• 한국수정란이식학회지
• /
• 제25권3호
• /
• pp.155-159
• /
• 2010

The objective of this study was to determine physiological and mechanical factors effecting on the pregnancy rates following artificial insemination in dairy cattle. Estrus for artificial insemination of cows was checked whether the outflow of mucus from the elements was out flow or not. There were no significant difference of gestation rates with mucus release (31.76%) and without mucus release (24.03%). The pregnancy rates were 39.02% in 10~20mm of follicle size group and 27.08% (p<0.05) in 20~30mm diameter of the follicles. There were not different pregnancy rates between twice inseminated dairy cattle and more than 3 times inseminated cattle. The pregnancy rate was 28.57% under automatic milking system. In contrast, under artificial milking system pregnancy rate was 56.85%. Two systems significantly (p<0.05) were different. These results suggest that pregnancy rates were not effected by physiological system, but mechanical condition.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.4047-4054
• /
• 2010

실험실 규모의 모사 실험을 통하여 해양 부영양화를 촉진하는 퇴적물의 용출 특성을 연구하였다. 즉 pH, ORP, 질소성분, 인성분 등 주요 환경인자를 분석하고 그에 따른 용출율을 계산하였다. 또한 산소발생제인 과산화칼슘을 이용하여 자연적 용출의 제어효과를 분석하였다. 산소발생제 처리에 따라 호기적 조건으로의 퇴적토 환경변화가 일어났으며 COD, $NH_3$-N의 용출율이 감소하고 질산화 촉진으로 NOx 성분은 증가하였다. 총인과 인산염인도 Ca 이온의 불용화 기작에 의거 감소하였다. 이에 따라 퇴적토의 용출로 인한 해양 부영양화 억제 방법론을 정립하고자한다.

• 약학회지
• /
• 제32권1호
• /
• pp.26-39
• /
• 1988

Eudragit $RS^{\circledR}$ polymer was used as a wall material for the microencapsulation of aspirin by a phase separation method from chloroform-cyclohexane system with 5% polyisobutylene (PIB) in cyclohexane, and microcapsules obtained were evaluated by particle size analysis, scanning electron microscopy (SEM), drug release and drug stability test. With PIB as a coacervation inducing agent, smooth and tight microcapsules with less aggregation were obtained. Below 1 : 0.3 core-wall ratio, it was possible to coat individual particle. Variation of production conditions showed that increasing the proportion of wall material, particle size and wall thickness of microcapsules and the concentration of paraffin wax in cyclohexane as a sealant sustained drug release rates effectively. SEM confirmed that larger microcapsules after drug release did not rupture into smaller particles but contained a few small pores on the surface. Aspirin release from Eudragit $RS^{\circledR}$ coated microcapsules was independent of the pH of medium, and the mechanism of drug release from non-sealed and sealed microcapsules appeared to fit Higuchi matrix model kinetics. Aspirin in the mixture of aspirin microcapsules and sodium bicarbonate was by far more stable than that in the mixture of pure aspirin and sodium bicarbonate.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권6호
• /
• pp.526-529
• /
• 2006

The aim of this study was to prepare cyclosporin A-loaded liposome (CyA-Lip) as an oral delivery carrier, with their encapsulation into microspheres based on alginate or extracellular polysaccharide (EPS) p-m10356. The main advantage of liposomes in the microspheres (LIMs) is to improve the restricted drug release property from liposomes and their stability in the stomach environment. Alginate microspheres containing CyA-Lip were prepared with a spray nozzle; CyA-Liploaded EPS microspheres were also prepared using a w/o emulsion method. The shape of the LIMs was spherical and uniform, and the particle size of the alginate-LIMs ranged from 5 to $10\;{\mu}m$, and that of the EPS-LIMs was about $100\;{\mu}m$. In a release test, release rate of CyA in simulated intestinal fluid (SIF) from the LIMs was significantly enhanced compared to that in simulated gastric fluid (SGF). In addition, the CyA release rates were slower from formulations containing the liposomes compared to the microspheres without the liposome. Therefore, alginate-and EPS-LIMs have the potential for the controlled release of CyA and as an oral delivery system.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.247.2-247
• /
• 2001

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2004년도 추계학술논문발표회 논문집
• /
• pp.37-42
• /
• 2004

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.217-218
• /
• 2018

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.2306-2310
• /
• 2010

상수도관의 부식은 수돗물이 공급되는 과정에서 관 표면의 금속과 물 사이의 일련의 복잡한 산화/환원 반응이다. 부식으로 인해 발생할 수 있는 1차적인 고려사항은 철, 납, 동과 같은 독성이 있는 중금속이 물속에 존재할 수 있다는 것이며, 이는 상수도관에 악영향을 미치며, 세탁물을 훼손하거나 맛을 낼 수 있는 심미적인 문제도 발생된다. 본 연구에서는 부식억제제가 상수도관의 부식도, 수돗물 중의 철 및 동의 용출 농도에 어떠한 영향을 미치는지에 대해서 평가하였다. 부식저감 효과는 인산염계 부식억제제와 큰 관련성이 있었다. 부식반응은 물과 관의 표면에서 이루어지는 일련의 전기화학적인 반응임을 고려하면 철의 용출농도와 부식도는 양(+)의 상관관계에 있다.

• 공업화학
• /
• 제10권2호
• /
• pp.201-205
• /
• 1999

Hydroxypropylmethylcelluloses (HPMC)는 친수성 cellulose 계통의 중합체로서 독성이 적고 가격이 저렴하여 경구용 서방출성 제제에 널리 이용되고 있다. 본 연구에서는 매트릭스로서 HPMC를 이용하여 새로운 서방출성제제인 HPMC/염산슈도에페드린계를 설계하고, 직타법에 의하여 정제를 제조하였으며, 이 팽윤될 수 있는 친수성 약물전달계를 이용하여 약물의 방출에 영향을 주는 여러 인자들이 약물의 방출속도에 미치는 영향에 대하여 조사하였다. 결과로서, HPMC/염산슈도에페드린계에서 매트릭스인 HPMC의 분자량이 클수록, HPMC의 함량이 많을수록 약물의 방출속도가 더 느려짐을 알 수 있었으며, 정제의 경도나 용출시 pH 변화에는 무관한 것으로 나타났다. 특히, 음이온 계면활성제인 sodium laurylsulfate는 HPMC로부터 염산슈도에페드린의 방출속도를 지연시키는데 큰 영향을 미치는 것으로 나타났으며, 이러한 현상은 음이온 계면활성제인 sodium laurylsulfate가 반대의 이온성을 갖는 약물인 염산슈도에페드린과 착물을 형성함으로써 약물의 용해성이 떨어져서 약물방출이 지연되는 것으로 생각된다.

• 대한기계학회논문집B
• /
• 제32권6호
• /
• pp.413-420
• /
• 2008

The unsteady heat release characteristics play a significant role in combustion instabilities observed in low emissions gas turbine combustors. Such combustion instabilities are often caused by coupling mechanisms between unsteady heat release rates and acoustic perturbations. A generalized model of the turbulent flame response to acoustic perturbations is analytically formulated by considering a distributed heat release along a curved mean flame front and using the flame's kinematic model that incorporates the turbulent flame development. The effects of the development of flame speed on the flame transfer functions are examined by calculating the transfer functions with a constant or developing flame speed. The flame transfer function due to velocity fluctuation shows that, when a developing flame speed is used, the transfer function magnitude decreases faster with Strouhal number than the results with a constant flame speed at low Strouhal numbers. The flame transfer function due to mixture ratio fluctuation, however, exhibits the opposite results: the transfer function magnitude with a developing flame speed increases faster than that with a constant flame speed at low Strouhal numbers. Oscillatory behaviors of both transfer function magnitudes are shown to be damped when a developing flame speed is used. Both transfer functions also show similar behaviors in the phase characteristics: The phases of both transfer functions with a developing flame speed increase more rapidly than those with a constant flame speed.