• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1150-1157
• /
• 1988

본 연구에서는 수치계산을 통해 진행하는 방향에 수직으로 일정한 압력구배를 받는 2차원 난류 자유제트의 발달을 고려해 보고자 한다.속도장을 구한 후에는 제 트의 온도가 주위온도 보다 높을 경우와 또 제트를 사이에 둔 양쪽 유체에 온도차가 있을때의 열확산 특성도 함께 알아보려는 것이다. 수직 방향으로 압력구배가 있는 유동장은 최근 활발히 연구가 진행되는 분야인 제트축에 수직방향으로 주위유동이 있 는 경우와 흡사하며 제트를 통한 열확산현상은 air curtain등 실제 응용도가 큼에도 불구하고 문헌에 보고된 것이 별로 없는 것으로 보여진다.

• Journal of Korean Neurosurgical Society
• /
• 제60권5호
• /
• pp.550-559
• /
• 2017

Objective : Subsidence is a frequent complication of anterior cervical discectomy and fusion. Postoperative segmental micromotion, thought to be a causative factor of subsidence, has been speculated to increase with uncinate process resection area (UPR). To evaluate the effect of UPR on micro-motion, we designed a method to measure UPR area based on pre- and postoperative computed tomography images and analyzed the relationship between UPR and subsidence as a proxy of micro-motion. Methods : We retrospectively collected clinical and radiological data from January 2011 to June 2016. A total of 38 patients (53 segments) were included. All procedures included bilateral UPR and anterior plate fixation. UPR area was evaluated with reformatted coronal computer tomography images. To reduce level-related bias, we converted UPR area to the proportion of UPR to the pre-operative UP area (pUPR). Results : Subsidence occurred in 18 segments (34%) and positively correlated with right-side pUPR, left-side pUPR, and the sum of bilateral pUPR (sum pUPR) (R=0.310, 301, 364; p=0.024, 0.029, 0.007, respectively). Multiple linear regression analysis revealed that subsidence could be estimated with the following formula : $subsidence=1.522+2.7{\times}sum\;pUPR$($R^2=0.133$, p=0.007). Receiver-operating characteristic analysis determined that sum $pUPR{\geq}0.38$ could serve as a threshold for significantly increased risk of subsidence (p=0.005, area under curve=0.737, sensitivity=94%, specificity=51%). This threshold was confirmed by logistic regression analysis for subsidence (p=0.009, odds ratio=8.471). Conclusion : The UPR measurement method confirmed that UPR was correlated with subsidence. Particularly when the sum of pUPR is ${\geq}38%$, the possibility of subsidence increased.

• 한국응용과학기술학회지
• /
• 제8권2호
• /
• pp.115-122
• /
• 1991

Four novel amphoteric surfactants of N-(2-alkylamidoethyl)-N, N-dimethyl ammonioacetates were synthesized. The each reaction between four saturated fatty acids containing 10, 12, 14 and 16 carbon atoms and N, N-dimethylethylene diamine permitted to give the intermediate products, N-(2-alkylamidoethyl)-N, N-dimethylamines. Quaterinzation of these intermediates was permitted to form N-(2-alkylamidoethyl)-N, N-dimethyl, ammonioacetates, whose sturctures were identified by CC, TLC, elemental analysis, IR pectrophotometry and $^1$HNMR spectrometry. The products yielded from 48% to 58%. The isoelectric points were shown in the range of $4.30{\sim}6.64$. It showed a tendency to learn to the acidic site and its range was broadened as increase of the hydrophobic group length. Surface tensions of the aqueous solution in the $10^{-6}{\sim}10^{-1}$mol/l of amidobetaines were measured. and the critical micell concentration(cmc) were shown in the range of $8.37{\times}10^{-6}{\sim}8.96{\times}10^{-2}$mol/l, and ${\Gamma}_{cmc}$ were reduced to 32.3~38.2 dyne/cm. A linear relationship between log cmc and the number of carbon in the hydrophobic alkyl chain was presented by the formula of log cmc=2.38-0.5n, and the contribution-rate of n on the standard free energy change in micellization ${\partial}({\Delta}G^0$$_m)/{\partial}n$, was calulated as -0.5RT.

• Steel and Composite Structures
• /
• 제36권1호
• /
• pp.103-118
• /
• 2020

The static behavior of grouped large-headed studs (d = 30 mm) embedded in ultra-high performance concrete (UHPC) was investigated by conducting push-out tests and numerical analysis. In the push-out test, no splitting cracks were found in the UHPC slab, and the shank failure control the shear capacity, indicating the large-headed stud matches well with the mechanical properties of UHPC. Besides, it is found that the shear resistance of the stud embedded in UHPC is 11.4% higher than that embedded in normal strength concrete, indicating that the shear resistance was improved. Regarding the numerical analysis, the parametric study was conducted to investigate the influence of the concrete strength, aspect ratio of stud, stud diameter, and the spacing of stud in the direction of shear force on the shear performance of the large-headed stud. It is found that the stud diameter and stud spacing have an obvious influence on the shear resistance. Based on the test and numerical analysis results, a formula was established to predict the load-slip relationship. The comparison indicates that the predicted results agree well with the test results. To accurately predict the shear resistance of the stud embedded in UHPC, a design equation for shear strength is proposed. The ratio of the calculation results to the test results is 0.99.

• 대한원격탐사학회지
• /
• 제22권4호
• /
• pp.285-294
• /
• 2006

위성영상의 한 점과 그에 대응하는 지상점의 관계를 수학적으로 나타낸 것을 센서모델이라고 한다. 위성영상의 정밀기하보정을 위해서는 오차가 없는 센서모델이 필요하다. 그러나 IMC가 꺼진 상태에서 제공된 GOES-9 궤도 데이터에 기반한 센서모델은 오차가 존재한다. 이러한 문제를 해결하기 위하여 공선 방정식 기반 모델, DLT 기반 모델, 궤도-자세 기반 모델의 세 가지 센서모델에 대하여 실험을 진행하였다. 실험에서는 위성영상과 해안선 데이터베이스를 정합시켜 성공한 결과를 기준점으로 사용하였다. 이렇게 선택된 기준점으로 세 가지 센서모델을 이용하여 GOES-9 영상에 적용시켜 초기 기하보정 정확도를 향상시키고 세 모델간의 정확도를 비교하였다. 최종적으로 궤도-자세 기반 모델이 GOES-9 영상의 정밀기하보정에 가장 적합한 센서 모델임을 증명하였다.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.67-73
• /
• 2019

An ultra-high pressure treatment device is a device used for increasing the shelf life of food by sterilizing it by applying hydrostatic pressure to solid or liquid food. The ultrahigh pressure treatment system developed in this study is a pressure vessel with a processing capacity of 100 L and a maximum pressure of 700 MPa. Pressure vessels for ultrahigh-pressure processing equipment are manufactured using wire-winding techniques. The design formula for making ultra-high pressure vessels with wire windings is given in ASME Section VIII - Division 3. In this study, the ratio of the cylinder to the winding area that can be applied in a wire-winding application was analyzed using a finite element analysis. Furthermore, the relationship between the variation of the residual stress in the vessel and the ratio of the winding area due to the variation of the winding tension was analyzed, and a design guide applicable to the actual product design was developed. Finally, the design equation was modified by presenting the coefficients to correct the difference between the finite element analysis and the design equation.

• Structural Engineering and Mechanics
• /
• 제72권1호
• /
• pp.43-60
• /
• 2019

This paper presents a finite element model which can simulate the axial compression behavior of steel reinforced recycled concrete (SRRC) filled square steel tube columns using the ABAQUS software. The analytical model was established by selecting the reasonable nonlinear analysis theory and the constitutive relationship of material in the columns. The nonlinear analysis of failure modes, deformation characteristics, stress nephogram, and load-strain curves of columns under axial loads was performed in detail. Meanwhile, the influences of recycled coarse aggregate (RCA) replacement percentage, profile steel ratio, width thickness ratio of square steel tube, RAC strength and slenderness ratio on the axial compression behavior of columns were also analyzed carefully. It shows that the results of finite element analysis are in good agreement with the experimental results, which verifies the validity of the analytical model. The axial bearing capacity of columns decreased with the increase of RCA replacement percentage. While the increase of wall thickness of square steel tube, profile steel ratio and RAC strength were all beneficial to improve the bearing capacity of columns. Additionally, the parameter analysis of finite element analysis on the columns was also carried out by using the above numerical model. In general, the SRRC filled square steel tube columns have high bearing capacity and good deformation ability. On the basis of the above analysis, a modified formula based on the American ANSI/AISC 360-10 was proposed to calculate the nominal axial bearing capacity of the columns under axial loads. The research conclusions can provide some references for the engineering application of this kind of columns.

• 대한한방내과학회지
• /
• 제42권4호
• /
• pp.628-644
• /
• 2021

Objectives: This study analyzed, through network analysis and data mining analysis, the relationship between herbs used in osteoporosis prescriptions, diversified the analysis of osteoporosis-related prescriptions, and analyzed the combination of herbs used in osteoporosis-related prescriptions. Methods: The prescriptions used in osteoporosis treatment and experiments were established by conducting a full survey of the papers published by the OASIS site. A database for osteoporosis-related prescriptions was established, herbs were extracted, and the frequency of frequent herbs and prescriptions were investigated using Excel (MS offices ver. 2013). Using the freeware R version 4.0.3 (2020-10-10), igraph, and arules package, network analysis was performed in the first second of prescription composition. Results: Among the osteoporosis-related prescriptions, the most studied prescriptions are as follows.: Yukmijihwang-tang (六味地黃湯) and Samul-tang (四物湯). In the osteoporosis prescription network, herbs with connection centrality, proximity centrality, mediation centrality, and eigenvector centrality appeared in the order of Rehmanniae Radix Preparata, Angelicae Gigantis Radix, Poria Sclerotium, Paeoniae Radix, and Glycyrrhizae Radix et Rhizoma. After extracting the herbal combination network, including the corresponding herbs, and clustering it, it can be divided into drugs of the Yukmijihwang-tang (六味地黃湯) series and the Samul-tang (四物湯). Conclusions: This study could assist researchers in diversifyingy formula analysis in future studies. Moreover, the herbal combination used in osteoporosis prescriptions could be used to search for osteoporosis prescriptions in other databases or to create a new prescription.

• 전기학회논문지P
• /
• 제67권4호
• /
• pp.200-207
• /
• 2018

In recent, KEPCO (Korea Electric Power Corporation) faced difficulties of the DCC (distribution control center) due to the increase of field equipment and operational cost, and aging of operating staffs. In response to these changes in the DCC, KEPCO is trying to change the organization and system of the DCC. In this paper, we present a new attempt to change organization and structure of distribution control center, which was implemented by KEPCO recently. This paper is divided into three major parts. First, to examine the adequacy of the divided basis of current DCCs based on the quantity of installed electrical equipment, we analyzed the correlation between the operational history of the DCCs and the number of equipment. Through the analysis, we confirmed that there is little relationship between the number of equipment and actual workload. Second, we conducted visits and questionnaire surveys of all the DCCs to identify factors affecting the actual workload of distribution operators and then summarized the results. Third, based on this survey, a general formula for analyzing the workload of a DCC was derived, and each DCC's average annual total workload, day/night workload, and required number of personnel were calculated. Through this study, we proposed a more realistic management method of DCCs that can overcome the division criteria based on equipment quantity.

• 대한지역사회영양학회지
• /
• 제24권2호
• /
• pp.97-105
• /
• 2019

Objectives: This study examined whether the infant feeding type and duration are related to the introduction of complementary feeding, and whether the appropriate introduction of complementary feeding in infancy is related to tooth decay in toddlers. Methods: The subjects were 1,521 toddlers among 2~3 year old children in the Korea National Health and Nutrition Examination Survey from 2008 to 2015. The toddlers were divided into the appropriate group (4~6 months) and delayed group (>6 months) according to the timing of complementary feeding introduction. Results: The delayed group were 26.5% of subjects and the formula feeding period in the appropriate group and delayed group was 8.4 and 10.3 months, respectively (P=0.002). On the other hand, there was no difference in the breastfeeding period between the appropriate group and delayed group (P=0.6955). Early childhood caries was more common in the delayed group (P=0.0065). The delayed introduction of complementary feeding was associated with a risk of early childhood caries according to the logistic models (OR 1.81, 95% CI 1.27-2.57). Conclusions: The introduction of complementary feeding is associated with early childhood caries. Therefore, the importance of the proper introduction of complementary feeding in infancy should be emphasized, and public relations and education for maternal care and breastfeeding should be provided through health care institutions.