• 제목/요약/키워드: Release Time

검색결과 1,896건 처리시간 0.026초

결함유형에 따른 소프트웨어 신뢰도와 소프트웨어 상품화 최적 시기 전략 (A Cost-Reliability Model for the Optimal Release Time of a Software System)

  • 김영휘;이완형
    • 한국국방경영분석학회지
    • /
    • 제16권2호
    • /
    • pp.135-150
    • /
    • 1990
  • This paper classifies faults into three types : simple, degenerated, and regenerated faults. This paper also deals with the characteristics of each type of fault to determine the software reliability based on the assumption; i. e., a system consisting of several subsystems (modules) which may be debugged simultaneously. For each type of fault, several formulas are developed to obtain the failure rate and the expected number of failures found during debugging. A model is developed based on the formulas of the failure rate and the expected number of failures to decide the optimal release time of a new software: minimizing the total cost with constraints restricting to the failure rate of each module in the software. By using this model, optimal release times are found for some cases; the eliminated faults are assumed simple faults only, regenerated faults only, simple and degenerated faults, and so on.

  • PDF

화재감지 센서 작동시간 및 열방출률에 대한 실험연구 (A Experimental Study on the Heat Release Rate to activate Fire Detection Sensor)

  • 홍성호
    • 전기학회논문지
    • /
    • 제61권9호
    • /
    • pp.1358-1361
    • /
    • 2012
  • This paper presents a study on the analysis for activation time and threshold value of heat detection sensor using HRR(Heat Release Rate). And it is represented to quantity of heat to activate heat detection sensor. The experiment is conducted to measure activation time and HRR of fire detection sensor burning alcohol and n-heptane. In order to burn the alcohol and n-heptane using $43.5cm(L){\times}43.5cm(W){\times}5cm(D)$ and $33cm(L){\times}33cm(L){\times}5cm(D)$ steel pan and the quantity of alcohol and n-heptane are 2.5 L and 650 g, respectively. The results show that peak HRR are in case of alcohol 66.13 kW and in case of n-heptane 151.64 kW, respectively. Total heat releases of heat detection sensor are in case of alcohol approximately 20.7 MJ and in case of n-heptane approximately 18 MJ, respectively.

On the use of spectral algorithms for the prediction of short-lived volatile fission product release: Methodology for bounding numerical error

  • Zullo, G.;Pizzocri, D.;Luzzi, L.
    • Nuclear Engineering and Technology
    • /
    • 제54권4호
    • /
    • pp.1195-1205
    • /
    • 2022
  • Recent developments on spectral diffusion algorithms, i.e., algorithms which exploit the projection of the solution on the eigenfunctions of the Laplacian operator, demonstrated their effective applicability in fast transient conditions. Nevertheless, the numerical error introduced by these algorithms, together with the uncertainties associated with model parameters, may impact the reliability of the predictions on short-lived volatile fission product release from nuclear fuel. In this work, we provide an upper bound on the numerical error introduced by the presented spectral diffusion algorithm, in both constant and time-varying conditions, depending on the number of modes and on the time discretization. The definition of this upper bound allows introducing a methodology to a priori bound the numerical error on short-lived volatile fission product retention.

Dextran을 기초로 한 고분자 Matrix로 부터의 Silver Sulfadiazine의 방출 특성 (Release Characteristics of Silver Sulfadiazine from Dextran-based Polymeric Matrices)

  • 나재운;박영훈;김성현;김선일
    • 공업화학
    • /
    • 제7권4호
    • /
    • pp.735-742
    • /
    • 1996
  • 장시간에 걸쳐 약물의 흡수가 일어날 수 있는 고분자 matrix을 개발하고자, 글리세린과 증류수를 혼합 교반 시킨 후, 분자량이 서로 다른 세 종류의 dextran을 각각 첨가하여 용해시켰다. 이 용액에 silver sulfadiazine을 분산시켜 matrix를 제조하였다. 이렇게 제조된 고분자 matrix로부터 약물 방출 양상을 규명하기 위해 인산염 완충용액 중에서 약물의 함유량 변화, dextran의 분자량 변화 및 글리세린의 농도 변화에 영향을 미치는 인자들에 관하여 연구 검토한 바 다음과 같은 결론을 얻었다. 고분자 matrix내의 silver sulfadiazine의 함유량이 증가할수록 약물 방출 지속 시간은 11.2일, 14.0일 및 15.8일로 지연되었다. Dextran의 분자량 변화에 대해서는 약 14.0일로 거의 같은 약물 방출 pattern을 보임으로써 겉보기 방출속도상수 (K)값과의 관계와 일치하는 결과를 얻었다. 그러나 글리세린의 함유량이 증가함에 따라 약물 방출 지속 시간은 각각 18.0일, 17.0일, 14.0일, 13.0일 및 10.0일로 감소하였다.

  • PDF

Role of Gap Junction in the Regulation of Renin Release and Intracellular Calcium in As 4.1 Cell Line

  • Han, Jeong-Hee;Hong, Bing-Zhe;Kwak, Young-Geun;Yuan, Kui-Chang;Park, Woo-Hyun;Kim, Sung-Zoo;Kim, Suhn-Hee
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제11권3호
    • /
    • pp.107-112
    • /
    • 2007
  • Gap junction protein, connexin, is expressed in endothelial cells of vessels, glomerulus, and renin secreting cells of the kidney. The purpose of this study was to investigate the role of gap junction in renin secretion and its underlying mechanisms using As 4.1 cell line, a renin-expressing clonal cell line. Renin release was increased proportionately to incubation time. The specific gap junction inhibitor, 18-beta glycyrrhetinic acid (GA) increased renin release in dose-dependent and time-dependent manners. Heptanol and octanol, gap junction blockers, also increased renin release, which were less potent than GA. GA-stimulated renin release was attenuated by pretreatment of the cells with amiloride, nifedipine, ryanodine, and thapsigargin. GA dose-dependently increased intracellular $Ca^{2+}$ concentration, which was attenuated by nifedipine, nimodipine, ryanodine, and thapsigargin. However, RP-cAMP, chelerythrine, tyrphostin A23, or phenylarsine oxide did not induced any significant change in GA-stimulated increase of intracellular $Ca^{2+}$ concentration. These results suggest that gap junction plays an important role on the regulation of renin release and intracellular $Ca^{2+}$ concentration in As 4.1 cells.

Preparation and In Vitro Release of Ramose Chitosan-Based-5-Fluorouracil Microspheres

  • Li, He-Ping;Li, Hui;Wang, Zhou-Dong;Zhang, Juan-Juan;Deng, Man-Feng;Chen, San-Long
    • 대한화학회지
    • /
    • 제57권1호
    • /
    • pp.88-93
    • /
    • 2013
  • In order to construct a controlled release system of drugs and to reduce toxic side effects of 5-fluorouracil, the novel ramose chitosan-based-5-fluorouracil microspheres (CS-FU-MS) were prepared. Firstly, using chitosan (CS) as carriers and 5-fluorouracil (5-FU) as a model drug, ramose chitosan-based-5-fluorouracil (CS-FU) was efciently synthesized by chemical crosslinking method through microwave irradiation, drug loading was 10.6%; Secondly, CS-FU-MS were prepared by CS-FU self-assembled under the dialysis conditions and the free 5-FU was encapsulated further at the same time. The size dispersivity of particles is uniform, and the average diameter of the CS-FU-MS was $4{\mu}m$. The drug encapsulation efficiency was 76.1%, and the drug loading was increased to 26.22%. CS-FU-MS maintain the zero-order release time in PBS (pH = 7.4) and HCl/KCl (pH = 1.2) dialysis medium was 40h and 34h respectively, and the cumulative release were 58.89% and 79.33% in 182 h. The results showed that CS-FU-MS have excellent sustained release properties.

Influence of Cytisine on Catecholamine Release in Isolated Perfused Rat Adrenal Glands

  • Lim, Dong-Yoon;Jang, Seok-Jeong;Kim, Kwang-Cheol
    • Archives of Pharmacal Research
    • /
    • 제25권6호
    • /
    • pp.932-939
    • /
    • 2002
  • The aim of the present study was to determine the characteristics of cytisine on the secretion of catecholamines (CA) in isolated perfused rat adrenal glands, and to clarify its mechanism of action. The release of CA evoked by the continuous infusion of cytisine ($1.5{\times}10^{-5} M$) was time-dependently reduced from 15 min following the initiation of cytisine infusion. Furthermore, upon the repeated injection of cytisine ($5{\times}10^{-5}$), at 30 min intervals into an adrenal vein, the secretion of CA was rapidly decreased following the second injection. Tachyphylaxis to the release of CA was observed by the repeated administration of cytisine. The cytisine-induced secretion of CA was markedly inhibited by pretreatment with chlorisondamine, nicardipine, TMB-8, and the perfusion of $Ca^{2+}$-free Krebs solution, while it was not affected by pirenzepine or diphenhydramine. Moreover, the secretion of CA evoked by ACh was time-dependently inhibited by the prior perfusion of cytisine ($5{\times}10^{-6} M$). Taken together, these experimental data suggest that cytisine causes secretion of catecholamines from the perfused rat adrenal glands in a calcium-dependent fashion through the activation of neuronal nicotinic ACh receptors located in adrenomedullary chromaffin cells. It also seems that the cytisine-evoked release of catecholamine is not relevant to the activation of cholinergic M$_1$-muscarinic or histaminergic receptors.

치주인대세포(齒周靭帶細胞)의 생화학적(生化學的) 특이성(特異性)에 대(對)한 연구(硏究) (BIOCHEMICAL CHARACTERISTICS OF HUMAN PERIODONTAL LIGAMENT CELLS IN VITRO)

  • 조성욱;차경석
    • 대한치과교정학회지
    • /
    • 제22권1호
    • /
    • pp.273-283
    • /
    • 1992
  • To find out the differences between periodontal ligament cells (PDL cells) and gingival fibroblast cells (GFB cells), alkaline phosphatase, a marker enzyme for osteoblast, was used to measure the activities and $^{45}CaCl_2$ isotope was used to find out cellular and release of $^{45}Ca$, a requisite for bone formation,. PDL cells and GFB cells from 1 to 5 passages were also measured in alkaline phosphatase activity assay. By the use of above methods, followings were concluded that the PDL cells and the GFB cells have characteristics that are different from each other. In that PDL cells showed large amount of calcium uptake and large amount of calcium release in initial stage, they seem to possess characteristics which are similar to osteoblast-like cells. 1. The PDL cells, in contrast to the gingival fibroblast, showed exceedingly high alkaline phosphatase activity which was highest at the second passage, decreasing thereon. But gingival fibroblasts cells showed no distinct differences in alkaline phosphatase activity as the passage were elapsed. 2. For both PDL cells and GF cells, the $^{45}Ca$ uptake was greatest at 2 hours period. The PDL cells showed higher measuring than GFB cells through out the whole time period. 3. Whereas the GFB cells showed slow increase of $^{45}Ca$ release as time relapsed, the PDL cells showed rapid increase of $^{45}Ca$ release.

  • PDF

고분자 코팅을 이용한 경구용 리포좀의 개발(I): 다당체로 코팅된 리포좀의 담즙산염에 대한 안정성 (Polymer-Coated Liposomes for Oral Drug Delivery (I): Stability of Polysaccharide-Coated Liposomes Against Bile Salts)

  • 최영욱;한양희
    • Journal of Pharmaceutical Investigation
    • /
    • 제22권3호
    • /
    • pp.211-217
    • /
    • 1992
  • Stabilization of liposomes against degradation by bile salts has been investigated in order to develop a liposomal model system for oral drug delivery. Two polysaccharides, amylopectin (AP) and chitin (CT), were employed to coat both empty liposomes and bromthymol blue (BTB)-encapsulated liposomes by adsorption-coating techniques. Turbidity changes and BTB-release characteristics in pH 5.6 buffer solutions with or without bile salts, sodium cholate and sodium glycocholate, were observed to compare the differences between uncoated liposomes and polysaccharide-coated liposomes. Initial turbidities of both uncoated and polysaccharide-coated liposomes in buffer solution were kept constant within 3% range during 4 hours of experiments. But they were decreased in a different manner in bile salts-containing buffer solutions, showing 10% or less decrease for polysaccharide-coated liposomes and 25% or more decrease for uncoated liposomes. BTB release from uncoated liposomes has been greatly increased upto 90% after 4 hours in bile salts-containing buffer solution, which is a clue for breakdown of liposomal vesicles. However, polysaccharide-coated liposomes showed the controlled-release pattern which is proportional to square-root of time, followed by around 50% release for the same time period. Consequently, it is possible to conclude that these polysaccharide-coated liposomes might be an available system for oral delivery of a drug which is unstable in gut environment.

  • PDF

Ignition and Heat Release Rate of Wood-based Materials in Cone Calorimeter Tests

  • Park, Joo-Saeng;Lee, Jun-Jae
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권2호
    • /
    • pp.1-8
    • /
    • 2008
  • This study was performed to evaluate the burning characteristics of wood-based materials and the effect of surface treatment of fire retardant using cone calorimeter. Four types of wood-based materials, such as Plywood, Oriented Strand Board (OSB), Particle Board (PB) and Medium Density Fiberboard (MDF), were tested at a constant heat flux of $50kW/m^2$ to investigate the time to ignition, mass loss rate, heat release rate, effective heat of combustion, etc. In addition, each type of wood-based material was tested at the same heat flux after fire retardant treatment on the surface to evaluate the effect of this treatment on the burning characteristics. The surface treatment of fire retardant, by the amount of $110g/m^2$, delayed the time to ignition almost twice. However, it was indicated that heat release rate, mass loss rate, and effective heat of combustion were not significantly affected by fire retardants treatment for all types of wood-based materials.