• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.929-932
• /
• 2008

기존 하수관거 비굴착 전체 보수 공법에서는 라이너 함침 재료로서 경제성 및 내구성, 내화학성이 우수한 불포화폴리에스터수지(UP) 또는 에폭시수지(Epoxy)가 일반적으로 사용된다. 하지만 불포화폴리에스터 또는 에폭시수지를 함침재료로서 현장에 적용하기 위해서는 공장에서 생산된 수 지함침 라이너를 냉각차($-5{\sim}5^{\circ}C$)로 현장까지 운반해야하는 불편함이 있다. 또한 현장시공에 있어 경화시간을 단축하기 위하여 온수 및 고온의 증기로 경화를 촉진시켜야 하며, 이로 인해 별도의 가열장치를 필요로 한다. 그러므로 현장에서의 함침이 가능하며 저온환경에서도 작업성이 우수하며 가사시간 조절이 가능하다면 보다 유리하게 작업을 진행할 수 있다. 따라서 본 연구에서는 저온경화성, 내약폼성, 내마모성 등이 뛰어난 것으로 알려진 MMA 모노머에 EPS를 각각 10, 20, 30%를 혼입하여 제작한 수지의 점도변화 및 가사시간 및 경화시간 등의 변화를 검토하여 하수관거 보수용 수지로서 적합한지를 검토하였다. 연구결과, 개시제 및 촉진제의 첨가량에 따라 가사시간 및 경화시간을 조절할 수 있었으며 하수관거 보수용 수지로서의 이용가능성을 확인할 수 있었다.

• 한국건축시공학회지
• /
• 제8권3호
• /
• pp.75-83
• /
• 2008

In this paper, concrete material tests were carried out to investigate influence of steel fiber volumn ratios on variations of workability and strength characteristics of steel fiber reinforced high-strength concrete, $50MPa{\sim}90MPa$ of compressive strength, according to increase of fiber volume. Test specimens were arranged with six levels of concrete compressive strength and fiber volumn ratios, 0.0%, 0.5%, 1.0%, 1.5%, 2.0%. The test results showed that steel fiber reinforced high-strength concrete($70MPa{\sim}90MPa$, 1.5% fiber volumn ratio) with good workability of slump 20cm could be used practically and effects of steel fiber reinforcement in improvement of concrete strength and toughness characteristics such as splitting tensile strength, flexural strength, and diagonal tensioned shear strength, were more distinguished in high-strength concrete than general strength concrete. And the test results indicated that splitting tensile strength of fiber reinforced concrete was proportioned to the product of steel fiber volumn ratios, $V_f(%)$ and sqare root of compressive strength, $\sqrt{f_{ck}}$, and the increasing rate was in contrast with that of flexural strength, and increase of diagonal tensioned shear strength was remarkable at steel fiber volumn ratio, 0.5%.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.397-407
• /
• 2013

교량 건설에 있어서 사용 재료의 개발과 새로운 형식을 개발하는 기술이 발달하였다. 그러나 대부분의 기술 개발은 현장 타설 및 재료비 절감을 위한 공법에 치중하고 있다. 이러한 현장 타설의 경우 주변 환경 피해와 주변 민원을 야기할 뿐만 아니라 날씨에 큰 영향을 받는 단점을 가지고 있다. 이러한 단점을 극복하기 위해서 공기 단축을 위한 공법 개발이 증대되고 있는 실정이다. 이 방법이 조립식 공법이다. 대부분의 조립식 건설공법은 상부구조에 위주이며, 이에 반해서 하부구조는 매우 미미하다. 선행 연구자들은 내부 구속 중공 CFT 기둥을 이용하여 조립식 기둥을 제시하였으며, 상세 요소로 기둥 세그먼트 접합부, 기초접합부, 기둥-코핑 접합부, 조립식 코핑부가 개발되어졌다. 본 연구에서는 기존에 개발된 방법을 적용하여 조립식 ICH CFT 모델의 실험체를 제작하여 내진성능을 분석하였다. 실험체는 기둥 접합방법에 따라서 몰탈주입법과 보강재 보강법으로 2개가 제작되었으며, 실험 모델이 지진 하중을 받을 경우의 파괴 및 거동 특성을 다양한 방법으로 분석하였다.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.163-182
• /
• 2020

Coupled thermo-mechanical analysis of reinforced concrete slab at elevated temperatures from a fire accounting for nonlinear thermal parameters is carried out. The main focus of the paper is put on a one-way continuous reinforced concrete slab exposed to fire from the single (bottom) side as the most typical working condition under fire loading. Although contemporary techniques alongside the fire protection measures are in constant development, in most cases it is not possible to avoid the material deterioration particularly nearby the exposed surface from a fire. Thereby the structural fire resistance of reinforced concrete slabs is mostly influenced by a relative distance between reinforcement and the exposed surface. A parametric study with variable concrete cover ranging from 15 mm to 35 mm is performed. As the first part of a one-way coupled thermo-mechanical analysis, transient nonlinear heat transfer analysis is performed by applying the net heat flux on the exposed surface. The solution of proposed heat analysis is obtained at certain time steps of interest by α-method using the explicit Euler time-integration scheme. Spatial discretization is done by the finite element method using a 1D 2-noded truss element with the temperature nodal values as unknowns. The obtained results in terms of temperature field inside the element are compared with available numerical and experimental results. A high level of agreement can be observed, implying the proposed model capable of describing the temperature field during a fire. Accompanying thermal analysis, mechanical analysis is performed in two ways. Firstly, using the guidelines given in Eurocode 2 - Part 1-2 resulting in the fire resistance rating for the aforementioned concrete cover values. The second way is a fully numerical coupled analysis carried out in general-purpose finite element software DIANA FEA. Both approaches indicate structural fire behavior similar to those observed in large-scale fire tests.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.207-213
• /
• 2020

Umbrella Arch Method (UAM) often employed in the tunnel construction under poor rock mass conditions in Korea. Insertion of steel pipes at the periphery of the tunnel and infiltration of grouts along the pipes into the rock masses increases tunnel stability. There are two major effects of grouts expected at the tunnel face: 1) increase of face stability by enhancing the frictional resistance of discontinuities and 2) decrease of permeability along the rock masses. Increase of resistance and decrease of permeability requires a certain curing time for the grout. In Korea, we require 24 hours for curing of grout, which means no progress of excavation for 24 hours after infiltration of grouts. This step delays the tunnel construction sequences. To eliminate such inefficiency, we propose MTG (Method for Tunnel construction using Grouting technology), which uses extended length of steel pipes (14 m) compared to conventional pipe roof method (12 m). The merit of MTG is the reduction of curing time. Because of the approximately 2 m extension of the length of steel pipe, blasting can be done after infiltration of grouting. For this paper, we conducted experiments on the shear strength behaviors of grout infilled rock joint with elapsing of curing time and blasting induced vibration. The results show that blasting induced vibration under MTG does not influence the mechanical features of grout material, which indicates no influence on the mechanical behaviors of grout, contributing to the stability of tunnels during excavation. This result indicates that MTG is a cost effective and fast construction method for tunneling in Korea.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.322-326
• /
• 2003

Dae-gu subway accident raise whole points in connection with safety facilities and operating of national urban transit system like rolling stocks, facilities, management of human. Rolling stock is made every effort for improvement of performance, guarantee of comfortableness, insurance of economical efficiency. But Security like safety of fire is not thoroughgoing enough. Especially, interior material has used although it is not prove its degree of safety. it is a main cause of Dae-gu subway accident. Safety regulation of urban transit vehicle that legislate for security in March 2000 does not applied manufacturing vehicles before in 2000. It has be prescribed in the regulations that incombustibles must be used. But detailed test standard related with incombustibles is not prescribe. Thus that regulation be required reinforcement of detailed test standard. Main cause of Dae-Gu subway accident is a fire in vehicle. However, many defects are found in infrastructure and operating vehicle of urban transit, such as inexperienced disposal of driver and CCC in early stage of the fire accident, unskilled opening and closing doors, insufficient escape facilities and safety facilities of a station house and tunnel, and incomplete communication system between vehicle and CTC, extraordinary step. Thus the aims of this study are prevention of urban transit accident, improvement plan of safety driving, and proposal of quick action plan through analysis of total faculty of vehicle.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.91-105
• /
• 2016

One of the most commonly used techniques to strengthen steel reinforced concrete structures is the application of externally bonded patches in the form of carbon fiber reinforced polymers (CFRP) or recently, textile reinforced cements (TRC). These external patches undertake the tensile stress of bending constraining concrete cracking. Development of full-field inspection methodologies for fracture monitoring are important since the reinforcing layers are not transparent, hindering visual observation of the material condition underneath. In the present study acoustic emission (AE) and digital image correlation (DIC) are applied during four-point bending tests of large beams to follow the damage accumulation. AE helps to determine the onset of fracture as well as the different damage mechanisms through the registered shifts in AE rate, location of active sources and change in waveform parameters. The effect of wave propagation distance, which in large components and in-situ can well mask the original information as emitted by the fracture incidents is also discussed. Simultaneously, crucial information is supplied by DIC concerning the moments of stress release of the patches due to debonding, benchmarking the trends monitored by AE. From the point of view of mechanics, conclusions on the reinforcing contribution of the different repair methodologies are also drawn.

• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.97-107
• /
• 2017

최근 도심지에서 지반함몰이 많이 발생하고 있으며 복구작업시 현장 주변 통제로 매우 복잡하고 불편하고 복구대책 공법으로 그라우팅 및 흙메우기 공법이 적용되고 있지만 지반 내 지하수위의 존재 및 공동상태에 따라 재료분리 현상이 발생하거나 많은 양의 복구재료가 요구되는 경우가 많고 지하수의 흐름에 따라 지반 내에서 유실되는 경우도 발생하고 있어 본 연구는 도심지에서 지반함몰이 발생하고 신속하게 복구하는 것을 목표로 지반공동의 긴급보강을 위해 비개착식 공법에 적용할 파우치형 충전재를 개발하는 것으로 지하수의 온도에 따라 충전재의 압축강도 및 팽창비가 다른 것과, 알루미나 파우더의 혼합을 통해 압축강도와 팽창률을 조절할 수 있음을 확인했다.

• 대한족부족관절학회지
• /
• 제5권1호
• /
• pp.5-12
• /
• 2001

Purpose: To find out the priority of which procedure has had a better outcome both clinically and radiographically between the two groups, one is treated by primary repair and the other by modified Brostr$\ddot{o}$m's procedure, by comparing the postoperative ankle joint stability and the patient's degree of satisfaction. Material and methods: 16 cases were taken into consideration whose number of severed ligaments were at least two or more of the lateral collateral ligaments of the ankle, and also were confirmed intraoperatively. Among them, 8 cases were treated with primary repair and the other 8 cases were treated with primary repair and the other 8 cases by modified Brostr$\ddot{o}$m's procedure. Results: There was no distinguishable difference for the patient's degree of satisfaction between the two procedures above mentioned. In 3 cases treated with primary repair, functional instability was observed. In case of postoperative ankle joint stability, 7 of 8 cases treated by modified Brostr$\ddot{o}$m's procedure has revealed increased joint stability. And 3 of 8 cases which were treated by primary repair have showed postoperative residual instability. Conclusion: Actually, the severed ligament can not maintain its normal strength though several months has elapsed, and possible residual instability could be remained. Therefore, it can be expected that modified Brostr$\ddot{o}$m's procedure also would be a .good method in obtaining suitable ankle joint stability as well as subtalar joint stability because of its reinforcement using extensor retinaculum.

• Carbon letters
• /
• 제18권
• /
• pp.18-23
• /
• 2016

Polyacrylonitrile (PAN)-based carbon fibers have high specific strength, elastic modulus, thermal resistance, and thermal conductivity. Due to these properties, they have been increasingly widely used in various spheres including leisure, aviation, aerospace, military, and energy applications. However, if exposed to air at high temperatures, they are oxidized, thus weakening the properties of carbon fibers and carbon composite materials. As such, it is important to understand the oxidation reactions of carbon fibers, which are often used as a reinforcement for composite materials. PAN-based carbon fibers T300 and T700 were isothermally oxidized in air, and microstructural changes caused by oxidation reactions were examined. The results showed a decrease in the rate of oxidation with increasing burn-off for both T300 and T700 fibers. The rate of oxidation of T300 fibers was two times faster than that of T700 fibers. The diameter of T700 fibers decreased linearly with increasing burn-off. The diameter of T300 also decreased with increasing burn-off but at slower rates over time. Cross-sectional observations after oxidation reactions revealed hollow cores in the longitudinal direction for both T300 and T700 fibers. The formation of hollow cores after oxidation can be traced to differences in the fabrication process such as the starting material and final heat treatment temperature.