• Journal of Mechanical Science and Technology
• /
• 제15권8호
• /
• pp.1090-1096
• /
• 2001

In this paper, new methods for efficiently solving linear acceleration equations of multibody dynamic simulation exploiting sparsity for real-time simulation are presented. The coefficient matrix of the equations tends to have a large number of zero entries according to the relative joint coordinate numbering. By adequate joint coordinate numbering, the matrix has minimum off-diagonal terms and a block pattern of non-zero entries and can be solved efficiently. The proposed methods, using sparse Cholesky method and recursive block mass matrix method, take advantages of both the special structure and the sparsity of the coefficient matrix to reduce computation time. The first method solves the η$\times$η sparse coefficient matrix for the accelerations, where η denotes the number of relative coordinates. In the second method, for vehicle dynamic simulation, simple manipulations bring the original problem of dimension η$\times$η to an equivalent problem of dimension 6$\times$6 to be solved for the accelerations of a vehicle chassis. For vehicle dynamic simulation, the proposed solution methods are proved to be more efficient than the classical approaches using reduced Lagrangian multiplier method. With the methods computation time for real-time vehicle dynamic simulation can be reduced up to 14 per cent compared to the classical approach.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1509-1517
• /
• 1993

본 연구에서는 3차원 운동을 하는 다물체 기구가 물체 수와 조인트 연결상태 만 주어진 상태에서 구성상태에 따라 절점 좌표계를 이용하여 모델링하고 MACSYMA를 써서 복잡단조로운 대수 계산을 하여 모든 운동학적 정보를 얻어내며 수치계산이 필요 하면 별도의 프로그램을 이용 수치해석을 하는 과정을 밟는다.

• 한국정보통신학회논문지
• /
• 제15권1호
• /
• pp.89-98
• /
• 2011

본 논문에서는 휴대폰이나 TV 등의 터치화면에 한 번의 터치와 터치된 상태에서의 드래그(drag) 및 방향전환 동작만으로 문자를 용이하게 입력할 수 있고, 다층 구조 메뉴를 신속하고 편리하게 검색 및 선택할 수 있는 새로운 터치 유저 인터페이스 방식을 제안한다. 또한, 터치면의 고정된 위치에 고정된 문자를 할당함으로서 한정된 크기의 터치 면에 여러 문자를 중복할당 할 수 밖에 없는 기존의 절대좌표 방식의 한계성을 극복하기 위하여 터치 위치 이동에 따라 상대좌표를 도출하고 상대좌표에 대응되는 문자를 표시함으로서 한정된 터치영역에서 더 많은 문자를 수용할 수 있는 상대좌표 기반의 문자 할당 및 입력방식을 제안한다. 제안된 방식은 IPTV 플랫폼의 리모컨과 셋톱박스로 구현되어 제안 방식의 실용성과 유효성을 입증한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권2호
• /
• pp.101-111
• /
• 2023

Many spoofing detection studies have been conducted to cope with the most difficult types of deception among various disturbances of GPS, such as jamming, spoofing, and meaconing. In this paper, we propose a spoofing detection scheme based on elevation masked-relative received power between GPS L1 and L2 signals in a system using a multi-band array antenna. The proposed scheme focuses on enabling spoofing to be normally detected and minimizes the possibility of false detection in an environment where false alarms may occur due to pattern distortion among elements of an array antenna. The pattern distortion weakens the GPS signal strength at low elevation. It becomes confusing to detect a spoofing signal based on the relative power difference between GPS L1 and L2, especially when GPS L2 has weak signal strength. We propose design parameters for the relative power threshold including beamforming gain, the minimum received power difference between L1 and L2, and the patch antenna gain difference between L1 and L2. In addition, in order to eliminate the weak signal strength of GPS L2 in the spoofing detection process, we propose a rotation matrix that sets the elevation mask based on platform coordinates. Array antennas generally do not have high usefulness in commercial areas where receivers are operated alone, but are considered essential in military areas where GPS receivers are used together with signal processing for beamforming in the direction of GPS satellites. Through laboratory and live sky tests using the device under test, the proposed scheme with an elevation mask detects spoofing signals well and reduces the probability of false detection relative to that without the elevation mask.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.451-454
• /
• 2007

There is an inseparable relation between human race and engineering work. As world developed into highly industrialized society, a diversity of large structures is being built up correspondently to limited topographical circumstance. Though large structures are national establishments which provide us with convenience of life, there are some disastrous possibilities which were never predicted such as ground subsidence and degradation. It is very difficult to analyze the volume of total metamorphosis with the relative displacement measurement system which is now used and it is impossible to know whether there is structural metamorphosis within a permissible range of design or not. In this research with an object of 13-year-old earthen dam, through generating point-cloud which has 3D spatial coordinates(x, y, z) of this dam by means of 3D Laser Scanning, we can get real configuration data of slanting surface of this dam with this method of getting a number of 3D spatial coordinates(x, y, z). It gives 3D spatial model to us and we can get various information of this dam such as the distance of slanting surface of dam, dimensions and cubic volume. It can be made full use of as important source material of reinforcement and maintenance works to detect previously the bulging of the dam through this research.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.81-84
• /
• 2007

This paper describes general procedure and results of the GPS 3rd odor network adjustment which has been carried out for determining coordinates sets with respect to new Korean Geodetic Datum, so-call Korean Geodetic Datum 2002 (KGD 2002). The adjustment begins with minimally constrained adjustments with respect to each of the 69 campaign networks. This was followed by constructing and adjusting sixteen block network. After detecting and removing outliers in the observation file, an attempt was made by applying the empirical stochastic modeling techniques used in the 2nd order network adjustment, so as to determine the magnitude of absolute and relative error for the estimated baseline vector from the GPS data processing. The over constrained adjustment were, in sequence, performed against each of the block network. In this adjustment, both of the 2nd order control points in the block network and the 3rd order control points overlapped with adjacent network whose coordinates were already determined from a preceding adjustment. The final adjustment results have shown that the accuracy of the 3rd order network adjustment was better than 1cm and 2cm in horizontal and vertical component, respectively.

• 한국정보통신학회논문지
• /
• 제10권7호
• /
• pp.1253-1258
• /
• 2006

모바일 벡터 지도 서비스 환경에는 공간 데이터의 특성상 큰 데이터 용량으로 인한 단말기 리소스 부족과 전송시간 지연과 같은 애로사항이 존재 한다. 정상적인 모바일 벡터 지도 서비스가 이루어지기 위해서는 이러한 문제점들을 극복하기 위한 대책들이 필요하다 그중에서 공간데이터 압축기법은 대역폭과 클라이언트에서의 대기 시간 축소에 도움을 줄 수 있다. 하지만 압축과 복원에 소요되는 오버헤드가 전체 효율에 미치는 영향도 함께 고찰할 필요가있다. 본 논문은 공간 데이터를 압축하기 위한 2가지 기법을 제시한다. 하나는 공간 객체별로 기준 좌표 및 상대 좌표를 전송하는상대좌표 변환 압축기법이고 또 하나는 클라이언트 좌표로 서버에서 미리 좌표 변환하는 클라이언트 좌표 변환 압축 기법이다. 그리고 구현 실험으로 그 효과와 효율을 평가한다.

• 한국연소학회지
• /
• 제13권3호
• /
• pp.1-8
• /
• 2008

A flame stability diagram in a partially premixed flame is typically expressed using the axis coordinates of heat input rate and equivalence ratio. These diagrams are inadequate for identifying changes in combustion conditions and flame stability when a reference fuel is substituted with other fuels under identical operating conditions. This study proposes a new type of diagram and validates it experimentally. In this new diagram, the axis coordinates are air flow rate and Wobbe fuel flow rate, defined as the fuel flow rate multiplied by the square root of the relative density. The diagram was validated in trials using various fuels, including $CH_4$, $C_{3}H_{8}$, and LFG-$C_{3}H_{8}$ mixed fuels, in a domestic gas-range and an gas interchangeability test burner. The results of these trials show that the new diagram can provide information useful for assessing gas interchangeability of combustion conditions and flame stability when one fuel is substituted with another under identical operating conditions.

• 한국광학회지
• /
• 제15권3호
• /
• pp.258-262
• /
• 2004

검출기의 분광감응도 표준으로부터 출발하여 SI 기본 단위의 하나인 칸델라(candela)눈금의 불확도는 복사계 개구의 면적 측정 불확도에 의해서 제한을 받는다. 칸델라 눈금을 새로 실현하기 위하여 다이아몬드 선삭가공기를 사용하여 개구의 가장자리가 칼날과 같도록 가공하였다. 이 개구를 디지털 되먹임 알고리듬을 채용한 x-y 이송대에 설치한 후, 출력이 안정화된 레이저 광선을 빔 허리가 5 $\mu\textrm{m}$ 이하가 되도록 집속시키고, 이송대를 이동하면서 개구의 가장자리 좌표를 칼날주사 방법으로 검출하였다. 이 좌표들을 지나는 최적의 타원을 최소 제곱법으로 결정하여 개구의 면적으로 구하였다. 측정 불확도를 분석한 결과 제작한 장치의 면적 측정의 상대 측정 표준 불확도(k=1)는 8${\times}$$10^{-5}$이다.

• The Journal of Korean Physical Therapy
• /
• 제22권2호
• /
• pp.39-46
• /
• 2010

Purpose: This study was designed to determine whether General Coordinative Manipulation (GCM) Intervention Models have effects on the balanced restoration of asymmetrical muscles in the extremities. Methods: Fifty-nine healthy subjects (1st hypothesis: n=40, 2nd hypothesis: n=19) participated in studies using the two GCM intervention models. Subjects were studied 2 times a week for 3 weeks. Electromyography (EMG) was used to measure muscle activity, and measurements were performed before and after the application of the each intervention model. Results: Hypothesis 1: GCM Intervention, which coordinates flexion types of muscle contractions of the upper extremity and extension types of muscle contractions of the lower extremity (excluding self-care) is effective for treating shows the treatment in efficiency on more than two 2 of 3 muscles (vastus medialis, gastrocnemius medial, and deltoid middle) and the effects affects on more than 3 types of 4 body types (Vastus medialis, Gastrocnemius medial of Body type III, p<0.05). GCM body type was classified by the relative tilting of right and left scapulars and iliums into four groups. Hypothesis 2: GCM Intervention, which coordinates flexion types of muscle contractions of the lower extremity and extension types of muscle contractions of the upper extremity (excluding self-care) is effective for treating more than two 2 of 3 muscles (vastus medialis, gastrocnemius medial, and deltoid middle) and the effects affects on more than 2 types of 3 body types (p>0.05).