• Journal of Adhesion and Interface
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2017

This study is about basic sensor experiment using PDPS by common pencil. 20 mm length, 3 mm thickness of line using 4B pencil is optimum condition. In order to be stable at point of contact between pencil line and copper wire, silver paste is needed. At using the PDPS, thermal detecting is able and thermal properties is inversely proportional to electrical resistance in the based on empirical formula. The sensor can be also used in the composites mold via the empirical formula by the relationship between thermal impact and electrical resistance. The change of electrical resistance relates the interfacial property of composites. It leads to expectation of properties.

• Herbal Formula Science
• /
• v.31 no.3
• /
• pp.203-213
• /
• 2023

Objectives : The purpose of this study is to report the symptomatic relief effect of a herbal prescription combined with methimazole for hyperthyroidism caused by Graves' disease. Methods : After diagnosis of hyperthyroidism, methimazole was initially administered alone. As the clinical symptoms continued, a herbal medicine combining Gamiondam-tang and Cheongsimyeonja-eum was administered together with methimazole. Blood concentrations of hormones were measured, and the degree of clinical symptoms was measured using the NRS scale. The effect of herbal medicine on heat intolerance was analyzed by Wilcoxon rank sum test, and the relationship between thyroid hormone and heat intolerance was analyzed by Pearson's correlation coefficient. Results : Heat intolerance symptoms were significantly reduced when the herbal prescription was administered in parallel than when methimazole was administered alone (w=296, p=0.001). The decrease in heat intolerance was not related to thyroid hormone levels (p=0.27, 0.37). Conclusions : It was found that the herbal medicine combining Gamiondam-tang and Cheongsimyeonja-eum was effective in treating hyperthyroidism symptoms including heat intolerance.

• Herbal Formula Science
• /
• v.31 no.4
• /
• pp.245-252
• /
• 2023

Objectives : The purpose of this study was to explore the compounds, targets and related diseases of garlic by the approaches of network pharmacology and bioinformatics in traditional chinese medicine. Methods : We investigated components and their target molecules of garlic using SymMap and TCMSP and they were compared with analysis platform. Results : 56 potential compounds were identified in garlic, 26 of which contained target information, and it was found that these 26 compounds and 154 targets interact with each other through a combination of 243 compounds. In addition, Apigenin was linked to the most targeted gene (78) in 26 compounds, followed by Kaempferol (61 genes), Nicotic Acid (14 genes), Geraniol (11 genes), Eee (10 genes), and Sobrol A (9 genes). Among 56 potential compounds, three compounds (Kaempferol, Dipterocarpol, and N-Methyl cytisine) corresponded to the active compound by screening criterion Absorption, Distribution, Metabolism, Excretion (ADME). In addition, 12 compounds in 56 potential compounds were associated with gastrointestinal (GI) motility disorder. Among them, Kaempferol was a compound that met the ADME parameters and the rest were potential compounds that did not meet. Also, Kaempferol was closely related to GI motility disorder, indicating that this Kaempferol could be a candidate for potential medical efficacy. Conclusions : It shows the relationship between the compound of garlic, an herbal supplement, and the biological process associated with GI motility disorder. These results are thought to help develop strategies for treating GI motility disorders.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.426-441
• /
• 2018

Recently, the generalized Hoek-Brown (GHB) failure criterion has been actively employed in various rock engineering calculations, but the analytical form of the corresponding Mohr failure envelope is not available, making it difficult to extend the application of the GHB criterion. In order to overcome this disadvantage, this study proposes a new method to express the tangential friction angle as an explicit function of normal stress by invoking the polynomial best-fitting to the relationship between normal stress and tangent friction angle implied in the GHB failure function. If this normal stress - tangential friction angle relationship is best-fitted with linear or quadratic polynomial function, it is possible to find the analytical root for tangential friction angle. Subsequently, incorporating the root into the relationship between shear stress and tangential friction angle accomplishes the derivation of the approximate Mohr envelope for the GHB criterion. It is demonstrated that the derived approximate Mohr failure envelopes are very accurate in the entire range of GSI value.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.47-51
• /
• 1974

In order to prove the similarity relationships between the basic species of oak through Electronic Data Processing System(EDPS) and numerical analysis, The analized species and datas were selected from the list of morphological observation in the thesis of T.B. Lee, 1961, "Phytogenetic study of the subgenus Lepidobalanus of the genus Quercus in Korea", and were coded by categories shown in Table 1. The value in the list were transformed into hundred percentage to standardize the observational value by each code into dimensionless. The similarity index between species were computed through formula of non-metric coefficient, $N_{jk}=\sum\limits_{i=1}^{n}\(\frac{{\mid}x_{ij}-x_{ik}{\mid}}{x_{ij}+x_{ik}}\)$, using the UNiVAC-1106, at National Computer Center. Quercus aliena, by analysis result, is most similar to Q. mongolica with the similarity index, 71.6 and Q. dentata is most far apart from Q. serrata in the relationship with index, 121.4. The above thesis of Professor, T. Lee, are closely similar with the result of this research study. But, their similar relationship are proved in quantity through numerical method in our research study. In addition, The relationships among Q. mongolica, Q. aliena and Q. serrata are found to be very similar, but Q. dentata to be enough far in similarity to other species by dendrogram shown at Fig. 1. The numerical classification through EDPS is found to be suitable method also applicable to the plant taxonomy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.459-468
• /
• 2014

An additional relationship equation is numerically obtained to increase the accuracy of the conventional equation for obtaining the resonant frequency of a resonator. Although the conventional equation is widely used in industry because of its simplicity, it does not provide enough information on the cavity or the neck of the resonator for noise reduction in a duct. Resonator designers have difficulty implementing resonator design owing to the uncertainty in geometry presented by the well-known formula for determining the resonant frequency. To overcome this problem, this work determines an approximate equation using results of numerical calculation. To this end, shape parameters of the neck and cavity of a resonator are defined, and an equation describing the relationship between them is derived by adjusting the peak frequency in the transmission loss curve of a resonator to its resonant frequency. The application and validity of the derived equation are investigated in a numerical simulation and an acoustic experiment, respectively.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.299-305
• /
• 2017

Magnetic fluid, a new type of magnetic material, is a colloidal liquid constituted of nano-scale ferromagnetic particles suspended in carrier fluid. Magnetic fluid sealing is one of the most successful applications of magnetic fluid. As a new type of seal offering the advantages of no leakage, long life and high reliability, the magnetic fluid seal has been widely utilized under vacuum- and low-pressure-differential conditions. In practical applications, for improved pressure capacity, a multistage sealing structure is always used. However, in engineering applications, a uniform distribution of magnetic fluid under each tooth often cannot be achieved, which problem weakens the overall pressure capacity of the seals. In order to improve the pressure capacity of magnetic fluid seals and broaden their applications, the present study theoretically and experimentally analyzed the degree of non-uniform distribution of multistage magnetic fluid seals. A mathematical model reflecting the relationship between the pressure capacity and the distribution of magnetic fluid under a single tooth was constructed, and a formula showing the relationship between the volume of magnetic fluid and its contact width with the shaft was derived. Furthermore, the relationship of magnetic fluid volume to capacity was analyzed. Thereby, the causes of non-uniform distribution could be verified: injection of magnetic fluid; the assembly of magnetic fluid seals; the change of magnetic fluid silhouette under pressure loading; the magnetic fluid sealing mechanism of pressure transmission, and seal failure. In consideration of these causes, methods to improve the pressure capacity of magnetic fluid seals was devised (and is herein proposed).

• Nutrition Research and Practice
• /
• v.13 no.2
• /
• pp.150-158
• /
• 2019

BACKGROUND/OBJECTIVES: Inflammation is known to be a risk factor for metabolic diseases. This study aimed to develop a Food-based Index of Dietary Inflammatory Potential (FBDI) and examine its association with metabolic biomarkers. SUBJECTS/METHODS: This study analyzed the raw data from the 2012-2014 Korean Genome and Epidemiology Study data of 17,771 people. To analyze the relationship between foods consumed by Koreans and inflammation, we conducted a correlation analysis between 51 food groups and hs-CRP levels. The FBDI was developed from 17 food groups selected by multiple regression method. We examined whether FBDI was associated with metabolic markers (waist circumference, blood pressure, fasting glucose, triglyceride, and HDL-cholesterol) in the 6th Korea National Health and Nutrition Examination Survey (KNHANES). We used binary logistic regression analysis to examine the association. RESULTS: The FBDI model included seven of the anti-inflammatory food groups and three of the pro-inflammatory food groups. The FBDI formula was calculated by multiplying the intake of food group by ${\beta}$-coefficients derived from the multiple regression model based on the correlation analysis. The FBDI was significantly associated with waist circumference (P < 0.001), blood pressure (P < 0.001), triglyceride level (P < 0.001), and HDL-cholesterol (P < 0.001) level among adults aged 20-64 years in the KNHANES. The prevalence of metabolic syndrome was 2.618 times higher in the group with the highest FBDI than in the group with the lowest one (95% confidence interval: 1.778-3.856, P for trend < 0.001). CONCLUSIONS: This study established an FBDI reflecting food intake patterns of Koreans, which showed a significant relationship with the prevalence of metabolic syndrome.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.49-56
• /
• 2019

In this paper, we deal with two pricing of bond options using the relationship between the forward rate model and the Libor rate model. First, we derive a formula for obtaining discounted bond prices using the restrictive condition of the Ritchken and Sankarasubramanian (RS), and then use the volatility function relationship of the forward rate and the Libor rate models to find the analytic solution (AS) of bond options pricing. Second, the price of the bond options is calculated by simulating several scenarios from the presented condition using Monte Carlo Simulation (MCS). Comparing the results of the implementation of the above two pricing methods, the relative error (RE) is obtained, which means the ratio of AS and MCS. From the results, we can confirm that the RE is around 3.9%, which means that the price of the bond options can be predicted very accurately using the MCS as well as AS.

• Steel and Composite Structures
• /
• v.50 no.3
• /
• pp.265-280
• /
• 2024

The collapse behavior observed in single-story beam-column assembly (SSBCA) do not accurately represent the actual overall stress characteristic of multi-story frame structure (MSFS) under column loss scenario owing to ignoring the interaction action among different stories, leading to a disconnection between the anti-collapse behaviors of "components" and "overall structures", that is, the anti-collapse performance of frame structures with two different structural scales has not yet formed a combined force. This paper conducts a numerical and theoretical study to explore the difference of the collapse behaviors of the SSBCA and MSFS, and further to reveal the internal force relationships and boundary constraints at beam ends of models SSBCA and MSFS. Based on the previous experimental tests, the corresponding refined numerical simulation models were established and verified, and comparative analysis on the resistant-collapse performance was carried out, based on the validated modeling methods with considering the actual boundary constraints, and the results illustrates that the collapse behaviors of the SSBCA and MSFS is not a simple multiple relationship. Through numerical simulation and theoretical analysis, the development laws of internal force in each story beam under different boundary constraints was clarified, and the coupling relationship between the bending moment at the most unfavorable section and axial force in the composite beam of different stories of multi story frames with weld cover-plated flange connections was obtained. In addition, considering the effect of the yield performance of adjacent columns on the anti-collapse bearing capacities of the SSBCA and MSFS during the large deformation stages, the calculation formula for the equivalent axial stiffness at the beam ends of each story were provided.