• Journal of Environmental Science International
• /
• v.26 no.5
• /
• pp.585-590
• /
• 2017

The Diameter at Breast Height (DBH) provides information about the volume growth of a tree. In this study, we estimated the relative growth rates of Castanea crenata and Pinus rigida as 4.07% and 3.73%, respectively. Although the difference was low, we demonstrated that the growth rate of C. crenata is slightly faster than that of P. rigida. After calculating the relative growth rate for each section, we found that the relative growth of C. crenata decreased with time. However, the relative growth rate of P. rigida showed an overall increase. The gap widths of both species showed an increasing trend. However, the gradient of the two species was different. The gradient of C. crenata was approximately 12.0, but that of P. rigida was approximately 4.7. This means that the volume growth of C. crenata was faster than that of P. rigida during 4 years. However, this was relatively a short period for measuring the volume growth pattern, and we believe that additional useful information can be obtained by conducting long-term ecological monitoring. Results of canonical correspondence analysis showed that among the climate variables, temperature was significantly related to the gap widths for both species.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.916-919
• /
• 2003

In this paper, we deal with a development of measurement system to apply the leakage rates test of primary containment in nuclear power plant. The measurement test about leakage rates in primary containment is one sort of test to prove safety of nuclear power plant. The parameters which are measured to calculate leakage rates are drybulb temperature, dew point temperature(or relative humidity), absolute pressure and flow. Overall, the measurement system consists of sensor module for data acquisition of the parameters, transfer module for wireless data communication and control module to control system and to calculate leakage rates. Because existing measurement systems are difficult to set in field, we pursued convenience of use, we applied wireless data communication and individual form module using battery. We also changed for the better in confidence. Recently, we are developing a drybulb temperature and a dew point temperature sensor module. We describe about function of developed measurement system, its standard and an plan for verification of measurement system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.6
• /
• pp.773-783
• /
• 1998

The heating system for apartment complex may be classified as old systems including central system with steam boiler(S1), gas engine driven heat pump system(S2), system using waste heat(S3) and new systems including mechanical vapor re-compression system with flashing heat exchangers(S4), system using methanol(S5), system using metal hydride (S6). The purpose of the present study is to suggest optimal heating system by technically, economically and environmentally evaluating old and new heating systems of apartment complex from 500 to 3,000 households. Economic evaluation based on the technical evaluation results which estimated heat transfer area of heat exchangers and capacity of equipments was estimated initial investment cost, annual operating cost and relative payback period by considering annual increasing rates of energy cost and interest. Environmental evaluation provided annual generation rate of carbon dioxide. Initial investment cost was cheap in the order of S6, S5, S3, S2, S4, S1, annual operating cost was cheap in the order of S1, S2, S4, S5 and relative payback period was short in the order of S6, S5, S2, S3 and S4. Relative payback period was within 8 years for all scenarios of 3,000 households, and was increased as annual increasing rates of energy cost and interest were increased. As transportation pipe length was increased twice, payback period was increased by 1.4~2.6 time. The effect of temperatures of waste gas and waste water on the relative payback period was small within 0.8 years. The annual generation rate of carbon dioxide was big in the order of S4, S2 and S1. S4 was the most economic system among whole scenarios when S1 was replaced with other scenarios.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.7
• /
• pp.35-44
• /
• 2004

In this study, a ventilation model was developed to determine a ventilation rate for the balance of heat, moisture and $CO_{2}$ in a mushroom house. Internal and external temperature, relative humidity and $CO_{2}$ concentration were measured and used to validate the ventilation model. The effects of various environmental factors on physiological responses of mushroom were also investigated. The verified model was simulated under the observed ventilation rates with a difference of$ 0.001{\~}0.065\;m^{3}{\cdot}S^{-1}$ (relative error of $0.3{\~}18.9\%$) when external temperature varied 22.5 to $24.8^{circ}C$ and average ventilation rates was $0.35m^{3}{\cdot}S^{-1}$. The optimal conditions for mushroom growth (internal temperature $22 ^{circ}C$, relative humidity $80\%$, $CO_{2}$ concentration 1,000 ppm) were used for the model application with external temperature, relative humidity and $CO_{2}$ concentration of $27.5{\~}33.5^{circ}C$, $60\%$, and 355 ppm, respectively. Thermal balance was a important factor for an optimum ventilation up to the external temperature of $32^{circ}C$, while $CO_{2}$ concentration balance was more important over $32^{circ}C$. This suggests that humidification for moisture balance is required to maintain temperature and $CO_{2}$ concentration at an optimal level by ventilation in a mushroom house.

• Journal of Microbiology
• /
• v.33 no.3
• /
• pp.208-214
• /
• 1995

The effects of various 2, 4-D-degradative plasmids on the axenic growth patterns, the degradation phenotypes, and the competitiveness of different host bacteria were evaluated in liquid cultures; the organisms and plasmids used were Alcaligenes eutrophus JMP134/pJP4, Alcaligenes paradoxus/p2811, Pseudomonas pickettii/p712, pJP4, and p712 or p 2811 exhibited very different restriction fragment profiles in restriction endonuclease digests. These plasmids were transferred to the recipients (P. cepacia and Alcaligenes JMP228) at relatively high frequencies ranging from 8.9 $\times$ 10$^3$ to 1.6 $\times$ 10$^5$ per donar cell. In the axenic liquid cultures the fast-growing strains, such as P. pseudomallei/p745 and P. cepacia/pJP4, exhibited short lag periods, high specific growth rates, and high relative fitness coefficients, while the slow-growing strains, such as P. pickettii/p712 and A. paradoxus/p2811, had long lag periods, low specific growth rates, and low relative fitness coefficients. Depending on the type of plasmid containing the genes for the 2, 4-D pathway, some transconjugants exhibited intermediate grwoth patterns between the fast-growing strains and the slow-growing strains. The plasmid and plasmid-host interactions determined specific growth rate and lag time, respectively, which were shown to be principal determinants of competitiveness among the strains, but relative fitness coefficient derived from the axenic culture was not always predictive for the mixed culture condition.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.236-245
• /
• 2013

This study analyzed the relationship between elderly suicide rates and socio-economic factors from the macroscopic perspectives. As certain theoretical background of elderly suicide, sociological and economic perspectives are applied. The economic factors of elderly suicide rates consisted of economic growth and unemployment rate, economic activity rate of the aged, and relative poverty rate (income inequality rate). The sociological factors included social welfare spending, divorce rate, growth rate of population aging, and elderly dependency ratio. According to research findings, first, the more economic activity of the aged is low, the more elderly suicide rate is high. Second, the more social welfare spending rate goes flat, the more elderly suicide rate is growing. Third, the more relative poverty rate (income inequality), increasing population aging rate, and elderly dependency ratio are high, elderly suicide rate goes high at the same time. Finally, this study proposed several socio-economic policy alternatives for preventing continuous growth of Korean elderly suicide rate.

• KDI Journal of Economic Policy
• /
• v.26 no.1
• /
• pp.3-33
• /
• 2004

This paper investigates the effects of inflation on real estate prices, particularly the discrepancy between the sales and chonsei prices of housing, in an economy in which real interest rates are secularly declining due to the fall in capital productivity. When real interest rates fall, real estate prices rise relative to chonsei prices, and thus the well-known adverse effect of inflation, or the discrepancy between the value of financial assets (or chonsei principal) and the value of real assets (or real estate), is aggravated although the monetary authority maintains the same rate of inflation. This theoretical prediction can help explain the trend of the ratio of apartment sales prices to chonsei prices. That is, the stabilization of inflation relative to real interest rates appears to have contributed to the secular stabilization of this ratio in the 1990s, while the fall in real interest rates appears to have led to the rise of this ratio since 2001.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.4
• /
• pp.218-225
• /
• 1992

This experiment was carried out to compare the varietal differences of winter hardiness based on the values of winter hardiness index(W1) and the dry weight of plant per relative tiller appearance rate (DWIRTAR), and the evaluate the method of measurements for winter hardiness in 17 orchardgrass varieties grown under mountainous area of Tackwalyon, Kangwon-do. Korea. The results were summarized as follows: 1. Seedling vigours(SV) of plant before wintering indicated highly significant negative correlation with the dry weight of 1st cutting(DW) and the dry weight of plant per relative tiller appearance rates (DWIRTAR). 2. The dry weight of 1st cutting(DW) indicated significant positive correlations with the number of tillers per plant(NT). dry weight of a tiller(WT), lield survival rate(SR). heading rate(HR) and the dry weight of heading tillers(HDW). 3. Correlation coefficients of the dry weight of 1st cutting(DW) with winter hardiness index(W1) was 0.499(p<0.05), and the dry weight of plant per relative tiller appearance rates(DW/RTAR) was 0.895(p<0.001), respectively. 4. Between the winter hardiness index(W1) and field survival rate(SR) showed highly significant positive correlation(p<0.001). And, the dry weight of plant per relative tiller appearance rates(DW/RTAR) showed highly significant positive correlation(p<0.001) with the dry weight of a tiller(WT) and the dry weight of heading tillers(HDW). 5. The varieties were classified into 2 groups by winter hardiness index(W1). The 13 varieties of Hallmark. lna, Rancho, Amba, Filippa, Sparta, Hokuto, Kitamidori, Okamidori, Wasemidori, Shinyo, Potomac and Summer-green belong to the group of W1)100, and 4 varieties of Able, Juno, Napier and Jesper belong to the group of WI(100, respectively. 6. And, also classified into 2 groups by the dry weight of plant per relative tiller appearance rates (DWIRTAR). The 4 varieties of Amba, Okamidori, Wasemidori and Summer-green belong to the group of DW1RTAR)l.O and 13 varieties of Able, Hallmark, Ina, Juno, Napier, Rancho, Filippa. Jesper, Sparta, Hokuto, Kitamidori, Shinyo and Potomac belong to the group of DW/RTAR(1.0, respectively. The variety with DW/RTAR)I.O is belong to the group of high potential winter hardiness, and also obtained a high values over the 100 of winter hardiness index(W1). 7. The dry weight of plant per relative tiller appearance rates(DW/RTAR) may be a very useful ecological character to evaluate the potential winter hardiness of orchardgrass varieties grown under mountainous area of Taekwalyon(altitudinal ranges about 800m).

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.10-39
• /
• 1988

This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.53-63
• /
• 1994

In order to investigate the effects of application rates of mineral N and cattle slurry on the dry matter yield of Reed canarygrass grown in different cutting frequency, was was cernpared for the efficiency of N utilization. Annual rates of mineral N and cattle slurry N of 0 (control), 90kg, 180kg, 270kg and 360kg/ha in 3 cuttings, 0, 120kg, 240kg, 360kg and 480kg/ha in 4 cuttings, and 0, 150kg, 300kg, 450kg and 600kg/ha were applied as urea and cattle slurry in 5 cuttings, respectively. The results were summarized as follows: 1. The annual dry matter yields were increased with application rates of mineral N and cattle slurry. The annual dry matter yields of mineral N obtained were 14.4 ton/ha(ranged from 10.46 ton to 16.91 ton/ha) in 3 cuttings, 13.88 ton/ha(ranged from 9.91 ton to 16.53 ton/ha) in 4 cuttings and 15.98 ton/ha(ranged from 12.0 ton to 18.25 ton/ha) in 5 cuttings. The annual dry matter yields of cattle slurry obtained were 12.14ton/ha(ranged from 8.92 ton to 11.79ton/ha) in 3 cuttings, 10.81ton/ha(ranged from 8.92 to 11.79 ton/ha) in 4 cuttings and 12.98ton/ha(ranged from 10.68 ton to 14.85ton/ha) in 5 cuttings. 2. Relative dry matter yield of cattle slurry as compared to mineral N were 84.3%, 77.9% and 81.2% in 3, 4 and 5 cuttings. 3. Average increase in dry matter production(kgDM/kgN) tended to decrease with application rates of mineral N and cattle slurry, and higher cutting frequencies. Average increase in dry matter production obtained were higher values at rates of 30kg/ha/cut in both of mineral N and cattle slurry. Average increase in dry matter production to mineral N were 23.9kg, 18.8kg and 15.2kgin 3, 4 and 5 cuttings, respectively. 4. Average increase in total nitrogen yield(kgTN/kgN) to mineral N obtained were 0.46kg at rates of 60kg/ha/cut in 3 cuttings, and 0.45kg and 0.40kg at rates of 30kg/ha/cut in 4 and 5 cuttings. 5. Average increase in dry matter production(kgDM/kgN) to cattle slurry obtained were 13.7kg and 19.5kg at rates of 30kg/ha/cut in 3 and 4 cuttings, and 9.7kg at rates of 60kg/ha/cut in 5 cuttings. 6. Average increase in total nitrogen yield(kgTN/kgN) to cattle slurry was not concern to the rates of application. Average increase in total nitrogen yield to cattle slurry obtained were 0.11kg, 0.20kg and 0.21kg in 3, 4 and 5 cuttings. 7. Relative average increase in dry matter production of cattle slurry as compared to mineral N were 33.1%, 52.1% and 50.0% in 3, 4 and 5 cuttings. Relative average increase in total nitrogen yield of cattle slurry as compared to mineral N were 28.9%, 51.3% and 55.3% in 3, 4 and 5 cuttings.