• 한국구조물진단유지관리공학회 논문집
• /
• 제7권2호
• /
• pp.239-246
• /
• 2003

In the PCA Load Contour Method, the biaxial bending design coefficient of columns(${\beta}$) is based on the equivalent rectangular stress block (RSB). And coefficient of ${\beta}$ estimates the reinforcement index to be a influencing parameter on biaxial moment strength of RC columns without considering the arbitrary condition of bar arrangement. The experimental results of high strength concrete (HSC) columns subjected to combined axial load and biaxial bending moment were compared to the analysis results of RSB method. As result, the accuracy of RSB method is still acceptable for HSC columns and, as the reinforcement is placed densely in each corner of column section, the ${\beta}$ is decreased.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.143-144
• /
• 2016

The core drilling method is considered to be the most effective and common method of assessing the compressive strength of concrete in existing reinforced concrete buildings for structural repair and retrofit. In general, core specimens within reinforcing bars are not permitted in the regulations with regard to assessing concrete strength even if the core specimens can contain the bars in some cases. The purpose of this study is to investigate the effects of the reinforcement arrangement on the concrete compressive strength as a basic research to propose the quantitative criteria of strength for core specimens containing reinforcements. To complete the basic research, cylinder specimens inserted in a variety of reinforcement arrangements were prepared and tested.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.521-526
• /
• 2002

The seismic performance of structural walls subjected to the cyclic lateral loads are influenced by various factors, like sectional shape, aspect ratio, reinforcement ratio, arrangement of reinforcement, and axial load ratio etc. In this research, reinforced concrete structural walls with the T-shaped cross section were selected. The seismic performance of T-shaped wall was affected by the many (actors because T-shaped wall is irregular wall composed to two rectangular walls. Especially the seismic performance of T-shaped wall varies with the flange condition and the various factors including the flange condition were determined. Therefore, the objective of this study is to understand the factors to improve seismic performance of RC T-shaded tv using sectional analysis.

• Structural Engineering and Mechanics
• /
• 제12권4호
• /
• pp.397-408
• /
• 2001

Bolted connections are used commonly in the precast reinforced concrete structures. In such structures, to perform structural analysis, behaviour of connections must be determined. In this study, elastic rotation stiffness of semi-rigid bolted beam connections, applied in industrial precast structures, are determined by finite element methods. The results obtained from numerical solutions are compared with an experimental study carried out for the same connections. Furthermore, stress distributions of the connection zone are determined and a reinforcement scheme is proposed. Thus, a more appropriate reinforcement arrangement for the connection zone is enabled. The connection joint of the prefabricated frame is described as rigid, hinged or elastic, and a static analysis of the frame system is performed for each case. Values of bending moments and displacements obtained from the three solutions are compared and the effects of elastic connection are discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.202-205
• /
• 2003

The purpose of this experimental study is to understand the flexural Behavior of structural deck plate continuous slabs (power deck plate slabs). The main variables considered in this test are thickness of the slab and the deck plate. Five specimens that have length of 600cm and width of 60cm were manufactured. Test results indicated that the ultimate flexural strength of power deck plate slabs was conservative compared to ACI flexural provisions. But, suitable arrangement of bar of top reinforcement is needed for crack control.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.219-224
• /
• 1999

In this study New design automation method of R/C structure based on the finite element method and the analogy evolution ary procedure was developed . This system is the efficient tool to support Reinforcement Arrangement of R/C structure. The anology evolutionary procecure is similar to the evolutionary procedure proposed by Xie and Steven.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1179-1185
• /
• 2007

본 논문은 슬래브내의 보 상부철근의 영향을 파악하기 위한 해석적 연구로 슬래브가 있는 보-기둥 접합부에서 기존의 설계방법인 직사각형 단면 내에 상부철근을 2단으로 배근한 보와 동일량의 상부철근을 직사각형 단면에 1단만 배근하고 나머지는 보의 적정 플랜지폭 내에 분산 배치하여 상부철근의 배치에 따라 보의 휨 강도가 어떻게 변화하는지를 정량적으로 평가할 수 있도록 하는 것이다. 이러한 연구 목적을 수행하기 위하여 상용화된 범용 구조해석 프로그램인 ANSYS를 이용하여 모델링하고, 비선형 구조해석을 실시하였다. 플랜지폭, 플랜지(슬래브)두께 및 상부 플랜지내에서의 철근의 위치 등을 변수로 한 수치해석을 통하여 보의 최대내력을 비교 검토한 결과, 플랜지폭의 영향은 상부 인장철근을 1단으로 직사각형 단면에서 멀리 배치할수록 내력차이가 증가하는 것을 확인하였으며, 플랜지폭이 동일한 계열에서 내력이 증가되는 비율은 플랜지두께의 영향을 크게 받지 않는 것으로 나타났고, 상부 인장철근의 위치에 따른 내력은 슬래브두께가 증가할수록 내력의 차이가 줄어드는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.1-9
• /
• 2017

원형 기둥의 나선철근은 축방향 철근의 위치 고정 및 좌굴방지와 코어콘크리트의 충분한 횡구속으로 기둥의 연성거동에 효과적인 역할을 한다. 각국은 기둥에 요구되는 연성을 확보하기 위하여 나선철근의 최소철근비를 제시하고 있다. ACI 318-14와 국내 콘크리트 구조설계 기준에서 제시하는 나선철근 최소철근비는 Richart et al.(1928)의 이론에 기초하여 개발되었으며 현재까지 사용되고 있다. 그러나 Richart et al.(1928)의 이론은 현대의 고강도 콘크리트, 고강도철근 그리고 나선철근의 배근조건 등의 영향을 고려하지 못한다. 이 연구에서는 나선철근으로 구속된 철근콘크리트 원형 기둥의 내력회복 및 연성증진에 요구되는 나선철근에 대한 수정 최소철근비 산정식을 제시한다. 수정 최소철근비 산정식은 콘크리트 압축강도, 나선철근 항복강도, 기둥의 단면적, 나선철근 배근간격, 나선철근 직경의 영향을 고려하고 있다. 이 논문에서는 재료강도 및 나선철근 최적비를 변수로 한 실험체의 일축 압축실험을 통하여 ACI 318-14에 제시하는 나선철근 최소철근비 산정식의 타당성을 검토하고, 그 결과를 토대로 나선철근 최소철근비 산정식의 수정방안을 고찰하였다.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.329-336
• /
• 2010

이 논문에서는 경간장이 30 m인 표준 PSC I 거더의 정착부 거동을 평가하기 위한 실험적 연구를 수행하였다. 현재 사용되고 있는 표준 PSC I 거더의 정착부 파열보강철근은 텐던 긴장으로 인한 단부 콘크리트의 응력흐름을 정확히 반영하지 못 한 채 설계되었고, 과대보강으로 인해 콘크리트 타설 시 작업성이 크게 떨어지고 있는 실정이다. 따라서 이 논문에서는 표준 PSC I 거더와 동일한 단면을 갖는 실험체 3개를 제작하여 인장실험을 수행하였다. 각 실험체의 파열보강철근은 100 mm, 200 mm, 300 mm 간격의 격자형으로 배근되었다. 실험결과, 파열균열 긴장력은 모든 실험체에서 설계 긴장력의 1.6배 내외로 나타났고, 파열균열은 정착단부 내부에서 수직방향으로 발생하였다. 또한 설계 긴장력의 2.7배까지 긴장력을 도입한 결과, 파열보강철근 간격이 300 mm인 실험체의 일부 수평방향 파열보강철근만 항복되었다. 따라서 표준 PSC I 거더의 정착부 파열보강철근은 도로교설계기준에서 제한하고 있는 최대 간격 300 mm를 만족시키는 것만으로도 파열력에 대한 안전성을 충분히 확보할 수 있음을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제28권2호
• /
• pp.127-136
• /
• 2003

The top-to-bottom compression strength of corrugated board box is the most important mode of loading during it's no, and it depends largely on the edgewise compression strength of the corrugated board in the cross-machine direction and to a considerable extent on the flexural stiffness in both principal directions (CD; cross-machine direction, MD; machine direction) of the corrugated board. Corrugated board is a sandwich structure with an orthotropic property. The purpose of this study was to elucidate the principal design parameters for board combination of corrugated board from the viewpoint of bending strength through the finite element analysis [FEA] fur the various corrugated board. In general, the flexural stiffness [FS] in the MD was 2-3 times larger than that in the CD, and the effect of liner for the FS of corrugated board was much bigger than that of corrugating medium. The flexural stiffness index [FSI] was high when the stiffness of liner was in the order of inner, outer, and middle liner in double-wall corrugated board [DW], and the effect of the stiffness arrangement or itself reinforcement of corrugating medium on the FSI was not high. In single-wall corrugated board [SW] with DW. the variation of FSI with itself stiffness reinforcement of liner was much bigger than that with stiffness arrangement of liner. The highest FSI was at the ratio of about 2:1:2 for basis weight distribution of outer, middle, and inner liner if the stiffness of liner and total basis weight of corrugated board were equal in DW Secondarily. basis weight was in the order of inner, outer, and middle liner. However, the variation of FSI with basis weight distribution between liner and corrugating medium was much bigger than that with itself basis weight distribution ratio of liner and corrugating medium respectively in both DW and SW. md the FSI was high as more total basis weight was divided into liner. These phenomena fur board combination of corrugated board based on the FEA were well verified by experimental investigation.