Browse > Article
http://dx.doi.org/10.14347/kadt.2017.39.1.43

Shear bond strength of a layered zirconia and porcelain according to treatment of zirconia liner  

Seo, Jeong Il (Dept. of Dental Laboratory Technology, Jinju Health Sciences College)
Park, Won Uk (Dept. of Dental Laboratory Technology, Jinju Health Sciences College)
Kim, Yang Geun (Dept. of Dental Laboratory Technology, Jinju Health Sciences College)
Publication Information
Journal of Technologic Dentistry / v.39, no.1, 2017 , pp. 43-52 More about this Journal
Abstract
Purpose: Physical and chemical properties of gold is most suitable to be restored of teeth to its original state. Recently zirconia was used instead of gold because of esthetical and intimacy of human body. Because of high strength and high abrasion resistance of zirconia, all zirconia artificial tooth lead to wear the original tooth of opposite site. To preserve this original tooth, zirconia artificial tooth covered with dental ceramic glass was used. When joining the zirconia core and dental ceramic glass, difference of their thermal expansion coefficient and wetting ability is generated the residual stress at interface lead to crack. In order to solve this problem, intermediate layer what is called zir-liner was imported to decrease the residual stress and increase the bonding strength. Methods: In this study, to identify the optimum conditions for manufacturing process, various methods to rough the surface of zirconia core were adopted, and vary the thickness of interlayer, and analyzed bond strength. Results: Bond strength of sanding specimens group showed higher than that of non-sanding specimens group, and once applied intermediate layer with sanding specimens showed highest bond strength with 28 MPa. SEM photomicrographs of zirconia cores fired at $1500^{\circ}C$ showed parallel straight lines in sanding and pockmarked surface in blasting surfaces as abrasion traces. Observation of the destruction section after shear test by SEM were carried out. Liner applied non-sanding group and non-liner applied sanding group all showed interfacial crack. Sandblasting group with non-liner showed remained dental ceramic glass on the surface of zirconia. Sandblasting group with once applied liner showed partially remained liner and dental ceramic glass on the surface of zirconia. XRD analysis revealed that sandblasting group showed higher monoclinic peaks than other specimens group and this result was due to the high collision energy for stress induced phase transformation. Conclusions: A study on the improvement of bonding strength between zirconia and dental ceramic glass steadily carried out for the future to practical use.
Keywords
zirconia; liner; sand-blasting;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Cehreli MC, Kokat AM, Akca K. CAD/CAM Zirconia vs. slip-cast glass-infiltrated Alumina/Zirconia all-ceramic crowns: 2-year results of a randomized controlled clinical trial. Journal of applied oral science, 17, 49-55, 2009.   DOI
2 Lee HC . The interface study of surface treated zirconia and dental porcelain. Graduate School of Paichai University Daejeon, 2011.
3 Jeon MH, Jeon YC, Jeong CM, Lim JS, Jeong HC. A study of precise fit of the CAD/CAM zirconia all-ceramic framework. J Kor Acad Prosthodont. 43, 611-621, 2005.
4 Kim OK, Cho IH, Lim JH. On the marginal fidelity of all ceramic core using CAD/CAM system thesis, Dankook Univ, 2001.
5 Komine F, Tomic M, Gerds T, Strub JR. Influence of different adhesive resin cements on the fracture strenth of aluminum oxide ceramic posterior crowns. J prosthet Dent, 92(4), 359-364, 2004.   DOI
6 Tada K , Sato T, Yoshinari M. Influence of surface treatment on bond strength of veneering ceramics fused to zirconia. Dental materials journal, 31, 287-96, 2012.   DOI
7 Thinschert J, Natt GW, Spiekermann H, Anusavice KJ. Marginal fit of alumina and zirconia based fixed partial dentures produced by a CAD/CAM system. Oper Dent 26, 367-374, 2001.
8 Woo CW. Bonding Strength of Zirconia with Glass Ceramic. Graduate School of Paichai University Daejeon, 2012.
9 Yamaguchi H, Ino S, Hamano N, Okada S, Teranaka T. Examination of bond strength and mechanical properties of Y-TZP zirconia ceramics with different surface modifications. Dental Materials journal, 31, 472-80, 2012.   DOI
10 Shin YH. The influence of Application of $ZirLiner^{(R)}$ and Surface Treatments on Shear Bond Strength of Zirconia-Porcelain Interface. Graduate School of Wonkwang University, 2007.