• Transactions on Electrical and Electronic Materials
• /
• v.2 no.3
• /
• pp.24-27
• /
• 2001

The end point of oxide chemical mechanical polishing (CMP) have determined by polishing time calculated from removal rate and target thickness of oxide. This study is about control of oxide removal amounts on the shallow trench isolation (STI) patterned wafers using removal rate and thickness of blanket (non-patterned) wafers. At first, it was investigated the removal properties of PETEOS blanket wafers, and then it was compared with the removal properties and the planarization (step height) as a function of polishing time of the specific STI patterned wafers. We found that there is a relationship between the oxide removal amounts of blanket and patterned wafers. We analyzed this relationship, and the post CMP thickness of patterned wafers could be controlled by removal rate and removal target thickness of blanket wafers. As the result of correlation analysis, we confirmed that there was the strong correlation between patterned and blanket wafer (correlation factor: 0.7109). So, we could confirm the repeatability as applying for STI CMP process from the obtained linear formula. As the result of repeatability test, the differences of calculated polishing time and actual polishing time was about 3.48 seconds. If this time is converted into the thickness, then it is from 104 $\AA$ to 167 $\AA$. It is possible to be ignored because process margin is about 1800 $\AA$.

• Imaging Science in Dentistry
• /
• v.51 no.4
• /
• pp.373-382
• /
• 2021

Purpose: Cone-beam computed tomography (CBCT) reconstructions were analysed to elucidate factors affecting the anatomical relationship between tooth roots and the mandibular canal(MC). Materials and Methods: Images of 300 volumetric tomography scans of patients aged between 20 and 79 years old (167 women and 133 men) were analysed. The mean distances between 2,053 dental root apices and the internal border of the MC were obtained by measuring the horizontal and vertical distances on coronal CBCT images. The actual distance was then calculated mathematically with the Pythagorean formula. The statistical significance of differences between men and women was assessed using the Mann-Whitney test. Correlations with patient age were evaluated with the Spearman rank correlation coefficient. Results: The mean distances ranged from 2.17 mm, for single right third molar roots in women, to 8.02 mm for single left third molar mesiolingual roots in men. The mean distances measured for the mandibular right second molar mesial roots and the right second premolar roots were larger in men than in women. Age showed a significant positive correlation with the measured distances for mesial and distal roots of the first and second molar on both sides and the right third molar, mesiolingual roots of the left third molar, and single roots of the right third molar. Conclusion: The root-to-mandibular canal distance depended on age and the type of tooth. In 2 root types, this distance was impacted by sex.

• Smart Structures and Systems
• /
• v.30 no.4
• /
• pp.353-369
• /
• 2022

In this paper, a new sensor chip with frequency reconstruction range of 2.252 GHz ~ 2.450 GHz is designed and fabricated. On this basis, a self-designed "T-shaped" shell is added to overcome the disadvantage of uneven deformation of the traditional steel shell, and the range of the sensor chip is expanded to 0 kN ~ 96 kN. The liquid metal antenna is used to carry out a step-by-step loading test, and the relationship between the antenna resonance frequency and the pressure load is analyzed. The results show that there is a good linear relationship between the pressure load and the resonant frequency. Therefore, the liquid metal antenna can be regarded as a pressure sensor. The cyclic loading and unloading experiments of the sensor are carried out, and different loading rates are used to explore the influence on the performance of the sensor. The loading and unloading characteristic curves and the influence characteristic curves of loading rate are plotted. The experimental results show that the sensor has no residual deformation during the cycle of loading and unloading. Moreover, the influence of temperature on the performance of the sensor is studied, and the temperature correction formula is derived.

• The Journal of Economics, Marketing and Management
• /
• v.3 no.2
• /
• pp.9-20
• /
• 2015

Could blood type provide a key to wellness and even affect our personality? The theory that blood type is linked to personality (and other mental and physical qualities) is popular mainly in Japan, though it has carried over to Taiwan and South Korea. The present study is the result of a scientific research in which the relationship between two important variables, namely blood group a nd group participation, are determined in the research framework. Based on some collected data from manufacturing firms which are accepted firms in Tehran Stock Exchange, and through cluster sampling a sample was selected. 380 questionnaires were distributed to the personnel of production line, of the firms then the reliability and validity of the questionnaires through independence test and average ratio comparison of the two population were examined, and through Pearson's chi-square formula, the relationship between blood group (independent variable) and group participation (dependent variable) were tested, then through Schuprow coefficient, the prioritization of blood groups over group participation was identified and the following results were obtained: people group participation is affected by their personality features which is derived from their temperament, mood, and characteristics. The study also showed that people blood groups has an effect on their group cooperation, and among blood groups, blood group A has the greatest tendency to group participation and then blood group O, AB, B are prioritized respectively.

• Journal of Korean Society of Transportation
• /
• v.9 no.2
• /
• pp.27-40
• /
• 1991

Delay is an widely-used tool for evaluating the operation of signalized intersections. This paper presents two mathematical models: a model converting stop delay into approach delay : and a model estimating delay at isolated signalized intersection. To develop the delay-conversion model, actual stop delay and approach delay experienced by individual vehicles were measured and then their relationship was formulated using ma-thematical procedure. the formula expressing the approach-delay to stop-delay ratio was a monotonously decreasing function of effective red time. New delay model was developed based on the following criteria; the fitness to measured delay for undersaturated traffic condition and the convergence to the deterministic overflow delay for oversaturated traffic condition. Performance of this model was better than those of other existing models based on the comparison study.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.702-704
• /
• 2004

This paper focuses on the problem of asymptotic stabilization for uncertain time-delay systems with saturating actuator. We propose a state feedback controller which maximizes the delay bound for guaranteeing stability of the system. Then, based on the Lyapunov method, a delay-dependent stabilization criterion is devised by taking the relationship between the terms in the Leibniz-Newton formula into account. The criterion is represented in terms of LMIs, which can be solved by various efficient convex optimization algorithm. Numerical examples are given to illustrate our main method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.5
• /
• pp.263-270
• /
• 2003

In field applications, to represent the degree of voltage unbalance, the maximum voltage deviation from the average is preferred to the voltage unbalance factor based on symmetrical component analysis. This paper first clarifies the relationship between the voltage unbalance factor and the maximum deviation factor showing that the maximum deviation factor approximates the voltage unbalance factor under relatively low unbalanced conditions. Several alternative ways of approximation are introduced and examined by comparing with the conventional maximum deviation factor. It appears that these alternatives provide more accurate approximation to the voltage unbalance factor over wider range of voltage unbalance while maintaining simplicity in their formula.

• Journal of Environmental Science International
• /
• v.9 no.6
• /
• pp.469-474
• /
• 2000

The traffic accidents in large cities such as Pusan metropolitan city have been increased every year due to increasing of vehicles numbers as well as the gravitation of the population. In addition to the carelessness of drivers, many meteorological factors have a great influence on the traffic accidents. Especially, the number of traffic accidents is governed by precipitation, visibility, cloud amounts temperature, etc. In this study, we have analyzed various data of meteorological factors from 1992 to 1997 and determined the standardized values for contributing to each traffic accident. Using the relationship between meteorological factors(visibility, precipitation, relative humidity and cloud amounts) and the total automobile mishaps, and experimental prediction formula for their traffic accident rates was seasonally obtained at Pusan city in 1997. Therefore, these prediction formulas at each meteorological factor may by used to predict the seasonal traffic accident numbers and contributed to estimate the variation of its value according to the weather condition it Pusan city.

• 전기의세계
• /
• v.17 no.2
• /
• pp.11-15
• /
• 1968

One of the most important methods used in the modern analysis of linear networks and systems is the signal flow graph technique, first introduced by S.J. Mason in 1953. In essence, the signal-flow graph technique is a graphical method of solving a set of simultaneous. It can, therefore, be regarded as an alternative to the substitution method or the conventional matrix method. Since a flow-graph is the pictorial representation of a set of equations, it has an obvious advantage, i.e., it describes the flow of signals from one point of a system to another. Thus it provides cause-and-effect relationship between signals. And it often significantly reduces the work involved, and also yields an easy, systematic manipulation of variables of interest. Mason's formula is very powerful, but it is applicable only when the desired quantity is the transmission gain between the source node and sink node. In this paper, author summarizes the signal-flow graph technique, and stipulates three rules for conversion of an arbitrary nonsource node into a source node. Then heuses the conversion rules to obtain various quantities, i.e., networks gains, functions and parameters, through simple graphical manipulations.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.91-96
• /
• 1998

An empirical relationship which can be calculated to the lattice constants $a_0$ and $c_0$ for the borate crystals with huntite structure were determined. Different compositions of twenty-eight were used for the calculations. These empirical formulas can be used to predict lattice parameters of unknown compositions as a function of the average ionic radii in the trigonal and octahedral sites of the huntite structure.