• Journal of Theoretical and Applied Mechanics
• /
• 제1권1호
• /
• pp.69-88
• /
• 1995

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. Through previous stress analysis related to the present physical model, the relaxation time is defined by ${\alpha}$2 which satisfies the equation $\Gamma$0 ｜1+${\alpha}$2k｜m=1-${\alpha}$2 [19]. $\Gamma$0=2(1/√3)1+m($\sigma$$\infty$/2${\mu}$)m($\sigma$0/$\sigma$$\infty$tm) where $\sigma$$\infty$ is an applied stress, ${\mu}$ is a shear modulus of a matrix, $\sigma$$\infty$ is a material constant of a power law particle, $\sigma$=$\sigma$0 $\varepsilon$ and t elapsed time. the volume free energy associated with Helmholtz free energy includes strain energies associated with Helmholtz free energy includes strain energies caused by applied stress anddislocations piled up in interface (DPI). The energy due to DPI is found by modifying the results of Dundurs and Mura[20]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(${\gamma}$) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius ${\gamma}$ and incubation time t to maximize Helmholtz free energy is found in present analysis. Also, kinetics of cavity fourmation are investigated using the results obtained by Riede[16]. The incubation time is defied in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that [1] strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius ${\gamma}$ decreases or holds constant with increase of time until the kinetic condition(eq.40) is satisfied. Therefore the cavity may not grow right after it is formed, as postulated by Harris[11], and Ishida and Mclean[12], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f) and particle size on the incubation time are estimated using material constants of the copper as matrix.

• 대한토목학회논문집
• /
• 제29권4A호
• /
• pp.291-297
• /
• 2009

실험을 통해 고장력 볼트의 릴렉세이션를 측정하였다. 종류와 표면 처리가 다른 볼트를 사용하여 체결길이가 서로 다른 블록형태와 겹침이음형태의 시험체를 조립하였다. 항온항습실에서 시간 경과에 따라 볼트에 도입된 축력을 변형률 게이지를 통하여 측정하였다. 볼트축력의 감소율은 모든 시험체에서 10% 미만으로 나타났다. 결합 형태, 볼트종류, 체결길이 그리고 볼트의 표면 처리가 서로 다른 여러 경우에 대해 실험결과를 이 연구에서 제안한 릴렉세이션 추정 모델을 이용하여 비교, 검토하였다. 제안한 모델은 여러 경우에 대한 실험 결과와 모두 합리적으로 잘 합치하고 있다. F13T와 F10T 볼트사이에 차이점을 발견할 수 없으나 다크로 볼트의 최종 체결력 감소율은 일반 볼트보다 30% 정도 높으며, 또한 전체적으로 볼트 체결길이가 짧아짐에 따라, 전단면의 수가 증가함에 따라 높아지는 경향을 보여주고 있다.

• 설비공학논문집
• /
• 제2권1호
• /
• pp.37-48
• /
• 1990

The drag and heat transfer reduction phenomena and degradation effects of drag reducing polymer solutions which are known as the viscoelastic fluids are investigated experimentally for the turbulent circular tube flows. Two stainless steel tubes are used for the experimental flow loops. Aqueous solutions of Polyacrylamide Separan AP-273 with concentrations from 300 to 1000 wppm are used as working fluids. Flow loops are set up to measure the friction factors and heat transfer coefficients of test tubes in the once-through system and the recirculating flow system. Test tubes are heated by power supply directly to apply constant heat flux boundary conditions on the wall. Capillary tube viscometer and falling ball viscometer are used to measure the viscous characteristics of fluids and the characteristic relaxation time of a fluid is determined by the Powell-Eyring model. The order of magnidude of the thermal entrance length of a drag reducing polymer solution is close to the order of magnitude of the laminar entrance length of Newtonian fluids. Dimensionless heat transfer coefficients of the viscoelastic non-Newtonian fluids may be represented as a function of flow behavior index n and newly defined viscoelastic Graetz number. As degradation continues viscosity and the characteristic relaxation time of the testing fluids decrease and heat transfer coefficients increase. The characteristic relaxation time is used to define the Weissenberg number and variations of friction factors and heat transfer coefficients due to degradation are presented in terms of the Weissenberg number.

• 접착 및 계면
• /
• 제23권2호
• /
• pp.39-43
• /
• 2022

디스플레이, 태양전지와 같이 전기를 빛으로, 또는 빛을 전기로 변환시켜주는 광전자소자는 효율 향상을 위하여 빛의 거동 제어가 매우 중요하다. 즉, OLED의 경우 내부 빛 제어를 통해 더 많은 빛이 외부로 나갈 수 있도록 유도해 줄 때 발광효율을 향상시킬 수 있으며, 외부 빛 제어를 통해 광흡수층에서의 광경로를 증대시킬 경우 태양전지의 에너지 변환효율을 증가시킬 수 있다. 본 연구에서는 이러한 광거동 제어가 가능한 구조로서 주름구조에 대한 연구를 진행하였으며 응력 해소 시간을 제어하여 구조의 주기와 높이를 독립적으로 제어하고자 하였다. 주기와 높이의 변화가 광거동에 어떠한 영향을 미치는지 살펴보기 위하여 일정한 주기에서 높이 변화 및 유사한 높이에서 주기 변화에 따른 자외선/가시광선 분광분석(UV/Vis spectroscopy)을 실시하였으며 구조의 종횡비가 클수록 직진광의 비율이 낮고 분산광의 비율이 높음을 확인하였다. 이를 통해 광경로 변화 및 광경로 증가를 위하여 큰 종횡비의 주름구조가 요구됨을 확인할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제28권3호
• /
• pp.253-260
• /
• 2003

In this study, the feasibility of magnetic resonance techniques for nondestructive internal quality evaluation of Korean red ginseng was examined. Relaxation time constants were measured using various grades of red ginsengs. Solid state magnetic resonance imaging technique was applied to image dried red ginsengs which have low moisture contents (about 13%). A 7 tesla magnetic resonance imaging system operating at a proton resonant frequency of 300 ㎒ was used for acquiring MR images of dried Korean red ginseng. The comparison test of cross cut digital images and magnetic resonance images of heaven grade, good grade with cavity inside, and good grade with white part inside red ginseng suggested the feasibility of the internal quality evaluation of Korean red ginsengs using MRI techniques. A good grade red ginseng included abnormal tissues such as cavities or white parts inside was observed by the signal intensity of MR image based on magnetic resonance properties of proton nucleus. Analysis on an one dimensional profile of acquired MR image of Korean red ginseng showed easy discrimination of normal and abnormal tissues. MR techniques suggested ways to detect internal defects of red ginsengs effectively.

• Journal of Biosystems Engineering
• /
• 제28권2호
• /
• pp.157-166
• /
• 2003

The purpose of this study is to characterize the internal physical properties of fresh Korean ginsengs (Panax ginseng C.A. Meyer) through a magnetic resonance imaging (MRI) technique. Current external visual inspection cannot determine internal quality of ginsengs successfully. Relaxation time constants, T$_1$ and T$_2$*, were obtained from a series of MR images. Calculated Ti values were varied with different physiological states of ginseng tissues. Internal imaging information was obtained nondestructively from fresh ginsengs. One- and two-dimensional image analyses were performed. One-dimensional image analysis showed a potential of age identification of ginsengs rapidly. Internal quality of normal and abnormal ginsengs was evaluated using two-dimensional MR images. Various types of internal defects such as internal cavity and rotten spot were visualized clearly. The MRI technique had a feasibility to detect internal defects of fresh ginsengs effectively.

• 대한전자공학회논문지TE
• /
• 제37권2호
• /
• pp.1-5
• /
• 2000

금속이온 농도를 변화시켰을때의 IMI-O 고분자 LB막에 대한 단분자막의 거동과 MIM구조의 LB막 소자에 대한 전기 특성 및 유전 특성을 조사하였다. π-A 등온선의 측정에서 금속 이온 농도가 증가함에 따라 단분자가 차지하는 극한 단면적이 증가하였다. 이러한 변화는 금속이온 농도 변화에 따른 금속이온의 강도 증가에 의한 단분자막의 거동의 차이에 의한 것으로 생각된다. 전압-전류 특성에서 ohmic 영역의 기울기로부터 구한 전기전도도는 금속 이온의 농도가 증가할 수록 증가하였다. 이것은 전개분자와 금속이온간의 결합에 의한 극한 단면적의 변화가 전기전도도에 직접적인 관계가 있기 때문으로 생각된다. 한편, 유전 특성에서 금속이온의 농도가 증가할 수록 허수부 유전율이 최대가 되는 주파수 역시 증가하였다. 따라서 금속이온의 증가에 의해 완화시간 γ가 감소되는 것을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.303-308
• /
• 2002

A governing differential equation (GDE) of PSC flexural member with constant eccentricity considering the long-term losses including concrete creep, shrinkage, and PS steel relaxation is derived based on the two approaches. The first approach utilizes the force and moment equilibrium equations derived based on the geometry of strains of the uniform and curvature strains while the second one utilizes the principle of minimum total potential energy formulation. The identity of the two GDE's is verified by comparing the coefficients consisting of the GDE's. The boundary conditions resulting from the functional analysis of the variational calculus are investigated. Rayleigh-Ritz method provides a way to get the explicit form of the continuous deflection function in which the total potential energy is minimized with respect to the unknown coefficients consisting of the trial functions. As a closure, the analytically calculated results are compared with the experiments and show good agreements.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.326-332
• /
• 2008

In this work CdS films were prepared by using chemical bath deposition, which is simple and inexpensive technique suitable for large deposition area. Annealing in air at different temperatures (300, 350, 400, 450 and $500^{\circ}C$) at constant time of 30 min, also for different times (15, 30, 45, 60 and 90 min) at constant temperature ($300^{\circ}C$) is achieved. X-Ray analysis has confirmed the formation of cadmium oxide (CdO) with slight increase in grain size, shift towards lower scattering angle due to relaxation in the tensile strain for deposition films, and structure change from cubic and hexagonal to the hexagonal. From electrical properties, significant increase in electrical conductivity appeared in samples annealed at $300^{\circ}C$ for 60 min, and at $350^{\circ}C$ for 30 min.

• Rapid Communication in Photoscience
• /
• 제3권4호
• /
• pp.85-87
• /
• 2014

We studied the characteristics of emissive state of the first (p-G1) and second (p-G2) generation of phenylacetylene dendrimers bearing stilbene as a core by using time-resolved fluorescence spectroscopy in cyclohexane (c-Hex) and N, N-dimethylformide (DMF), which are nonpolar and polar solvents, respectively. Time-dependent red-shift of emission spectra p-G2 both in c-Hex and DMF was observed in comparison with p-G1. Besides, the time constant of red-shift of spectra was found to be larger in DMF than in c-Hex. This indicates that the emissive state of p-G2 has a polar character in DMF as a result of charge delocalization from core to peripheral dendrons followed by stabilization of emissive state.