• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.387-390
• /
• 2003

Direct tensile tests were carried out for the tensile members of steel-reinforced polymer concrete with different steel diameters and steel ratios to figure out the effect of tensile strength of polymer concrete. In the experiments, polymer concrete with $1000kgf/cm^2$ of compressive strength, steel with $5200kgf/cm^2$ of tensile strength, and the tensile members with 100 cm of constant length were used. Experimental results showed that, regardless of steel diameters and steel content, the strain energy exerted by concrete till the initial crack was 14-15% of the total energy till the point of yield: The energy was much larger than the one of high-strength cement concrete. The behaviors of tensile members of steel-reinforced polymer concrete were in relatively good agreement with the model suggested by Gupta-Maestrini (1990), which was idealized by the effective tensile stress-strain relationship of concrete and the load-strain relationship of members, while those showed a big difference from CEB-FIP model and ACI-224 equation suggested for the load-displacement relationship that was defined as the cross sectional stiffness of effective axis. Modified ACI-224 model code about the load-displacement relationship for the tensile members of steel-reinforced polymer concrete and theoretical equation for the polymer concrete tensile stiffness of polymer concrete suggested through the results of this study are expected to be used in an accurate structural analysis and design for the polymer concrete structural members.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.24-33
• /
• 2000

This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$

• 한국지반환경공학회 논문집
• /
• 제11권7호
• /
• pp.33-43
• /
• 2010

한반도 남해안 부산지역의 해성점토에 대하여 물리적 특성을 사전 파악하고, 지반 강도정수의 상관성을 분석하기 위하여 비교적 신뢰성이 크다고 할 수 있는 대형 항만공사 자료를 활용하였다. 분석자료의 정도를 높이기 위하여 해성점토만을 대상으로 하였다. 통일분류법으로 ML, MH, CL, CH, ML-CL에 해당되는 자료는 분석대상에 포함하였으며, SC로 분류되는 자료는 분석대상에서 제외하였다. 지반강도 특성에 대한 분석은 일축압축시험, 삼축압축시험, 현장베인시험 결과에 의한 비배수 전단강도, 예민비, 유효마찰각에 대하여 분석하였으며, 자료분석시 통계분석을 통하여 이상치를 제거하였으며, 또한, 교란도분석을 수행하여 결과에 대한 신뢰성을 높이고자 하였다. 상관관계 분석에서는 선형회귀분석을 수행하여 깊이에 따른 비배수전단강도의 상관관계를 검토하였다. 또한, 동일한 위치에서 수행된 일축 및 삼축압축시험 자료를 분석하여 비배수전단강도의 상관관계식을 도출하였으며, 그 결과 심도와 비배수전단강도는 $S_u=0.015148D+0.04624$의 관계를 보이며, 삼축압축시험에서 구한 비배수 전단강도가 일축압축시험에서 구한 비배수전단강도의 1.26배 정도 크게 평가되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1065-1078
• /
• 2009

The shear strength has been managed as an important factor in soil mechanics. The shear strength estimation model was developed to evaluate the shear strength using only a few soil properties by the linear regression analysis model which is one of the statistical methods. The shear strength is divided into two part; one is the internal friction angle ($\Phi$) and the other is the cohesion (c). Therefore, some valid soil factors among the results of soil tests are selected through the correlation analysis using SPSS and then the model are formulated by the linear regression analysis based on the relationship between factors. Also, the developed model is compared with the result of direct shear test to prove the rationality of model. As the results of analysis about relationship between soil properties and shear strength, the internal friction angle is highly influenced by the void ratio and the dry unit weight and the cohesion is mainly influenced by the void ratio, the dry unit weight and the plastic index. Meanwhile, the shear strength estimated by the developed model is similar with that of the direct shear test. Therefore, the developed model may be used to estimate the shear strength of soils in the same condition of study area.

• 터널과지하공간
• /
• 제5권2호
• /
• pp.144-154
• /
• 1995

In this paper, we make a study on comparison and evaluation of the seoul granite properties, which are unit weight, uniaxial compressive strength, Brazilian tensile strength and, point load strength. The typical result are as follow- 1. From the measured value of point load strength anisotropy index, the seoul granite is considered to be homogeneous. 2. There is a linear relationship between uniaxial compressive strength and size corrected point load strength index. 3. Brazilian tensile strength and size corrected point load strength index are closely tied together.

• 정형스포츠물리치료학회지
• /
• 제14권2호
• /
• pp.25-32
• /
• 2018

Purpose: This study aimed to investigate the relationship between trunk control and pulmonary function and respiratory muscle strength in stroke patients. Methods: This study included 30 patients who had been clinically diagnosed with strokes, and trunk control abilities were measured using the trunk impairment scale (TIS). The subjects were classified into a group with high trunk control ability (TIS score ${\geq}20$) and a group with low trunk control ability (TIS score < 20). The patients' forced vital capacity (FVC), forced expiratory volume in one second (FEV1), peak expiratory flow (PEF), maximal inspiratory pressure (MIP), and maximal expiratory pressure (MEP) were measured. To compare the pulmonary function and respiratory muscle strength between the two groups, the measurement data were analyzed using an independent T-test, and the relationship between TIS and respiratory function was analyzed using a Pearson correlation. Results: The high trunk control ability group had significantly higher pulmonary function and respiratory muscle strength than the low trunk control ability group. Significant positive correlations were found between trunk control and FVC, FEV1, PEF, MIP, and MEP. Conclusions: This study demonstrated that trunk control affects pulmonary function and respiratory muscle strength in stroke patients.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.287-298
• /
• 2003

본 논문에서는 피에조콘 관입시험 결과로부터 점토의 비배수전단강도를 예측하기 위한 인공신경망 이론의 적용과 최적 모델 구축에 대하여 기술하였다. 먼저 등방 및 비등방 삼축압축실험(CIUC and CAUC)으로 얻어진 비배수전단강도 결과를 바탕으로 오차역전파 알고리즘에 의하여 간단한 다층 구조를 갖는 최적 인공신경망 모델이 구성되었다. 구성된 인공신경망 모델은 모델 구축 시에 사용되지 않은 새로운 자료에 대해 비배수전단강도 예측을 수행하고 예측결과와 실내시험 결과를 비교함으로써 그 타당성이 검증되었다. 또한 기존의 이론적 방법, 경험적 방법 및 direct correlation method 등으로 예측된 비배수전단강도와 제안된 모델의 예측결과를 비교하였다. 본 논문에서 제안된 인공신경망 모델링 기법은 피에조콘 관측결과들과 비배수전단강도 간의 비선형적 상관관계를 정의하는 데에 유용하며 구성된 인공신경망 모델은 기존의 이론적 및 경험적 방법들에 비하여 예측 신뢰성이 높은 것으로 나타났다. 또한, 지금까지 주로 사용되어 온 경험적 방법들이 특정 지역에 대한 상관관계에 만족하던 것과 비교해 인공신경망 모델은 다양한 지역과 국가에서 일반적으로 적용 가능한 상관관계로서 발전될 가능성이 있음을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1124-1131
• /
• 2008

Thanks to a new in-situ seismic probe, using bender elements and penetration scheme, a simple linear relationship between undrained shear strength(Cu) and shear wave velocity(Vs) was obtained. This priceless relationship is worthy to be illuminated further in ideal laboratory environment. To avoid sampling disturbance effect, special consolidation cylinders were used to make normally consolidated specimens from kaolinite suspension. The undrained shear strengths of the specimens were measured using unconsolidated undrained triaxial compression tests. Also shear wave velocity measurements were performedprior to shearing the same specimens, using the bender elements installed in the base pedestal and the top cap of the triaxial compression cell. The Cu-Vs relationship is fairly linear and supports the linear trend of clayey silt obtained using field testing. Also the classic density-shear modulus relationship for soft clay proposed by Hardin and Black(1969) was once more verified hereby.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.160-165
• /
• 1996

The tensile of concrete in one of important factor for study of reinforced concrete as well as prestressed concrete structures. In many countries, a numerous experimental studies are being undertaken to investigate correlation between compressive and tensile strength of concrete. This study is focused on identifying the relationship between the compressive strength and torsional tensile strength of concrete and, on crack of RC and PC structure.

• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.279-288
• /
• 2016

이 연구에서는 철근콘크리트(reinforced concrete, RC) 기둥의 휨 거동을 비교적 간단한 방법으로 평가하기 위해서 모멘트-곡률 관계를 단순화하였다. RC 기둥에서 주철근 배근을 이상화하고 힘의 평형조건 및 변형률 적합조건에 기반하여 초기 휨 균열 발생, 인장철근 항복 도달, 최대 내력 및 최대 내력 도달 후 최대 내력의 80% 시점에서의 내력과 중립축 깊이를 산정하였다. 기둥의 최대 내력 이후의 콘크리트 압축연단 변형률은 Kim et al의 구속된 콘크리트 응력-변형률 관계를 이용하여 산정하였다. 단순화된 모멘트-곡률 관계로부터 환산된 기둥의 횡하중-횡변위 관계는 다양한 변수하에서 수행한 기둥 실험결과와 잘 일치하였다. 고려된 각 단계에서의 모멘트와 중립축 깊이는 주철근 지수, 횡보강근 체적지수 및 축력 지수의 함수로 모델링하였다. 결국, 기둥의 곡률 연성은 콘크리트 압축강도 및 주철근과 횡보강근의 양과 함께 작용 축하중비에 중요한 영향을 받았다.