from 34.9 to 32.8 mm), and body fat content (from 32.0 to 29.8%) had decreased significantly in the experimental group, while the control group showed no significant differences in these indices. The reductions in obesity indices were maintained in the experimental group except for fat content (32.6%), which returned to its original value within six months. The control group significantly increased fat content in the same period (from 31.2% to 36.2%). Both groups decreased RBW, TSFT, and fat content while midarm circumference and waist/hip ratio remained the same after one year. Subjects' nutrition knowledge was improved with average test scores from 15.1 to 16.7 while nutrition attitude and behavior test scores remained unchanged suggesting that behavior modification may require more time than knowledge acquirement. These results suggest that proper nutrition counseling can initiate weight reduction. However, the maintenance of controlled weight requires changes in attitude and behavior which have not been achieved by the present WCP. The role of school dietitian for WCP in this study was limited to assisting the nurse-teacher in nutrition education. Expansion of dietitian's role in nutrition education and counseling is needed.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.43-52
• /
• 2017

Purpose: Physical and chemical properties of gold is most suitable to be restored of teeth to its original state. Recently zirconia was used instead of gold because of esthetical and intimacy of human body. Because of high strength and high abrasion resistance of zirconia, all zirconia artificial tooth lead to wear the original tooth of opposite site. To preserve this original tooth, zirconia artificial tooth covered with dental ceramic glass was used. When joining the zirconia core and dental ceramic glass, difference of their thermal expansion coefficient and wetting ability is generated the residual stress at interface lead to crack. In order to solve this problem, intermediate layer what is called zir-liner was imported to decrease the residual stress and increase the bonding strength. Methods: In this study, to identify the optimum conditions for manufacturing process, various methods to rough the surface of zirconia core were adopted, and vary the thickness of interlayer, and analyzed bond strength. Results: Bond strength of sanding specimens group showed higher than that of non-sanding specimens group, and once applied intermediate layer with sanding specimens showed highest bond strength with 28 MPa. SEM photomicrographs of zirconia cores fired at $1500^{\circ}C$ showed parallel straight lines in sanding and pockmarked surface in blasting surfaces as abrasion traces. Observation of the destruction section after shear test by SEM were carried out. Liner applied non-sanding group and non-liner applied sanding group all showed interfacial crack. Sandblasting group with non-liner showed remained dental ceramic glass on the surface of zirconia. Sandblasting group with once applied liner showed partially remained liner and dental ceramic glass on the surface of zirconia. XRD analysis revealed that sandblasting group showed higher monoclinic peaks than other specimens group and this result was due to the high collision energy for stress induced phase transformation. Conclusions: A study on the improvement of bonding strength between zirconia and dental ceramic glass steadily carried out for the future to practical use.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.3
• /
• pp.323-330
• /
• 1996

Objective : Cavitary lesion in pulmonary tuberculosis sometimes makes problems in the course of treatment. Especially, retreatment cases tend to respond poorly to current antituberculosis agents. So, authors tried to render a guideline for clinical approach toward cavitary lesions in pulmonary tuberculosis. Methods : Retrospective analysis of 33 pulmonary tuberculosis patients with cavitary lesions was made. All the patients had got treatment at National Masan Tuberculosis Hospital from Jan. 1995 to Aug. 1995. Results: The ratio between male and female was 10:1. Age distribution was 69.7% in 3rd and 4th decades. The locations of cavitary lesion were 60.6% in right upper lung field and 36.4% in left upper lung field. In the extent of disease, there were 12 cases(36.4%) in moderate advanced and 21 cases in far advanced. Cavitary lesions were closed in 5 eases and remained in 28 eases. In the cases of closed cavity, it was happened within $10.6{\pm}4.72$ months after they took treatment, the size of cavity was $35.5{\pm}17.1$ in long diameter, $27.0{\pm}12.2$ in short diameter and $4.6{\pm}2.1\;mm$ in wall thickness. In the cases of remained cavity, the size of cavity was $31.9{\pm}12.3$ in long diameter, $21.0{\pm}9.8$ in short diameter and $5.04{\pm}2.0\;mm$ in wall thickness. In terms of negative conversion, it took $3.8{\pm}2.17$ months in the case of closed cavity but it was happened within 5 months for only 4 patients in the case of remained cavity. In the point of past medication history, there was none in closed cavities but there were none in 1 case, once in 3 cases, two times in 9 cases and more than three times in 13 cases among remained cavitary lesions. Conclusion : In the retreatment cases of pulmonary tuberculosis with cavitary lesions, they tend to respond poorly to current antituberculosis agents. So, if the lesions are localized, operative intervention may be a proper method as adjunctive treatment.