• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.79-85
• /
• 2003

This study was intended to estimate Hp(10) recommended by the ICRU using the $CaSO_4:Dy,P$ element developed in the KAERI. For the estimation of Hp(10), TL response should be compensated properly through the energy range using filter materials since $CaSO_4:Dy,P$ is of severe photon energy dependent response. Various experiments and computations using Monte Carlo Code were carried out for designing filter satisfying the performance requirements of the ISO related to TL dosimeter. Under the completed filter, the relative response of $CaSO_4:Dy,P$ showed $0.75{\sim}1.0$ for photons in the range of $20{\sim}662keV$. Especially it was possible to reduce the thickness of front filter and simplify the filter combination with rear filter of larger diameter and to considerably improve angular dependence by introducing taper to the filler.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.513-518
• /
• 2022

Electron beam quality assurance (QA) should be done regularly for accurate radiation therapy. However, QA tools used in clinical practice are designed mainly for X-rays. So, a dosimeter for electron beam QA is required. Therefore, in this study, the electron beam detection performance was measured by using a thorium bromide material as an electron beam sensor. In addition, it was evaluated whether it could be applied with an electron beam QA dosimeter. Reproducibility, linearity, and dose rate dependence were evaluated at 6 MeV and 9 MeV energies. As a result of reproducibility, it showed a maximum output change of 0.92% at 6 MeV and 1.15% at 9 MeV. The linearity result evaluation and determination coefficient were presented as 0.9998. As a result of dose rate dependence evaluation, relative standard deviation 0.51% at 6 MeV and relative standard deviation 1.07% at 9 MeV were presented. The manufactured TlBr sensor shows the ability to detect radiation that meets the criteria for evaluation of reproducibility, linearity, and dose rate dependence. These results mean that the TlBr dosimeter is applicable as an electron beam QA dosimeter.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.2
• /
• pp.103-113
• /
• 2012

The ButterStar Observatory at the Dongducheon High School has been working for photographic observations of the Sun since October 16, 2002. In this study, we observed the Sun at the ButterStar observatory for 3,364 days from October 16, 2002 to December 31, 2011, and analyzed the photographic sunspot data obtained in 1,965 days. The correction factor $K_b$ for the entire observing period is 0.9519, which is calculated using the linear least square method to the relationship between the daily sunspot number, $R_B$, and the daily international relative sunspot number, $R_i$. The yearly correction factor calculated for each year varies slightly from year to year and shows a trend to change along the solar cycle. The correction factor is larger during the solar maxima and smaller during the solar minima in general. This implies that the discrepancy between a relative sunspot number, R, and the daily international relative sunspot number, $R_i$, can be reduced by using a yearly correction factor. From 2002 to 2008 in solar cycle 23, 35.4% and 64.6% of sunspot groups and 35.1% and 64.9% of isolated sunspots in average occurred in the northern hemisphere and in the southern hemisphere, respectively, and from 2008 to 2011 in solar cycle 24, 61.3% and 38.7% of sunspot groups and 65.0% and 35.0% of isolated sunspots were observed, respectively. This result shows that the occurrence frequency for each type of sunspot group changes along the solar cycle development, which can be interpreted as the emerging and decaying process of sunspot groups is different depending on the phase of solar cycle. Therefore, it is considered that a following study would contribute to the efforts to understand the dependence of the dynamo mechanism on the phase of solar cycle.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.71-74
• /
• 2002

The apparent barrier height for charge transfer through an interfacial water layer between a Pt/Ir tip and a gold surface has been measured using STM technique. The average thickness of the interfacial water layer inside an STM junction was controlled by the amount of moisture. A thin water layer on the surface was formed when relative humidity was in the range of 10 to 80%. In such a case, electron tunneling through the thin water layer became the majority of charge transfers. The value of the barrier height for the electron tunneling was determined to be 0.95 eV from the current vs. distance curve, which was independent of the tip-sample distance. On the other hand, the apparent barrier height for charge transfer showed a dependence on tip-sample distance in the bias range of 0.1-0.5 V at a relative humidity of approximately 96%. The non-exponentiality for current decay under these conditions has been explained in terms of electron tunneling and electrochemical processes. In addition, the plateau current was observed at a large tip-sample distance, which was caused by electrochemical processes and was dependent on the applied voltage.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.291-302
• /
• 2004

In this paper, load monitoring technologies using U-shape Magnetoelastic (EM or ME) sensors have been exploited systemically for the first time. The steel rod to be tested is the Japan 7 mm piano steel rod. The load dependence of the magnetic properties of the piano steel rod was manifested. Two experimental designs of U-shape magnetoelastic sensors were introduced, one with double pick-up concentric coils wound on the rod to be tested, the other with pick-up coil on one yoke foot. The former design is used to derive the correlation of the relative permeability with elastic tension, while the latter is aimed to reflect the stress induced magnetic flux variation along the magnetic circuit. Magnetostatic simulations provide interpretations for the yoke foot sensing technology. Tests with double pick-up coils indicate that under proper working points (primary voltages), the relative permeability varies linearly with the axial load for the Japan 7 mm piano steel rod. Tests with pick-up coil on the yoke foot show that the integrated sensing voltage changes quadratically with the load, and error is more acceptable when the working point is high enough.

• Asian review of World Histories
• /
• v.2 no.2
• /
• pp.147-167
• /
• 2014

The urban modernity that became an irresistible model for elites in Asia in the decades before and after 1900 was far from being gender-neutral. It represented an exceptional peak of patriarchy in its exclusion of respectable middle class women from the work force, from ownership and control of property and from politics. Marriage was indissoluble and the wife's role in the male-headed nuclear family was to care for and educate the abundant children she produced. Puritan religious values underlined the perils for women of falling outside this pattern of dependence on the male. Though upheld as modern and civilized, this ideal was in particularly striking contrast with the pre-colonial Southeast Asian pattern of economic autonomy and balance between women and men, and the relative ease of female-initiated divorce. Although attractive to many western-educated Southeast Asian men, including religious reformers determined to 'save' and domesticate women, urban respectability of this type was a poor fit for women accustomed to dominant roles in commerce and marketing, and at least equal ones in production. Southeast Asian relative failure in the high colonial era to adapt to the modern market economy may also have a gendered explanation. We should not be surprised that patriarchy and puritanism became more important in Southeast Asia as it urbanized in the late 20th Century, since this was echoing the European experience a century earlier. The question remains how far Southeast Asia could retain its relatively balanced gender pattern in face of its eventual rapid urbanization and commercial development.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2015

We investigate the propagation characteristics of a pulse laser in a time-of-flight laser range finder (TOF-LRF) system with variations in atmospheric conditions, such as temperature, pressure, relative humidity, and the concentration of $CO_2$. The measurement error of distance related with the group velocity change in the TOF-LRF system is analyzed by considering the refractive index of the standard atmosphere with variations in atmospheric conditions. The dependence of the pulse width broadening induced by chromatic dispersion of the standard atmosphere on the operating wavelength and the initial pulse width of the light sources is discussed. The transmission of air with variations in the relative humidity or the concentration of $CO_2$ is analyzed by using different values of absorption coefficients depending on the operation wavelength of the light source in the TOF-LRF system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.8
• /
• pp.906-917
• /
• 2011

This study identified the present state of store and selection criteria of supplier from the regional fashion buyer point of view and examined the effects of the factors of relative impact between buyer and supplier on the relational bond. The interviews and questionnaires were administered to the owners or the sellers of 85 fashion retail stores in Gwangju. For analysis of data, frequency, means, factor analysis, Cronbach's ${\alpha}$ and regression analysis were applied. The results were as follows. First, in the results of examining the actual conditions of store managers for fashion buyers, fashion buyers complained about lengthy travelling and time consumption inconvenience. They also reported decrease in margin and monthly mean sales over last year. Second, the most important selection the criteria for the supplier were product power, followed by a convenient store layout. Finally, higher quality communication, more compromises, and higher dependence were affected with higher satisfaction, trust, and commitment in suppliers; conversely, the trust and commitment of the buyers decreased relative to the increased power of the suppliers.

• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.124-127
• /
• 2016

Humidity calibration for a temperature-stable quartz oscillator (TSQO) was investigated to exclude the influences of relative humidity on the TSQO output in order to use the corresponding devices outdoors. The TSQO output is a voltage that is inversely proportional to the electric impedance of the quartz oscillator, which depends on the viscosity and density of the measured gas. The TSQO output was humidity calibrated using its humidity dependence, which was obtained by varying the relative humidity (RH) from 0 to 100 RH% while other conditions were kept constant. The humidity dependencies of the TSQO output were fit by a linear function. Subtracting the change in the TSQO output induced by the change in humidity, calculated with the function from the experimentally measured TSQO output for a range of 0-100RH%, eliminated the influence of humidity on the TSQO output. The humidity calibration succeeded in reducing the fluctuations of the TSQO output from 0.4-3% to 0.1-0.3% of the average values for a range of 0-100RH%, at constant temperatures. The necessary stability of the TSQO output for application in hydrogen sensors was below one-third of the change observed for a hydrogen leakage of 1 vol.% hydrogen concentration, corresponding to 0.33% of the change in each background. Therefore, the results in this study indicate that the present humidity calibration effectively suppresses the influence of humidity, for the TSQO output for use as an outdoor hydrogen sensor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.681-685
• /
• 1992

Low molecular weight RNA(LMW RNA : 5S rRNA and tRNAs, <150 nucleotides) profiles of several bacteriocin production lactic acid bacteria from pig meats and reference lactic acid bacteria were generated on 10% denaturing polyacrylamide gel electrophoresis. Data evaluation including three molecular weight markers enabled the calculation of relative nucleotide units(RNU) for every band. Gels profiles and RNU evaluations were effective for identification of lactic acid bacteria species. LMW RNA profiles of lactic acid bacteria showed no variation in dependence on APT(All Purpose Tryptone Broth), TSB(Tryptic Soy Broth), MRS(Lactobacilli MRS Broth) different cultural medium.