• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.357-362
• /
• 2011

Air springs are prevalently used as suspension in train. However, air springs are seldom used in automobiles where they improve stability and comfort by enhancing the impact-relief, breaking, and cornering performance. Thus, this study proposed a new method to analyze air springs and obtained some reliable design parameter which can be utilized in vehicle suspension system in contrast to conventional method. Among air spring types of suspension, this study focused on sleeve type of air spring as an analysis model since it has potential for ameliorating the quality of automobiles, specifically in its stability and comfort improvement by decreasing the shock through rubber sleeve. As a methodology, this study used MARC, as a nonlinear finite element analysis program, in order to find out maximum stress and maximum strain depending on reinforcement cord's angle variation in sleeves. The properties were found through uniaxial tension and pure shear test, and they were developed using Ogden Foam which is an input program of MARC. As a result, the internal maximum stresses and deformation according to the changes of cord angle are obtained. Also, the results showed that the Young's modulus becomes smaller, then maximum stresses decrease. It is believed that these studies can be contributed in automobile suspension system.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.7 no.1
• /
• pp.59-65
• /
• 2012

Objectives: This study is designed to report the valid result of complex of Chuna Therapy and Myofascial Release Technique(MRT) on scoliosis patients. Methods: The correction program for scoliosis takes 3 month per case. Chuna Therapy and MRT were given once a week and other oriental medicine care was given twice a week to care the complications of scoliosis. The Cobb's angle(by X-ray, Full spine view) and Visual analogue scale(VAS) were evaluated before and after the treatments. Results: After the program, both of Cobb's angle and VAS decreased. Conclusions: Though it is a case report, we found Chuna Therapy and MRT might have valid effect on scoliosis patients. Further rigorous case series and controlled trials are warranted.

• Wind and Structures
• /
• v.29 no.6
• /
• pp.471-488
• /
• 2019

Wind pressure is a critical argument for the wind-resistant design of structures. The attempt, however, to explore the wind pressure field on buildings still encounters challenges though a large body of researches utilizing wind tunnel tests and wind field simulations were carried out, due to the difficulty in logical treatments on the scale effect and the modeling error. The full-scale measurement has not yet received sufficient attention. By performing a field measurement, the present paper systematically addresses wind pressures on the rectangular attic of a double-tower building. The spatial and temporal correlations among wind speed and wind pressures at measured points are discussed. In order to better understand the wind pressure distribution on the attic facades and its relationship against the approaching flow, a full-scale CFD simulation on the similar rectangular attic is conducted as well. Comparative studies between wind pressure coefficients and those provided in wind-load codes are carried out. It is revealed that in the case of wind attack angle being zero, the wind pressure coefficient of the cross-wind facades exposes remarkable variations along both horizontal and vertical directions; while the wind pressure coefficient of the windward facade remains stable along horizontal direction but exposes remarkable variations along vertical direction. The pattern of wind pressure coefficients, however, is not properly described in the existing wind-load codes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2097-2107
• /
• 1996

The dynamic photoelastic technique had been utilized to investigate the possibillity of relieving the large local singular stresses induced at the corner of a right- angle- indenter. The indenter compressed a semi-infinite body dynamically with an impact load applied on the top of the indenter. The effects of the geometric changes of the indenter in terms of the diameter (d) and the location (1) of the stress relieving notch on the behavior of the dynamic contact stresses were investigated. The influence of stress relieving notches positioned along the edge of the semi-infinite body on the dynamic contact stresses were also studied by changing the diameter (D) and the location (L) of the notch. A multi-speak-high speed camera with twelve sparks were used to take photographs of full field dynamic isochromatic fringe patterns. The contact singular stresses were found to be released significantly by the stress relief notches both along the indenter and the edge of the semi-infinite body. The optimal position and geometry of the stress relieving notches were obtained with the aid of limited experimental results.

• Archives of Plastic Surgery
• /
• v.40 no.5
• /
• pp.559-563
• /
• 2013

Background One of the reasons women with macromastia chose to undergo a breast reduction is to relieve their complaints of back, neck, and shoulder pain. We hypothesized that changes in posture after surgery may be the reason for the pain relief and that patient posture may correlate with symptomatic macromastia and may serve as an objective measure for complaints. The purpose of our study was to evaluate the effect of reduction mammaplasty on the posture of women with macromastia. Methods A prospective controlled study at a university medical center. Forty-two patients that underwent breast reduction were studied before surgery and an average of 4.3 years following surgery. Thirty-seven healthy women served as controls. Standardized lateral photos were taken. The inclination angle of the back was measured. Regression analysis was performed for the inclination angle. Results Preoperatively, the mean inclination angle was 1.61 degrees ventrally; this diminished postoperatively to 0.72 degrees ventrally. This change was not significant (P-value=0.104). In the control group that angle was 0.28 degrees dorsally. Univariate regression analysis revealed that the inclination was dependent on body mass index (BMI) and having symptomatic macromastia; on multiple regression it was only dependent on BMI. Conclusions The inclination angle of the back in breast reduction candidates is significantly different from that of controls; however, this difference is small and probably does not account for the symptoms associated with macromastia. Back inclination should not be used as a surrogate "objective" measure for symptomatic macromastia.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.4
• /
• pp.141-150
• /
• 2022

PURPOSE: This study was conducted to investigate the effects of non-elastic and elastic tapes on pain, craniovertebral angle, and balance in forward head posture (FHP) patients. METHODS: A total of 44 adults with FHP were randomly assigned to a group that performed a stretching exercise after non-elastic taping (n = 22) and another group that performed the stretching exercise after elastic taping (n = 22), respectively. The stretching exercise was performed five times a week for 30 minutes per session. The visual analogue scale was used to compare neck pain, the craniovertebral angle was measured to compare alignment, and the limit of stability was measured to compare balance. RESULTS: The groups that performed the stretching exercise after both elastic and non-elastic taping showed significant positive changes in pain and the craniovertebral angle of the head in pre- post measurements (p < .05). In the follow-up test for the pain and craniovertebral angle, there was no significant difference from the post-test in the non-elastic group (p > .05), but a significant difference was seen in the elastic group (p < .05). CONCLUSION: Stretching exercises with taping for patients with a FHP are more effective in improving pain and alignment. However, the short-duration tape application did not affect the balancing ability. When the non-elastic tape was used, the effect lasted longer than that of the elastic tape, and pain relief was effective in the case of the elastic tape. Therefore, tape therapy would be more effective if customized according to the patient's condition.

• The Journal of Korean Physical Therapy
• /
• v.30 no.4
• /
• pp.108-111
• /
• 2018

Purpose: This study examined the effects of the forward head posture and tension type headache on neck movement among office workers. Methods: The subjects were 6 male and 21 female patients composed of a forward head posture group, forward head posture group with a tension type headache and a normal group. Each group consisted of 2 males and 7 females. The cranio-vertebral angle of the head and the angle of motion of the neck were measured. SPSS 23.0 was used for data analysis and one-way ANOVA was performed for the mean comparison of the neck movements in the three groups. Results: The participants had a limitation in the movement of all necks between the forward head posture group and forward head posture with tension type headache group compared to the normal subjects. The forward head posture with tension headache group had limited neck extension and lateral bending compared to the forward head posture group. Conclusion: Office workers have limitations in the movement of the neck when they are accompanied by forward head posture and tension headache. In particular, when accompanied with a tension headache, there is a restriction on the neck extension and side bending. This study is expected to provide basic data for the relief of tension headache and the treatment of forward head posture in office workers.

• The Journal of Korean Physical Therapy
• /
• v.30 no.5
• /
• pp.173-180
• /
• 2018

Purpose: This study examined the effects of sling exercise therapy on vertebral alignment, VAS, muscle activity, and multifidus of patients with chronic low back pain. Methods: Simple random sampling was used to divide the patients (n=116) into the sling exercise therapy group (SETG) and conservative physical therapy group (CPTG), with each group provided a intervention program in 3 sessions a week for 12 weeks. The lumbar lordosis angle (LLA), lumbar intervertebral disc angle (LIVDA) for vertebral alignment, lumbar muscle activity, and multifidus atrophy were measured before and after the intervention. Results: SETG showed significant changes in LLA, LIVDA of rate of change (delta score), and in relieving pain. The right-left balance gap for the lumbar dynamic muscle activity decreased after the intervention. The SETG showed significant changes in the grade of lumbar multifidus atrophy. Conclusion: The sling exercise therapy program is an effective exercise therapy method on vertebral alignment, muscle activity, recovery from multifidus atrophy, and pain relief for patients with chronic low back pain.

• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.79-88
• /
• 2002

This study was conducted to develop system for high speed rice transplanting machines. The control system includes a sensor detecting the tilt angle of the seedling bed, a micro-controller and a hydraulic system consisting of a double acting cylinder, a four-way three-position solenoid valve, a relief valve and a hydraulic pump. The levelling system shared the pump with the existing steering control, resulting in a tandem center circuit for the steering and levelling control systems. Using the input signal from the sensor, the micro-controller determined and generated the output signal to control the cylinder through the solenoid valve to keep the seedling bed always parallel to the water surface regardless of soil unevenness during the transplanting operations. Both an ON/OFF and a PWM control schemes were tested. When the flow rate was more than 1 ι/min in the ON/OFF control, the system showed unstable rolling. However, in the PWM control, the system worked stably although the flow rate was more than 1 ι/min. The PWM control showed a better performance when a large difference between the angle and the dead band of the control system occurred. The characteristics of tile system response to given tilt angles were predicted by a computer simulation. Both the ON/OFF and the PWM control systems worked well providing that the operating and waiting times were properly adjusted.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1095-1102
• /
• 2003

The most important thing in measuring the tool wear is to set up the measurement base. The end mill that is being used for machining of die is difficult to set up the base and to measure the tool wear because of geometric properties of that such as a helix and relief angle. In this study, a new instrument using spindle orientation function in end milling is developed to measure the tool wear and evaluated by the measuring system on the machine. Finally, this new method makes possible the wear measurement of same position and reduces the measuring time compared with the measuring methods such as the microscope and CCD.