• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.380-384
• /
• 2000

Effectiveness of information conveyance in reading is affected by several factors such as line length, letter size, line spacing arrangement as well as typeface itself. This study examined relative importance of these factors by asking people to read the texts that was constituted with non-square form letter and rank the preference of texts through conjoint analysis. In the case of reading time, justification was the most important factor, followed by leading, line spacing, letter width, line length, font size, font type in their order of importance. And in the case of preference decision, letter width was the most important factor, followed by font size, justification, line spacing, leading, line length, font type. The result will be useful in understanding how to consider human preference in the hangul typography.

• 산업기술연구
• /
• 제18권
• /
• pp.195-202
• /
• 1998

The effect of the number of nodes on the heat loss from a rectangular fin for a finite difference method is studied. There are two ways for selecting nodes for the upper half fin in this finite difference method. In the first place, all the ${\Delta}x$ are the same and all the ${\Delta}y$ are the same for the entire upper half fin. Incremental length of x (i.e. ${\Delta}x$) is divided by two near the fin tip while all the ${\Delta}y$ are the same for another way. The results show that 1) About 30 nodes are enough to obtain the satisfactory exact analysis (relative error < 5%) on the heat loss for a given range of Biot number in case of short fin (i.e. $L{\leq}2$). 2) Under usual circumstances (Bi<0.1), the relative error of heat loss between using 30 nodes and 90 nodes is within 4% for given range of non-dimensional fin length. 3) The relative error of the calculated heat loss (the number of node=90) as compared to the expected exact heat loss is less then 1.5% for Bi=0.1 and L=10 while that is over 13% for Bi=1.0 and L=10.

• 한국발생생물학회지:발생과생식
• /
• 제10권2호
• /
• pp.93-96
• /
• 2006

전어, Konosirus punctatus의 부화후부터 부화후 30일까지의 전장, 두장, 두고, 안경, 망막 두께 및 렌즈직경의 성장은 비례직선적이었다. 전장에 대한 두장 및 두고의 상대 성장, 두장에 대한 안경 및 렌즈직경의 상대 성장, 두고에 대한 안경 및 렌즈직경의 상대 성장, 그리고 망막 두께에 대한 안경, 렌즈직경, 두장, 두고의 상대 성장은 높은 상관계수를 보이는 상대성 장식을 보였다. 눈은 부화 후 9일에 완전히 형성되었으며 렌즈, 신경섬유층, 신경세포층, 내망상층, 내과립층, 외망상층, 외과립층, 외한계막, 간체와 추제층 및 상피층으로 구성되었다. 본 연구와 더불어 차후, 전어의 빛 민감성과 공간적 변화에 따른 망막 관련 연구가 필요하리라 사료된다.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1139-1150
• /
• 1997

A model for predicting the relative density and the compressive strength of open-cell ceramics with three-dimensional network structure was proposed through the interpretation of their macrostructure and fracture mechanics. The equation predicting the relative density was derived under the assumption that the open-cell structure was a periodic array of the tetrakaidecahedron unit cell consisting of cylindrical struts containing the internal hollow with the shape of a triangular prism. The model for compressive strength of open-cell ceramics with the hollow strut was also developed by modifying conventional model which based on fracture behavior of them subjected to the compressive stress. Both the relative density and the compressive strength were expressed in terms of the ratio of the strut diameter to the length together with the ratio of the hollow size to the strut diameter. The proposed model for the relative density and the compressive strength of the alumina-zirconia composite with open-cell structure were accorded well with the experimental values, whereas Gibson-Ashby and Zhang's model did not show such a good agreement.

• 한국수산과학회지
• /
• 제44권4호
• /
• pp.390-396
• /
• 2011

Southern rough shrimp Trachysalambria curvirostris is exploited mainly by small shrimp beam trawl in coastal regions of Korea. To determine the size selectivity of a shrimp beam trawl for this species, a series of comparative fishing experiments was conducted in the sea adjacent to Geoje Island off the southern cost of Korea in June and November, 2010, using codends with four different mesh sizes(14.2, 17.8, 25.5, and 35.3 mm). The extended Share Each Length's Catch Total(SELECT) analysis method, based on a multinomial distribution, was applied to the fishing data to obtain a master selection curve. The model with the estimated split parameters fit the catch data best. The master selection curve was estimated to be: s(R)=exp(15.183R-7.872)/[1+exp(15.183R-7.872)], where the relative carapace length, R, is the ratio of carapace length to mesh size. The relative carapace length for 50% retention was 0.518, and the selection range was 0.145. The results suggest that codends with a larger mesh size allow more small-sized shrimps to escape.

• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1583-1590
• /
• 2015

The aim of this study was to examine the morphological responses of Hosta longipes, an ornamental plants for heavy metal contaminated soils in urban landscaping, to heavy metals Cd, Pb, and Zn. Plants were grown in artificial soil amended with Cd, Pb, and Zn at concentation of 0, 100, 250, and 500 mg/kg. Plant height, leaf length, leaf width, total leaf number, deaf leaf number, new leaf number, chlorophyll contents, and ornamental value were monitored from May to August. At 4 months after planting, the survival and morphological responses of H. longipes grown in soil amended with Cd at concentrations ${\geq}100mg/kg$ were severely affected compared to those grown in the control soil. Relative leaf length rate and relative leaf width rate were significantly decreased when the concentration of Pb was increased. Total leaf number, chlorophyll contents, and ornamental value were the lowest value in plants grown in soil amended with Pb at level of 500 mg/kg. Relative leaf length rate and relative leaf width rate, total leaf number, dead leaf number, new leaf number, and ornamental values had a tendency of decrease when plants were grown in soils amended with Zn. However, no significant difference was found among treatments except for plants were grown in soils amended with 500 mg/kg Zn. Therefore, Hosta longipes might be useful for phytoremediation of Zn contaminated sites as herbaceous ornamental plants.

• Geomechanics and Engineering
• /
• 제29권1호
• /
• pp.25-40
• /
• 2022

In this study, 3D coupled-consolidation numerical parametric study was conducted to predict the deformation mechanism of a 20 storey building sitting on (4×4) piled raft (with length of piles, L_p=30 m) to adjacent 6 m diameter (D) tunnelling in stiff clay. The influences of different tunnel locations relative to piles (i.e., z_t/L_p) were investigated in this parametric study. In first case, the tunnel was excavated near the pile shafts with depth of tunnel axis (z_t) of 9 m (i.e., z_t/L_p). In second and third cases, tunnels were driven at z_t of 30 m and 42 m (i.e., z_t/L_p = 1.0 and 1.4), respectively. An advanced hypoplastic clay model (which is capable of taking small-strain stiffness in account) was adopted to capture soil behaviour. The computed results revealed that tunnelling activity adjacent to a building resting on piled raft caused significant settlement, differential settlement, lateral deflection, angular distortion in the building. In addition, substantial bending moment, shear forces and changes in axial load distribution along pile length were induced. The findings from the parametric study revealed that the building and pile responses significantly influenced by tunnel location relative to pile.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.300-305
• /
• 2000

We have investigated the dielectric and electrical characteristics of palmitic acid(PA) stearic acid(SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one(methylene group or alkyl chain length). The fatty acid systems were used as LB films and the status of the deposited films was confirmed by evaluating the transfer ratio the UV absorption and the capacitance. The dielectric characteristics such as the frequency-capacitance characteristics and the dielectric dispersion and absorption characteristics of PA SA and AA through-plane were measured. The relative dielectric constants of PA, SA and AA LB films were about 3.0~4.6, 2.7~3.0 and 2.4~3.0 respectively. That is the relative dielectric constants were decreased in proportion to the chain length of methylene group. Also the dielectric dispersion and absorption of each fatty acid LB films have arisen from spontaneous polarization of dipole polarization in the range of 10$^4$~10$^{5}$ ［Hz］. The conductivity of PA, SA and AA LB films obtained from I-V characteristics were about 9$\times$10$^{-14}$ , 3$\times$10$^{-14}$ and 5$\times$10$^{-15}$ ［S/cm］. respectively. These results have shown the insulating materials and could control the conductivity y changing the length of methylene group. Also we have confirmed that the barrier height of fatty acid systems were almost the same ones obtained from dielectric characteristics.

• 대한치과기공학회지
• /
• 제11권1호
• /
• pp.89-93
• /
• 1989

The purpose of this study was to evaluate the effect of sprue length and casting pressure on the relative castability of the base metal alloys, commonly used to make porcelain metal restoration. Samples of total 30 were constucted and devided into 6 groups according to three variables (low, medium, high). The total number of complety cast squares were counted, verified and recorded. The results of this 1. main effect of casting pressure was statistically significant.(P<0.05). 2. main effect of sprue length was not statistically significant.

• 한국유체기계학회 논문집
• /
• 제8권4호
• /
• pp.27-38
• /
• 2005

The present study investigated the effect of relative position of the blade on blade surface heat transfer. The experiments were conducted in a low speed wind tunnel with a stationary annular turbine cascade. The test section has a single turbine stage composed of sixteen guide vanes and blades. The chord length of the blade is 150 mm and the mean tip clearance of the blade is $2.5\%$ of the blade chord. The Reynolds number based on blade inlet velocity and chord length is $1.5{\times}105$ and mean turbulence intensity is about $3\%$. To investigate the effect of relative position of blade, the blade at six different positions in a pitch was examined. For the detailed mass transfer measurements, a naphthalene sublimation technique was used. In general, complex heat transfer characteristics are observed on the blade surface due to various flow characteristics, such as a laminar flow separation, relaminarization, flow acceleration, transition to turbulence and tip leakage vortices. The results show that the blade relative position affects those heat transfer characteristics because the distributions of incoming flow velocity and turbulence intensity are changed. Especially, the heat transfer pattern on the near-tip region is significantly affected by the relative position of the blade because the effect of tip leakage vortex is strongly dependent on the blade position. On the pressure side, the effect of blade position is not so significant as on the suction side surface although the position and the size of the separation bubble are changed.