• Journal of the Chungcheong Mathematical Society
• /
• v.22 no.3
• /
• pp.525-534
• /
• 2009

In this paper the relative regular relations with respect to a homomorphism are defined and it will be given the necessary and sufficient conditions for the relations to be transitive.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.4
• /
• pp.351-362
• /
• 2012

We made a study on real-time determination method for relative position using the laser-measured distance data between satellites. We numerically performed the determination of relative position in accordance with extended Kalman filter algorithm using the vectors obtained through nonlinear equation of relative motion, laser simulator for distance measurement, and attitude determination of chief satellite. Because the spherical parameters of relative distance and direction are used, there occur some changes in precision depending on changes in relative distance when determining the relative position. As a result of simulation, it was possible to determine the relative position with several millimeter-level errors at a distance of 10 km, and sub-millimeter level errors at a distance of 1 km. In addition, we performed the determination of relative position assuming the case that global positioning system data was not received for long hours to see the impact of determination of chief satellite orbit on the determination of relative position. The determination of precise relative position at a long distance carried out in this study can be used for scientific mission using the satellite formation flying.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.1
• /
• pp.77-88
• /
• 2015

The dynamics of relative motion in a perturbed orbital environment are exploited based on Gauss' and Cowell's variational equations. The inertial coordinate frame and relative coordinate frame (Hill frame) are used, and a linear high fidelity model is developed to describe the relative motion. This model takes into account the primary gravitational and atmospheric drag perturbations. Then, this model is used in the design of a navigation, guidance, and control system of a chaser vehicle to approach towards and to depart from a target vehicle in proximity operations. Relative navigation uses an extended Kalman filter based on this relative model to estimate the relative position/velocity of the chaser vehicle with respect to the target vehicle. This filter uses the range and angle measurements of the target relative to the chaser from a simulated LIDAR system. The corresponding measurement models, process noise matrix, and other filter parameters are provided. Numerical simulations are performed to assess the precision of this model with respect to the full nonlinear model. The analyses include the navigation errors and trajectory dispersions.

• Cross-Cultural Studies
• /
• v.19
• /
• pp.359-388
• /
• 2010

This study is aimed to investigate the aspect of using relative clauses in Korean. The data used for this study were extracted from the Korean text books for the foreign students and from the Chinese students' Korean compositions. They are the learners of Korean language at the early intermediated stage. As the result of analyzing them, the followings were found I)the majority of relative clauses in Korean consists of left-branching sentences. ii)The number of the subject relative clauses was higher than object ones in both of them. Especially in the aspect of using relative clauses, subject ones were used even more frequently than objective ones. This result is corresponded to the previous thesis, "the subject relative clauses was acquired earlier than object ones". iii)The relative clauses that those with a head noun function as subject in the main sentence showed in higher proportion in comparison of those as object. That is, this study showed that subjects were used more frequently than objects in the relative clauses used in their compositions. Finally, this study analyzed the errors of adnominal ending usage occurring in their compositions. More errors occurred when adjective form ended with '-hada' are changed into adnominal ending one.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.4
• /
• pp.387-394
• /
• 2019

This paper presents an analytical study on the strength and stiffness of various types of truss structures. The applied models are triangular-like opened truss-wall triangular model (OTT), closed truss-wall triangular model (CTT), opened solid-wall triangular model (OST), and hypercube models defined as core-filled or core-spaced cube. The models are analyzed by numerical model analysis using DEFORM 2D/3D tool with AISI 304 stainless steel. Then, the ideal solutions for stiffness and strength are defined. Finally, the relative elastic modulus of the core-spaced model is obtained as 0.0009, which is correlated with the cancellous bone for the relative density range of 0.029-0.03, and the relative elastic modulus for the core-filled model is obtained as 0.0015, which is correlated with cancellous bone for the relative density range of 0.035-0.036. For the relative compressive yield strength, the OTT reasonably agrees with the cancellous bone for the relative density of 0.042 and the relative compressive strength of 0.05. The CTT and OST are in good agreement at the relative density of 0.013 and the relative compressive yield strength of 0.002. The hypercube models can be used for the cancellous bone for stiffness, and the triangular models can be used for the cancellous bone for strength. However, none of the models can be used to replace the compact bone because it requires much higher stiffness and strength. In the near future, compact bone replacement must be further studied. In addition, previously mentioned models should be developed further.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.4
• /
• pp.101-107
• /
• 2022

To test a flameproof enclosure for the safety certificate, a reference pressure of explosion needs to be determined. However, the explosion pressure may be changed according to relative humidity of explosive gases. Therefore, the guideline on relative humidity should be recommended for measuring the explosion pressure for accurate and reproducible testings. This study examined the relationship of explosion pressure with relative humidity of hydrogen (31 vol %)-air and acetylene (14 vol %)-air mixture gases. The explosion pressures were measured by increasing the relative humidity of the gases by 10 % from dry state to 80 % in a cylindrical explosion enclosure of 2.3 L. on ambient temperature and atmospheric pressure (1 atm). The maximum explosive pressures were remained almost constant until the relative humidity reached 10 % for the hydrogen-air mixture and 20 % for the acetylene-air mixture. However, the maximum explosive pressures linearly decreased as the relative humidity increased. Based on the results of the study, it would be recommended to use 10 % relative humidity for the hydrogen-air mixture and 20 % for the acetylene-air mixture as the critical value in testing a flameproof enclosure.

• Korean Journal of Cognitive Science
• /
• v.4 no.2
• /
• pp.29-51
• /
• 1994

This paper presents a new approach to describing the meanings of English relative clauses with the theoretical framework of Conceptual Structure Theory (henceforth CST)which builds on the pionerring work of Sowa.And this paper aims at proposing some extensions to his work. CST describes the conceptual structrures of sentences with conceptual graphs(henceforth CG). which have begun to be used as an intermediate language in natural language processing and machine translation of computer.CGs are composed of concept types and conceptual relation types. They are a system of logic for semantic representation of sentences. This paper focuses on showing the differences of the CGs according to the functions of English relative clauses. English relative clauses are divided into restrictive and nonrestrictive uses.And this paper describes a restrictive clause with a CG including a expression.which derives from the viewpoint of Montague-semantics and Nom-S Analysis.This paper deals mainly with the relative clauses of double restroction as an example of restrictive relative clauses.The description of a nonrestrictive relative clause does not need any-expression, for it doesn's involve the meaning of set.And this paper links the CG of an appositive relative clause,which is a kind of nonrestrictive clauses,to the concept of the antecedent in the main clause.The description of a nonrestrictive relative clause with adverbial meaning is strated with two CGs for the main clause and the relative clause.They are linked with an appropriate intersentential conceptual relation type according to the contextual realtions between them.This paper also presents a CG of a sentential relative clause,which gives a comment on the main clause.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.355-361
• /
• 2014

The aim of the present study was to evaluate a relative emission of image plate (IP) in computed radiography (CR) system by using relative sensitivity in film/screen methods. The characteristic curve was obtained by using the uniform aluminum 11-step wedge penetrometer. X-ray exposure factors on radiographic digital image were 50 kVp, 10 mAs. We adjusted zero of all parameter of algorithms (MUSICA) so proximate to raw data and applied to 200 of exposure class. Modeling on relative emission of IP are used IP without fading time and IP after 4 hours, 8 hours, 12 hours, 24 hours in the respective storage after X-ray exposure. The results of this study showed that the sensitivity point density at the measuring of relative sensitivity in CR was suited pixel values of the 2000 easy to relatively measure the characteristic curve and when relative sensitivity is decreased, the amount of light emitted from the image signal for generating was also decreased. In conclusion, the proposed method of measurement of relative sensitivity can be utilized to evaluate the quantity of relative emission of IP in CR system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.37-42
• /
• 2010

The properties of paper are very susceptible to moisture content originated from relative humidity. This propensity of PVA impregnated paper was investigated in this study. Especially the hardening effect of borax treatment after PVA impregnation on the response of paper sample to the relative humidity was evaluated. When the moisture content was increased with the relative humidity, tensile stretch and tear resistance were increased while tensile strength and stiffness were decreased. A great increase in folding endurance of PVA impregnated paper sample was found at the higher relative humidity. The borax treatment could reduce the response of PVA impregated paper to the relative humidity.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.160-161
• /
• 2017

In In this study, we measured the relative density and the compressive strength in order to select the appropriate W/B for the ultra-high strength concrete development. If W/B is lowered than the W/B of highest relative density, it was confirmed that the strength is lowered. However, if water is increased than the W/B, the relative density is decreased compressive strength was similar. The selection of the W/B of the lower than the highest relative density is not appropriate. Appropriate W/B is selected to be more than the maximum relative density of W/B. This was confirmed for TG-DTA.