• Title/Summary/Keyword: Relative increasing rate

Search Result 370, Processing Time 0.028 seconds

Photocatalytic Decomposition of Gaseous Ozone over $TiO_2$Thin Film

  • Cho, Ki-Chul;Hwang, Kyung-Chul;Yeo, Hyun-Gu;Taizo Sano;Koji Takeuchi;Sadao Matsuzawa
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.19 no.E3
    • /
    • pp.121-127
    • /
    • 2003
  • The characteristics of heterogeneous photocatalytic decomposition were investigated at low concentration level of $O_3$on TiO$_2$for various operating parameters such as: loaded catalyst weight (0∼4 mg/$\textrm{cm}^2$), initial concentration of $O_3$(0.06∼10.0 ppm), gas flow rate (1.0 ∼ 2.5ι/min), and relative humidity (0∼80%). This study was conducted using a flow-type reactor at room temperature. Three kinds of pure TiO$_2$(P25, ST -01, and E- 23) were employed as photocatalyts. It was found that $O_3$removal ratio was identical, regardless of the loaded TiO$_2$weight in the range from 0.5 to 4.0 mg/$\textrm{cm}^2$. It was also found that higher initial ozone concentration results in greater oxidation rate of ozone and experimental data show kinetically a good agreement with Langmur-Hinshelwood kinetic model. We also observed that the removal ratio of $O_3$increases linearly with the increasing flow rate and also with the increasing relative humidity for each catalyst.

Influence of Relative Air Humidity on the Color Change of Fish Meat during Drying (어육건조중 변색에 미치는 상대습도의 영향)

  • CHOI Soo Il;KIM Byeong Sam;HAN Bong Ho
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.16 no.4
    • /
    • pp.349-354
    • /
    • 1983
  • A study on the color changes of fish meat during drying was conducted using fishes with different lipid contents, such as Alaska pollack as lean fish, conger eel as white fleshed fatty fish, and sardine as dark fleshed fatty fish. The fish meat was dried in a forced air dryer for 20 hours at 40, 55 and $70^{\circ}C$, The air velocity was 0.4 m/sec and the relative humidity of air was controlled to a constant value in the range of 10 to $50\%$. The color changes were evaluated with the brown color densities developed by lipid oxidation and Maillard reaction. The predominant reaction for the brown color developed during drying was lipid oxidation, The more the lipid content of fish and the higher the drying temperature were, the more violent the oxidative reaction of Lipid was. The rate of lipid oxidation during drying at 40 and $55^{\circ}C$ was affected by the relative humidity of air and was the slowest around $30\%$. But no remarkable influence of relative humidity on the rate of lipid oxidation could be confirmed during drying at $70^{\circ}C$. It seemed that the rate of lipid oxidation at higher temperature was more sensitive to the temperature than the relative humidity of air. Maillard reaction showed not so significant influence on the color changes of fish meat during drying. The rate of reaction was increased with increasing relative humidity of air in the range of 10 to $50\%$.

  • PDF

Mediastinal Lymph Node Dissection in Gastroesophageal Junction Adenocarcinoma

  • Jin-Jo Kim
    • Journal of Gastric Cancer
    • /
    • v.23 no.1
    • /
    • pp.171-181
    • /
    • 2023
  • Currently, the prevalence of gastroesophageal junction adenocarcinoma (GEJAC) is increasing in both Asian and Western countries, although the increasing rate in Asian countries is much slower than in Western countries. With these current trends, concerns regarding the surgical treatment method are also increasing among gastrointestinal surgeons. However, the surgical treatment for GEJAC has been a controversial issue for a long time due to the relative scarcity of this tumor and its characteristics from its borderline location. Recently, a large-scale prospective study of this tumor has been conducted in Japan, and the results are now available. The results of this study will be helpful for understanding this tumor. In this article, the pattern of lymph node metastasis of GEJAC is reviewed, and the extent and method of lymph node dissection for this tumor are discussed and proposed based on the review.

Forest Stratification Effect of Air Temperature and Humidity in the Green Space (수림의 계층구조가 녹지내의 기온 및 습도에 미치는 영향)

  • Yoon, Yong-Han
    • Korean Journal of Environmental Biology
    • /
    • v.21 no.2
    • /
    • pp.120-125
    • /
    • 2003
  • For this study grasp coverage condition and forest stratification to various green space, observed air temperature and relative humidity. With this data, coverage condition and air temperature, relative humidity distribution, analyzed relationship of forest rate and air temperature or relative humidity, tree numbers and green volume and humidity by revolution analysis. In this result, higher none is formed artificiality and barren area, lower zone did fores and water area. Relative humidity have corresponding type of air temperature distribution. lower Tone was higher humidity. Different of Idlest type or water area, surround of forest showed relatively higher humidity. Increasing tree numbers or green volume effect higher humidity and this efficiency order of an arbor, subarbor, shrub.

Growth and Photosynthetic Responses of One C3 and Two C4 Chenopodiaceae Plants to Three CO2 Concentration Conditions

  • Ishikawa, Shin-Ichi
    • Journal of Ecology and Environment
    • /
    • v.31 no.4
    • /
    • pp.261-267
    • /
    • 2008
  • Growth and photosynthetic responses of one $C_3$ and two $C_4$ plants in the family Chenopodiaceae in three $CO_2$ concentration $([CO_2])$ conditions-low (about $243{\mu}mol\;mol^{-1}$, LC), present (about 378, PC), and high (about 465, HC)-were investigated in open top chambers. The relative growth rate (RGR) and net assimilation rate in the $C_3$ plant, Chenopodium album, increased with increasing $[CO_2]$, though the RGR was not enhanced significantly in the HC condition. The leaf area ratio and leaf weight ratio of the $C_3$ plant drastically decreased with increasing $[CO_2]$, suggesting that the $C_3$ plant invests more biomass to leaves in lower $[CO_2]$ conditions. The two $C_4$ plants, Atriplex glauca and A. lentiformis, showed relatively small changes in those growth parameters. These photosynthetic-pathway-dependent responses suggest that growth patterns of $C_3$ and $C_4$ plants have been altered by past increases in atmospheric $[CO_2]$ but that there will be relatively little further alteration in the future high-$CO_2$ world.

A Study on the Diurnal Change of Pinus rigida Pollen Deposition in Mt. Kwan-ak (공중에 비산하는 Pinus rigida 화분의 일변화량)

  • Chang, Nam-Kee;Jae-Geun Kim
    • The Korean Journal of Ecology
    • /
    • v.11 no.4
    • /
    • pp.193-200
    • /
    • 1988
  • The amount of Pinus rigida pollen deposition was hourly measured by Durhan's pollen trap in Seoul National University during May 9∼16 o'clock and 9∼15, 1988. The peak times or pollen deposition were 9∼10 o'clock and 16∼17 o'clock. The correlation coefficients between pollen deposition and mean temperature, relative humidity, and wind speed were 0.625, -0.655 and 0.418 respectively, It is thought that pollen maturation rate is correlated with mean temperature and the pollen deposition with increasing wind speed.

  • PDF

The Mixing Characteristics of Melt during the Injection of Gas into a Ladle through an Immersed Lance (침적 Lance를 이용한 가스 injection시 ladle내 액체의 교반특성 연구)

  • 박현서
    • Resources Recycling
    • /
    • v.11 no.3
    • /
    • pp.17-24
    • /
    • 2002
  • There has been an increasing demand over the years for steels with lower[s] content. For the purpose of improving the efficiency of desulphrization in the powder injection process of ladle, experimental studies were carried out by using cold model to optimize the lance configuration, gas flow rate, immersion depth of lance nozzle, position of lance nozzle relative to the ladle and the effect with slag, etc. As the results of this study, it was made clear that 2-hole nozzle lance (C, E type) placed in an asymmetric position gives the shortest mixing times.

Database Program for Managing Management Resources: General Contractor's Perspectives

  • Yong-Woo Kim;Sungwon Shin
    • International conference on construction engineering and project management
    • /
    • 2009.05a
    • /
    • pp.1100-1106
    • /
    • 2009
  • General contractors' overhead costs are increasing relative to direct costs. However, it is difficult to apply the traditional activity-based costing directly to the construction site overhead costing because the resource consumption rate per each activity is varied depending on the attributes of activities. The research develops a methodology of hybrid cost allocation system when resources are assigned to cost objects unlike the traditional activity-based costing. The study also develops a database program and demonstrates how it can be applied to the construction projects using a case study.

  • PDF

A Study on the Liquid Phase Sintering of Tungsten-Nickel-Manganese alloy (텅스텐-니켈-망간 합금의 액상소결에 관한연구)

  • Hong, Mun-Hui;Lee, Seong;Roh, Jun-Ung;Paik, Un-Hyeong
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 1995.11a
    • /
    • pp.25-25
    • /
    • 1995
  • Liquid phase sintering of 90W-6Ni-4Mn alloy has been investigated as functions of sintering atmosphere, heating rate, and reduction temperature. The present work accounts for the thermodynamic oxidatiodreduction reactions of constituent powders of W, Ni and Mn. By discounting these reactions, the previous investigations would obtain only the alloy with large pores and the lowered relative sintered density, by the liquid phase sintering under a dry hydrogen atmosphere. the sintering cycle consisted of a rapid heating to reduction temperatures under high purity nitrogen atmosphere, and holding for 4 hours and sintering at $1260^{\circ}C$ for 1 hour under a dry hydrogen gas. The relative density of the sintered alloy increased with increasing heating rate. As the reduction temperature increased, the relative density increased to the lm theotical density at the duction temture above $1150^{\circ}C$. The mimsturcatre of sintered alloys has been analysed by a scanning election microscope. The sintered density was compared with those obtained from the other investigators. It was found that the reduction $1150^{\circ}C$ results in the lowered densification of 90W-6Ni-4Mn alloy. This is caused by the fact that reducing reactions of W and Ni oxides contained in W an Ni powders concomitantly leads to oxidizing reaction of Mn powder the oxidized Mn is hardly reduced at sintering temperature and thereby remains large pores in the alloy. It is concluded that the W-Ni-Mn alloy with full density can be obtained by the precise control of atmosphere, heating rate, and sintering temperature.

  • PDF

A Study on the Mechanical Compaction of Pervious Materials (투수성 성토재료의 기계다짐에 관한 연구)

  • 윤충섭
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.23 no.3
    • /
    • pp.65-77
    • /
    • 1981
  • The Compaction of fill dam is very important for increasing of the safty of dam. Vibration roller is used for the compaction of pervious materials such as sand and gravel. The principal objects of this study are to give a comstruction criteria of vibration roller and to find out the relationship between dry density and permeabity of pervious soil after compaction. The results in this study are summerized as follows. 1.The relationship between maximum dry density (Υdmax) and optimum moisture content(Wo) of modified compaction test is Υdmax=2. 74-0. 064w0 2.The maximum dry density decrease with increasing fine particle(n) and the relative formular is n==ae-brdmax 3.The maximum dry density is influenced more by passing rate of number 200 sieve than 4 sieve. 4.The coefficient of permeability are similar when the degrees of compaction are equal even though the spreading thickness of soil are different. 5.The coefficient of permeability(K)is greatly influence by fine particle passing number 200 sieve, and those relationship is inversely proportionate. 6.The K values of pervious soil are from 10-0 cm/sec to 10-4 cm/sec when degree of compaction by a modified method is from 90 to 95percent. 7.The coarser material is little influenced on the permeability with different density. 8.The increasing rate of permeability with decreasing degree of compaction is more influened by fine pacticle than number 200 sieve. When degree of compaction decrease from 100 percent to 90 percent the K values of SM and GM increase about 20 times but GW increase 6 times only. 9.The effect of compaction by vibration roller is greatly influenced by 6 passes and the increasing rate of the effect is decraased at 8 passes. 10. In order to get the degree of compaction of 95 percent or more, 6 to 8 passes of roller are generall required with 30 cm thickeness of soil for 4.5 ton to 6.5 ton vibration roller and 7 to 8 passes is required with 50cm thickness for 8 to 12 ton roller.

  • PDF