• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2002년도 정기학술대회
• /
• pp.245-251
• /
• 2002

Electronic Speckle Pattern Interferometry(ESPI) is one of optical technique to measure displacement precisely, uses CCD camera to show result image in real time. General ESPI system measures in-plane or out-of-plane displacement. Shearography is one of electronic speckle pattern interferometric methods which allow full-field observation of surface displacement derivatives and it is robust in vibration. The shearography provides non-contacting technique of evaluating defects nondestructively In this study, the shearography was used to evaluate defects in Carbon Fiber Reinforced Plastic(CFRP). Various sizes of artificial defects were embedded in various depths of woven CFRP plate. Effects due to the variation of size and depth of defects were evaluated in this study.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권2호
• /
• pp.76-83
• /
• 2015

This study is implemented to find out the risk factors of adolescent suicide due to depression experiences and the factors that have effect on adolescent suicide attempt. Also it tries to figure out that if hospital treatment is enforced after a suicide attempt and the importance of prevention and therapy for adolescent suicide attempt. To analyze, used SPSS 22.0 and raw data made by online survey for adolescent health status is used. The factors effect on suicide attempt of adolescents who have had depression experience and who have not appear differently and hospital treatment is not being done well after attempting suicide. In conclusion, this study tries to show the factors that affect suicide attempts in adolescents, and to propose basis for the measures that can reduce suicide attempts in adolescents.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.749-757
• /
• 2007

Recently, with increasing interested in improvement of operational reliability and the systematic maintenance activities, the RCM analysis has been applied and tried to lots of applicable industries. This study covers applying the probability of failure cause to FMEA, and proposes an analytical method for this. Also, the measures of quantitative classification for the result of failure cause probability are addressed. Based on the field data, this thesis presents an identification for causes and characteristics of failure, and reviews them periodically from the above methodologies. As using FMEA applied the probability of failure cause, we in the future can look forward to improvement of efficiency for failure diagnosis & inspection, and reliability.

• 한국경영과학회지
• /
• 제22권1호
• /
• pp.141-157
• /
• 1997

The structure and dimensionality of the User Information Satisfaction (UIS) construct is an important theoretical issue that received considerable attentions. The acceptance of UIS as a standardized instrument requires confirmation that it explains and measures the user information satisfaction construct and its component. Based on a simple of 670 respondents who participated in dealing with the Public Management Information System (PMIS), this research used a confirmatory factor analysis to test the alternavtive models of underlying factor structure and assessed the reliability and validity of these factors and items in the PMIS. The result provided a support for a revised UIS model with four first-order factors and one PMIS The result provided a support for a revised UIS model with four first-order factors and one second-order (higher-order) factor in PMIS. To cross-validata these results, the author reexamined two prior data sets. The results showed that the revised model provides better model-data fit in all three data sets.

• International Journal of Reliability and Applications
• /
• 제11권2호
• /
• pp.123-138
• /
• 2010

This paper investigates a mathematical model of a system composed of two non-identical unit parallel system with common-cause failure, critical human error, non-critical human error, preventive maintenance and two type of repair, i.e. cheaper and costlier. This system goes for preventive maintenance at random epochs. We assume that the failure, repair and maintenance times are independent random variables. The failure rates, repair rates and preventive maintenance rate are constant for each unit. The system is analyzed by using the graphical evaluation and review technique (GERT) to obtain various related measures and we study the effect of the preventive maintenance preventive maintenance on the system performance. Certain important results have been derived as special cases. The plots for the mean time to system failure and the steady-state availability A(${\infty}$) of the system are drawn for different parametric values.

• International Journal of Reliability and Applications
• /
• 제8권1호
• /
• pp.67-82
• /
• 2007

This paper deals with the effectiveness analysis of an engineering system, which has two units of different strengths in parallel and one unit as a cold standby unit. Failure times for all the units have negative exponential distribution whereas their repair times have general distribution. Single server caters the need for the system. The effectiveness analysis of the system is done by using regenerative point technique. The different measures of effectiveness such as mean sojourn time, mean time to system failure, availability, busy period, etc, are derived. Cost factors also taken into consideration.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.222-231
• /
• 2003

After the reform of rail industry, a system to evaluate service qualities is required for the continuous improvement of railway service and the strength of competitiveness. This research provides evaluation categories and indices which are considered to be suited to the evaluation of rail service qualities. This study provides 4 categories and 11 indices to assess the rail service qualities: provision-operation interval/average operation speed, reliability-regularity/operation cancellation rate, safety- train usage term/facilities for the weak, client satisfaction- easiness of reserving and purchasing of tickets/comfort of queuing facilities/ kindness of train crews/ pleasantness of trains/provision of information, etc.

• 품질경영학회지
• /
• 제22권3호
• /
• pp.16-33
• /
• 1994

This paper developes a multiple-item scale instrument (called SHIPQUAL which is designed to measure the quality of shipping industry. The procedures of developing instrument were followed by recommendations on the developing measures of marketing constructs. We divided shipping service quality into 4 demensions (reliability, conformability, timely/completness, safety) by empirical study. These demensions and scales were varified through the assessment of reliability and validity. Finally, we suggested potential applications of the scale into the shipping industry.

• 대한원격탐사학회지
• /
• 제3권1호
• /
• pp.25-39
• /
• 1987

The purpose of this research is to develop the Automatic Fingerprint Verfication System by digital computer based on specially in PC level. Fingerprint is used as means of personal identity verification in view of that it has the high reliability and safety. Fingerprint pattern recognition algorithm is constitute of 3 stages, namely of the preprocessing, the feature extraction and the recognition. The preprocessing stage includes smoothing, binarization, thinning and restoration. The feature extraction stage includes the extraction of minutiae and its features. The recognition stage includes the registration and the matching score calculation which measures the similarity between two images. Tests for this study with 325 pairs of fingerprint resulted in 100% of separation which which in turn is turned out to be the reliability of this algorithm.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.362-369
• /
• 2017

Purpose: Recently, the government of China has established new safety regulations for towing devices. The new Chinese regulation has more unfavorable conditions than the conditions of other countries. So the various measures have been reviewed to satisfy this regulation. Methods: The regulation conditions were compared through analysis of strain energy, and a method for improving the accuracy of analysis is suggested. In addition, the test method considering the tolerance is presented through tolerance analysis. This paper also explained importance of confirming the quality of products through a case of poor quality of Chinese products such as poor heat treatment. Result: We could know how strong Chinese regulations are stronger than other national laws and investigated which member receives a lot of strain energy. In order to cope with these Chinese regulations, we suggested improvement of analysis accuracy, test method through tolerance analysis, and heat treatment quality. Conclusion: This paper contributed to general counterplan of the strengthened new Chinese regulations for towing device.