• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.273-279
• /
• 2004

Recently, newly developed single high-intensity LED curing lights for composite resins are claimed to have a higher intensity than previous LED curing lights and to results in optimal properties and short curing time. The purpose of this study was to determine the curing effectiveness of the curing units and to evaluate the relationship between the degree of polymerization and distance from curing light tip end to resin surface. One composite resin was tested(Filtek Z250). Thin film specimens were cured with a LED curing unit(Elipar Freelight 2, 10s), Plasma Arc curing unit(Flipo, 6s), Halogen curing light(XL3000, 20s) at four curing light tip to the resin surface(0mm, 2mm, 4mm, 6mm). Degree of conversion of composite resins were determined by a Fourier Transform Infrared Spectrometer(FTIR). From the present study, the following results were obtained. 1. In all curing units, relative light intensity was significantly decreased according to the increase of distance of light tip to the resin surface(p<0.05). LED curing units showed a higher percentile decrease in intensity than other curing units. 2. In all curing units, degree of conversion was decreased as increase of the distance but no statistically significant difference(p>0.05) except between 4mm and 6mm(p<0.05). 3. When comparing degree of conversion of light curing units at each distance(0mm, 2mm, 4mm, 6mm), LED curing light had a higher degree of conversion than plasma arc and halogen curing lights at 0, 2, 4mm(p<0.05). At 6mm, there was a no significant difference among the curing units(p>0.05).

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.299-304
• /
• 2008

Lately, national hygiene & medical environment and its demand aspect have been rapidly changing, and market opening of hygiene and medical sector is accelerating. Due to the change in labor resulting from the wide range of change in industrial structure and the steady decrease in university applicants, most of colleges and universities have been strongly urged to establish hygiene medical manpower training courses or relative courses, which leaves the medical technician training courses in 4 year universities on the robust increase. Consequently, the medical technicians, graduating from 3 year colleges without bachelor's degree due to shortage of 20 credits for acquisition of degree, have had to compete with the graduates from 4 year universities and the bachelor's degree has been in continuous demand for the medical technicians of 3 year college. In the research for recognition of Credit Bank System prevalent across the colleges, enabling the systematic acquisition of bachelor's degree, 60.9% among the respondents are aware of Credit Bank System, and 46.9% are aware that Advanced Major Course is induced in the near future. Hence, there shall be active promotions of various programs allowing acquisition of bachelor's degree in the colleges. The social change in recognition of colleges by inducement of the two programs may authorize the college to have the scholastic attainments equivalent to the 4 year university, and the political initiative shall be deliberated across over the government and the academic world.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.103-119
• /
• 2021

Ports in Korea have been increasing in terms of volume while they have performed functions and roles such as industrial ports in promoting industries of their hinterlands as well as commercial ports supporting imports and exports. Nevertheless, specialization degree is different from port to port by cargo type and the changes in cargo volume. This study aims to analyze the structural changes and the degree of concentration and specialization by cargo type and port between 2001 and 2020. Top 10 ports were analyzed in terms of traffic volume by categorizing liquid, dry, general cargo and containers. HHI(Herfindahl-Hirschman Index), LQ(Location Coefficient), and shift-share analysis were employed in order to identify the degree of concentration, specialization and changes in cargo volume by port and cargo type. As a result of the analysis, the degree of port concentration and specialization for each cargo of 4 categories have maintained a high level, and no significant difference were found in fluctuations over the past 20 years. As a result of calculating the flucation of cargo volume through the shift-share analysis, the growth rate of liquid cargo was high in Yeosu Gwangyang Port, Pyeongtaek Dangjin Port in dry cargo, and Busan Port in general cargo and container ports. The result implies that it is not expected that the structural changes including degree of cargo concentration, specialization and relative fluctuation of cargo volume is significant in Korean ports in the future since the effects of economies of scale and clustering were achieved to the great degree.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.12-20
• /
• 2008

Radial and vertical variations of relative crystallinity and crystallite width of cellulose within stems of three softwoods (Pinus densiflora S. et Z., P. koraiensis S. et Z, P. rigida Mill.) grown in Korea were examined by an X-ray diffraction method. The mean of relative crystallinity was 61.7% in P. koraiensis, 60.6% in P. densiflora and 49.4% in P. rigida. The degree of crystallinity in earlywood and latewood increased with the age from pith to about 10~15 years, and then remained almost constant value. The relative crystallinitiy of latewood was slightly higher than that of earlywood. The relative crystallinity in P. densiflora was a little lower at the base of stem, but no significant difference by height was shown in P. koraiensis and P. rigida. The crystallite widths in the stems were 2.8 to 3.0 nm, but were not significantly different in earlywood and latewood by height. In conclusion, the relative crystallinity appeared to be a useful index for separating juvenile wood from adult wood in the softwoods of P. densiflora, P. koraiensis, and P. rigida grown in Korea.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.181-186
• /
• 2003

As the approach close-range digital photogrammetry has a variety of merits, the application of precision requiting fields is in Increase for its scope expansion. In the meantime, in case of photographic surveying by use of films, a lot of studies on experiment analysis and theoretical forecast models about a change of the exactness as per photographing coordinates have been conducted, but experiments about approach close-range digital photogrammetry are not enough yet. In consequence, this study has made photographing respectively by changing the photographic distance, converging angle, picturing direction by use of Rollei d7 metric and d7 metric$\^$5/ that is a measurement digital camera. And also in order to minimize the errors happened at the relative orientation, we have sorted out the prototype target that the relative orientation is automatically on the programming and have calculated RMSE by carrying out the bundle adjustment. We think that such a study could be used as very important basic data necessary in deriving the optimal photographic conditions by the close-range digital photogrammetry and in judging such a degree.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.123-133
• /
• 2005

This study has made photographing respectively by changing the converging angle by use of d7 $metric^5$ that is a measurement digital camera. And also in order to minimize the errors happened at the relative orientation, we have sorted out the round target that the relative orientation is automatically on the programming and have calculated RMSE by carrying out the bundle adjustment. We think that such a study could be used as very important basic data necessary in deriving the optimal photographic conditions by the close-range digital photogrammetry and in judging such a degree.

• Journal of Aquaculture
• /
• v.1 no.1
• /
• pp.41-51
• /
• 1988

Experiments were carried out to examine early life history, growth and gonadal development of triploid rainbow trout to evaluate their suitability for commercial aquaculture. A high degree ($96.5\%$) of triploid fish was induced when the fertilized eggs were treated with heat shock. Mean embryonic development time of triploids was slightly shorter than diploids and survival rate of triploid at swim-up was $80.2\%$ relative to control. Erythrocytes and their nuclei of triploid were larger in both axes than those of diploid. Triploid rainbow trout showed improved growth relative of diploid after 1 year of age. Histological analysis of the gonads revealed sterility in triploid fish.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.581-586
• /
• 1998

We investigated the effect of mechanical back side damage in Czochralski grown silicon wafer. The intensity of mechanical damage was evaluated by minority carrier recombination lifetime by laser excitation/microwave reflection photoconductivity decay method, degree of X-ray diffuse scattering, X-ray section topography, and wet oxidation/preferential etching methods. The data indicate that the higher the mechanical damage intensity, the lower the minority carrier lifetime, and the magnitude of diffuse scattering and X-ray excess intensity increased proportionally, and it was at Grade 1:Grade 2:Grade 3=1:7:18.4 that the normalized relative quantization ratio of excess intensity in damaged wafer was calculated, which are normalized to the excess intensity from sample Grade 1.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.157-166
• /
• 2005

This article involves architecting prototype-fuzzy expert system for designing the nominal cover thickness by means of fuzzy inference for quantitatively representing the environment affecting factor to reinforced concrete in chloride-induced corrosion environment. In this work, nominal cover thickness to reinforcement in concrete was determined by the sum of minimum cover thickness and tolerance to that defined from skill level, constructability and the significance of member. Several variables defining the quality of concrete and environment affecting factor (EAF) including relative humidity, temperature, cyclic wet and dry, and the distance from coast were treated as fuzzy variables. To qualify EAF the environment conditions of cycle degree of wet-dry, relative humidity, distance from coast and temperature were used as input variables. To determine the nominal cover thickness a qualified EAF, concrete grade, and water-cement ratio were used. The membership functions of each fuzzy variable were generated from the engineering knowledge and intuition based on some references as well as some international codes of practice.

• Structural Engineering and Mechanics
• /
• v.63 no.1
• /
• pp.23-35
• /
• 2017

A nonlinear static procedure considering work-energy principle and global failure mechanism to estimate base shears of reinforced concrete (RC) frame-type structures is presented. The relative energy equation comprising of elastic vibrational energy, plastic strain energy and seismic input energy is obtained. The input energy is modified with a factor depending on damping ratio and ductility, and the energy that contributes to damage is obtained. The plastic energy is decreased with a factor to consider the reduced hysteretic behavior of RC members. Given the pre-selected failure mechanism, the modified energy balance equality is written using various approximations for modification factors of input energy and plastic energy in scientific literature. External work done by the design lateral forces distributed to story levels in accordance with Turkish Seismic Design Code is calculated considering the target plastic drift. Equating the plastic energy obtained from energy balance to external work done by the equivalent inertia forces considering, a total of 16 energy-based base shears for each frame are derived considering different combinations of modification factors. Ductility related parameters of modification factors are determined from pushover analysis. Relative input energy of multi degree of freedom (MDOF) system is approximated by using the modal-energy-decomposition approach. Energy-based design base shears are compared with those obtained from nonlinear time history (NLTH) analysis using recorded accelerograms. It is found that some of the energy-based base shears are in reasonable agreement with the mean base shear obtained from NLTH analysis.