• 전자공학회논문지A
• /
• 제32A권7호
• /
• pp.36-42
• /
• 1995

In this paper, the CAD program for designing the microwave waveguide narrow-band bandpass filters has been developed by the passband correction method with filter synthesis for the MDR(Microwave Digital Relay) system. Here, the modified double E-plane structures are employed in the filter structure which is analyzed by the variational method. Using the developed CAD program, 0.01dB equi-ripple chebyshev type 6-section bandpass filters used in the MDR system operating nationally is designed at the center frequency of 11.0GHz, fabricated with tunable type and then measured by tuning process. The experimantal results show good agreements with the theoretical results.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.6-12
• /
• 2014

The safety and reliability of the power system short-circuit current, the short-circuit current depends on the failure to obtain the objective is to quickly eliminate the breaking capacity of the circuit-breaker selection of the cable, the insulation of electrical equipment and protective relay an important factor in determining the level correction and protective relay selection scheme to be meaningful. Standards used in the domestic circuit breaker is applied to the production of IEC standard, but the American National Standards (ANSI / IEEE) by NEMA specification of the fault current calculations and the application of the asymmetric coefficient Korea. Therefore, in this paper, the IEC 60909 standard IEC breaker fault current calculation method and the method for selection of system configurations reviewed and protection system for reviewing the configuration of various protective relays appropriate correction and the correction value is main protection, back-up protection the equipment so that the period of protection relay coordination to minimize accidents and accident protection to minimize interruptions proposed for cooperation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.606-615
• /
• 2006

This study identifies the comparison of Technical specification and Characteristics of DC Protection Relay(ETCPU200) used in DC Distribution System in Korea. ETCPU200 has completed Field Test and approved its capability by finding out causes of recent operations through lately developed digital DC protection relay in parallel operation at Maebong-Substation, Nakseongdae-Substation, Euljirosaga-Substation, Jegi-Substation and Chongryangri T/P area. It also examines additional features for efficient System Analysis and Operations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.229-231
• /
• 1998

One of the most important requirements for the development of computerized relay setting system is its openness to accommodate the various changes like new panel additions. This paper describes the relay setting system(PROSET2000), which has an open system architecture and adopts the object oriented programming paradigm. Its main features include the intelligent fault type identification, automatic running of the short circuit analysis, run-time rulebase modification, automatic documentation, etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1792-1795
• /
• 1997

It is difficulte to control in the flow system because there are many disturbance. So it is impossible to control delicately sometimes by PI or PID. In this paper, we study on the application of intellignet control algorithms such as 2DOF PID control, neural network, Fuzzy contro, Relay feedback to the flow control system. the resultings are 2DOF-PID control is more good response.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권2호
• /
• pp.117-124
• /
• 2012

A client collaboration (CC) system is proposed for a user relay system. The proposed scheme focuses on the management of transmit power and leakage interference. In the proposed CC system, edge users transmit signals to the masters considered as user relays. The masters relay the signals of the edge users to the base station using the resource blocks (RBs) that are assigned to the edge users. The leakage interference and power consumption were analyzed in the CC system. In addition, an optimal master location problem was formulated based on the signal-to-leakage-plus-noise ratio (SLNR). Because the optimal master location problem is quite complex, a sub-optimal master location problem was proposed and a closed-form sub-optimal master location was obtained. The edge users generate smaller leakage interference and power consumption in the proposed CC system compared to the system without the CC. The numerical results showed that the edge users generate smaller leakage interference and power consumption in the proposed CC system compared to the system without the CC, and the average throughput increases.

• 한국인터넷방송통신학회논문지
• /
• 제11권2호
• /
• pp.29-34
• /
• 2011

본 논문에서는 각 홉에서 다중 안테나를 가지는 노드 간 채널 환경을 고려하여 가장 좋은 성능을 가지는 하나의 안테나와 하나의 중계기를 동시에 선택하는 시스템을 제안하며, 제안된 시스템의 성능을 분석한다. 다중 채널을 통해 다수의 수신 신호를 받아 MRC(Maximal Ratio Combining) 기법을 이용하여 다이버시티를 얻는 일반적인 시스템은 상대적으로 열악한 채널을 통과하는 신호 또한 수신하며, 이는 곧 시스템의 성능 저하로 이어지는 결과를 얻는다. 제안하는 시스템은 송신단-중계기, 중계기-수신단 간의 모든 채널 환경을 고려하여 가장 좋은 채널을 통해서만 데이터를 전송함으로써 열악한 채널을 통과하는 신호의 수신을 차단함으로써 성능을 향상시킨다. 따라서 가장 좋은 채널상의 안테나와 중계기를 동시에 선택하는 과정을 거치며, 이를 구현하기 위해 단일 중계기만을 선택하고 각 홉에서는 단일 안테나만을 이용할 수 있는 알고리즘을 제안한다.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.270-275
• /
• 2010

In a conventional opportunistic transmit (COT) cooperative relaying system, only the relays that receive signal-to-noise ratio (SNR) from the source and that exceed the threshold transmit to the destination. The COT system, however, only considers the SNR of the source-relay (S-R) path regardless that the SNR of the relay-destination (R-D) path is the opportunistic transmission condition. For that reason, it is not guaranteed that all the transmitted signals from relays exceed the threshold at the destination. Therefore we propose a double opportunistic transmit (DOT) cooperative relaying system - when both of the received SNR from a source and from a destination exceed the threshold, the relay transmits to the destination. It is shown that the proposed DOT system reduces power consumption by 6.9, 20.9, 32.4, and 41.4 % for K =3, 5, 7, and 9, respectively under the given condition of $P_{out}=1{\times}10^{-3}$ and $\overline{\gamma}_{SR}/\Gamma_{SR}$=30 dB, compared to the COT system. We noticed that the performance of the DOT system is superior to that of the COT system for the identical number of active transmit relays under the same condition of the normalized average SNR of $\overline{\gamma}_{RD}/\Gamma_{RD}$.

• ETRI Journal
• /
• 제46권2호
• /
• pp.184-193
• /
• 2024

This paper presents the performance evaluation of an amplify-and-forward (AF) relay-assisted multiuser multiple input-multiple output (MU-MIMO) downlink transmission system for correlated fading channels. The overall system performance was improved by incorporating a double-quadrature spatial modulation (DQSM) scheme. The bit error rate (BER) performance and detection complexity of the AF-MU-MIMO-DQSM system were analyzed and compared with those of a conventional AF-MU-MIMO system under the same conditions and parameters. The results showed that the correlated fading channel severely affected the performance of systems with higher spectral efficiency (SE). Considering an SE of 12 bpcu/user, the AF-MU-MIMO-DQSM system yielded a gain of up to 3 dB in BER performance compared with that of its conventional counterpart for the analyzed cases. In terms of detection complexity, the AF-MU-MIMO-DQSM system showed a reduction of up to 56 % compared with that of the conventional system for the optimal maximum likelihood detection criterion.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제6권5호
• /
• pp.211-218
• /
• 2017

최근 로봇 소프트웨어 플랫폼의 연구는 로봇 기기들의 추상화를 통해 지능형 서비스를 제공하는데 초점을 두고 있다. 사물인터넷 환경에서 지능형 로봇 서비스를 제공하기 위해서는 이기종 센서들의 환경정보를 인지하는 상황인지 기술이 필요하다. ROS는 로봇 디바이스를 추상화하는 기술을 바탕으로 로봇을 사용한다. ROS는 로봇을 제어하기 위해 이기종 센서 자체를 추상화하는 기능을 포함하고 있으나, 일관된 수집 방법을 통한 환경 정보를 바탕으로 로봇이 인지할 수 있는 상황 정보를 제공하는 기능은 결여되어 있다. 따라서 본 논문에서는 ROS가 상황인지 기반의 로봇 서비스를 제공하는데 필요한 중계 시스템을 제안한다. 제안하는 시스템은 로봇이 인지할 수 있는 추상화된 상황정보를 제공하는 외부의 상황인지 시스템과 로봇을 제어하는 ROS를 중계하여, ROS가 상황인지 로봇 서비스를 제공할 수 있도록 도와준다. 실험에서는 제안하는 시스템을 바탕으로, 상황인지 시스템과 ROS에서 추상화된 로봇 서비스를 연동하여 로봇 서비스를 실행시키는 과정을 보인다.