• 대한스포츠의학회지
• /
• 제36권4호
• /
• pp.180-188
• /
• 2018

Purpose: The purpose of this study is to identify bilateral differences of physeal closure of the lateral compartment of the elbow in osteochondritis dissecans (OCD) and related factors with premature physeal closure. Methods: Initial radiographs of the bilateral elbows in 40 baseball players with OCD (group I) were reviewed for the status of physeal closure of the lateral compartment; capitellum, radial head, lateral epicondyle. Forty baseball players with medial epicondylar apophysitis (group II) were enrolled as a control. Relative status of physeal closure of dominant elbow was defined as early, same, and delayed. Bilateral differences of the status of physeal closure were analyzed between groups, and according to the radiographic stages, extent of the lesions and demographic factors in group I. Results: Significant early physeal closures of dominant elbows were identified in group I in capitellum (group I, 55%; group II, 3%), radial head (group I, 53%; group II, 3%), and lateral epicondyle (group I 37%; group II, 5%). In group I, advanced stage and extended lesion showed early lateral compartment physeal closure especially in capitellum and radial head, and players with longer career length and limitation of motion showed early closure. Conclusion: Over the half of the adolescent baseball players with OCD demonstrated early radiocapitellar physeal closures of dominant elbow in initial presentation. Because premature physeal closure contributes to the development of arthritis without appropriate radiocapitellar remodeling, early detection of OCD is essential for prevention of arthritis and successful conservative management.

• 천문학회지
• /
• 제53권6호
• /
• pp.161-168
• /
• 2020

We report the discovery of a giant exoplanet in the microlensing event OGLE-2017-BLG-1049, with a planet-host star mass ratio of q = 9.53 ± 0.39 × 10-3 and a caustic crossing feature in Korea Microlensing Telescope Network (KMTNet) observations. The caustic crossing feature yields an angular Einstein radius of θE = 0.52 ± 0.11 mas. However, the microlens parallax is not measured because the time scale of the event, tE ≃ 29 days, is too short. Thus, we perform a Bayesian analysis to estimate physical quantities of the lens system. We find that the lens system has a star with mass Mh = 0.55+0.36-0.29 M⊙ hosting a giant planet with Mp = 5.53+3.62-2.87 MJup, at a distance of DL = 5.67+1.11-1.52 kpc. The projected star-planet separation is a⊥ = 3.92+1.10-1.32 au. This means that the planet is located beyond the snow line of the host. The relative lens-source proper motion is μrel ~ 7 mas yr-1, thus the lens and source will be separated from each other within 10 years. After this, it will be possible to measure the flux of the host star with 30 meter class telescopes and to determine its mass.

• 항공우주시스템공학회지
• /
• 제16권4호
• /
• pp.53-59
• /
• 2022

액체 로켓 엔진의 연소기, 터보펌프, 가스발생기, 밸브 등 주요 구성품 조립 부위에는 고압의 고온 가스와 극저온 유체의 기밀을 위해 스태틱 실이 사용된다. 스태틱 실은 조립 부위의 상대적 움직임이 없는 기밀 부위에 적용되는데, 극저온 및 고온 환경에서의 열팽창과 수축은 조립부에서 원치 않는 누설을 야기할 수 있기에 효과적인 스태틱 실 설계가 필수적이다. 조립성 개선을 위하여 비정렬 조립이 가능한 구면 플랜지가 체결부에 사용되는데, 구면 플랜지의 회전이 가능하도록 스태틱 실 역시 기능이 추가된 다. 본 연구에서는 스태틱 실 적용 주요 부위의 모사 플랜지 시험기를 제작하여 구조 해석과 함께 기밀시험을 수행하여 설계된 스태틱 실의 구조 건전성을 확인하였다.

• 한국해양공학회지
• /
• 제36권5호
• /
• pp.340-352
• /
• 2022

This article presents a modeling method for the uncorrelated measurement error of the ultra-short baseline (USBL) acoustic positioning system for aiding navigation of underwater vehicles. The Mahalanobis distance (MD) and principal component analysis are applied to decorrelate the errors of USBL measurements, which are correlated in the x- and y-directions and vary according to the relative direction and distance between a reference station and the underwater vehicles. The proposed method can decouple the radial-direction error and angular direction error from each USBL measurement, where the former and latter are independent and dependent, respectively, of the distance between the reference station and the vehicle. With the decorrelation of the USBL errors along the trajectory of the vehicles in every time step, the proposed method can reduce the threshold of the outlier decision level. To demonstrate the effectiveness of the proposed method, simulation studies were performed with motion data obtained from a field experiment involving an autonomous underwater vehicle and USBL signals generated numerically by matching the specifications of a specific USBL with the data of a global positioning system. The simulations indicated that the navigation system is more robust in rejecting outliers of the USBL measurements than conventional ones. In addition, it was shown that the erroneous estimation of the navigation system after a long USBL blackout can converge to the true states using the MD of the USBL measurements. The navigation systems using the uncorrelated error model of the USBL, therefore, can effectively eliminate USBL outliers without loss of uncontaminated signals.

• 한국지진공학회논문집
• /
• 제27권5호
• /
• pp.193-202
• /
• 2023

In this paper, a dynamic centrifuge model test was conducted on a 24.8-meter-deep excavation consisting of a 20 m sand layer and 4.8 m bedrock, classified as S3 by Korean seismic design code KDS 17 10 00. A braced excavation wall supports the hole. From the results, the mechanism of seismically induced earth pressure was investigated, and their distribution and loading points were analyzed. During earthquake loadings, active seismic earth pressure decreases from the at-rest earth pressure since the backfill laterally expands at the movement of the wall toward the active direction. Yet, the passive seismic earth pressure increases from the at-rest earth pressure since the backfill pushes to the wall and laterally compresses at it, moving toward a passive direction and returning to the initial position. The seismic earth pressure distribution shows a half-diamond distribution in the dense sand and a uniform distribution in loose sand. The loading point of dynamic thrust corresponding with seismic earth pressure is at the center of the soil backfill. The dynamic thrust increased differently depending on the backfill's relative density and input motion type. Still, in general, the dynamic thrust increased rapidly when the maximum horizontal displacement of the wall exceeded 0.05 H%.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.49-58
• /
• 2007

침투그라우팅시 미세입자의 이동 메카니즘과 미세입자들의 간극 충진 후 강도증가 상태를 파악하기 위해 PFC3D를 이용한 수치해석을 수행하였다. 해석을 위하여 업스케일링 기법을 이용하였으며 연구를 통해 다음과 같은 사실들이 관찰되었다. 첫째, 토층 입자에 대한 그라우팅 미세 입자의 상대적 크기가 0.05배에서 0.25배로 증가하면서 입자의 이동이 제한을 받게 된다. 특히, 0.20배 또는 0.25배의 그라우팅 미세입자의 경우, 토층 입자들 간의 공극이 하나 또는 다수의 미세입자들에 의해 막히기 때문에 미세입자의 이동이 거의 없다. 또한 0.05배와 0.10배의 경우, 입자의 이동량이 거의 유사하므로 입자 크기가 감소되어도 그라우팅 효과의 증진은 한계가 있다. 둘째, 침투그라우팅 전과 후의 수치시료에 대한 물성 실험을 한 결과 점착력과 마찰계수가 증가함이 확인되었다.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.146-154
• /
• 1997

Ion implantation has been used successfully as a surface treatment technology to improve the wear. fatigue and corrosion resistances of materials. A modified surface layer by ion implantation is very thin(under 1 m), but it has different mechanical properties from the substrate. It has also different wear characteristics. Since wear is a dynamic phenomenon on interacting surfaces with relative motion, an effective method for investigtating the wear of a thin layer is the observation of wear process in microscopic detail using in-situ system. The change of wear properties produces the transition of wear mode. To know the microscopic wear mechanism of this thin layer, it is very important to clarify its microscopic wear mode. In this paper, using the SEM and AFM Rribosystems as in-situ system, the microscopic wear of Ti ion-implanted 1C-3Cr steel, a material for roller in the cold working process, was investigated in repeated sliding. The depth of wear groove and the speciffc wear amount were changed with transition of microscopic wear mode. The depth of wear groove with friction cycles in AFM tribosystem and specific wear amount of Ti ion-implanted 1C-3Cr steel were less about 2-3 times than those of non-implanted 1C-3Cr steel. The microscopic wear mechansim of Ti ion-implanted 1C-3Cr steel was also clarified. The microscopic wear property was quantitatively evaluated in terms of microscopic wear mode and specific wear amount.

• 한국식생활문화학회지
• /
• 제23권3호
• /
• pp.403-409
• /
• 2008

Recently, the desire for low body weight, which is an abnormal weight construct along with obesity, has become an evident and serious problem in teenagers. In Korea, the desire for low weight is not perceived as an important problem, but it is rapidly expanding relative to the physical changes and developmental issues teenagers experience. The social atmosphere presented through mass media is the key influencer for the increasing low weight occurrence in teenagers. Because thoughts about beauty have changed among people, and since there is apparent blind interest in slim body shape and appearance, already low-weight individuals are attempting to lose weight along with obese persons. Thus, we consider it necessary to guide teenagers toward having correct perceptions with regard to weight and their own body shape, and that a healthy and appropriate weight is beautiful. Therefore, for this study, we investigated body perception, abnormal weight, attitude toward weight control, and factors related to eating behavior among teenage girls, who are considered the at risk group for overt body weight control behavior. Based on this, we have attempted to set in motion a systematic and active nutrition education program that will allow us to increase body satisfaction by educating on nutritional issues related to development, and ultimately, implant healthy body shape perceptions.

• Wind and Structures
• /
• 제37권4호
• /
• pp.289-302
• /
• 2023

Insulating glass units (IGUs) have been widely used in buildings in recent years due to their superior thermal insulation performance. However, because of the panel reciprocating motion and fatigue deterioration of sealants under long-term wind loads, many IGUs have the problem of early failure of watertight properties in real usage. This study aimed to propose a statistical method for wind-induced deflection of IGU panels during the whole life service period, for further precise analysis of the accumulated fatigue damage at the sealed part of the edge bond. By the estimation of the wind occurrence regularity based on wind pressure return period, the events of each wind speed interval during the whole life were obtained for the IGUs at 50m height in Beijing, which are in good agreement with the measured data. Also, the wind-induced deflection analysis method of IGUs based on the formula of airspace coefficient was proposed and verified as an improvement of the original stiffness distribution method with the average relative error compared to the test being about 3% or less. Combining the two methods above, the deformation of the outer and inner panes under wind loads during 30 years was precisely calculated, and the deflection and stress state at selected locations were obtained finally. The results show that the compression displacement at the secondary sealant under the maximum wind pressure is close to 0.3mm (strain 2.5%), and the IGUs are in tens of thousands of times the low amplitude tensile-compression cycle and several times to dozens of times the relatively high amplitude tensile-compression cycle environment. The approach proposed in this paper provides a basis for subsequent studies on the durability of IGUs and the wind-resistant behaviors of curtain wall structures.

• 대한통합의학회지
• /
• 제12권3호
• /
• pp.143-153
• /
• 2024

Purpose : Forward head posture (FHP), characterized by the anterior positioning of the head relative to the spine, is a common postural deviation that can lead to neck pain, reduced mobility, and muscle imbalances. Recently, high-frequency deep heat therapy (HFDT) has been gaining attention for the intervention of FHP. This research aims to investigate the efficacy of HFDT in comparison to instrument assisted soft-tissue mobilization (IASTM) for treating FHP among 30 young adults. Methods : Participants were randomly assigned to either the HFDT or IASTM group. The study focused on examining changes in neck joint mobility, pain thresholds, rounded shoulder distance, lower trapezius muscle strength, and neck dysfunction. Measurements were taken before and after the interventions. Paired t-tests were used for within-group analyses, and independent t-tests were employed for between-group comparisons. The statistical significance level α was set to .05. Results : Statistically significant improvements were observed across all measured parameters in both groups (p<.05). The HFDT group showed significantly greater enhancements in neck joint mobility, pain thresholds, rounded shoulder distance, lower trapezius muscle strength, and neck dysfunction parameters. Specifically, HFDT was more effective than IASTM in improving neck joint mobility, right upper trapezius pain threshold, left rounded shoulder distance, and right lower trapezius strength. The only exceptions were neck flexion range of motion, left upper trapezius pain threshold, right rounded shoulder distance, and left lower trapezius strength, where no significant differences were found between the groups. Conclusion : The findings suggest that HFDT, by combining the benefits of high-frequency therapy and manual therapy, effectively alleviates upper trapezius muscle pain and tension, enhances neck mobility, and strengthens lower trapezius muscles. Thus, HFDT could be considered a valuable intervention for clinicians aiming to address FHP and associated musculoskeletal problems.