• 제목/요약/키워드: Reinforcement Detail

검색결과 159건 처리시간 0.035초

보강상세 적용에 따른 강바닥판 피로강도 향상에 관한 해석적 연구 (Analytical Study on the Improvement of Fatigue Strength for the Orthotropic Steel Decks with Reinforced Structural Details)

  • 경갑수;박경진;김교훈;박혜연
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2007년도 정기 학술대회 논문집
    • /
    • pp.839-844
    • /
    • 2007
  • In order to reduce resultant stress of the connection detail of longitudinal and rib and floor beam, in this study, the parameter studies for the reinforcement details as the bulk head and the vertical rib were preformed with FE analysis. As the result, it was shown that reinforcement detail with the bulk head plate in longitudinal rig reduced generally the principal stress at the connection detail, but the stress concentration of the weld toe parts occurring fatigue crack increased. However, it was known that the reinforcement detail with the vertical rib in the rib is more effective than the bulk head plate of the reduction stress concentration in the weld toe parts.

  • PDF

KBC 2009와 KBC 2005의 내진철근상세 비교 (Seismic Reinforcement Detail Comparison of KBC 2009 and KBC 2005)

  • 이현호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.173-174
    • /
    • 2010
  • 2009년 개정된 KBC 2009는 기존의 KBC 2005를 개정한 것으로, 특수모멘트 골조의 도입 등 새로운 내진배근상세 등이 도입되었지만, 이에 대한 검토 및 배근상세가 부족한 것으로 판단된다. 이에 본 연구에서는 KBC 2009 및 2005기준의 내진상세를 표와 그림으로 비교하여, 실무 적용시 발생될 수 있는 문제점을 개선하였다.

  • PDF

기존 철근콘크리트 교각의 내진성평가 (Seismic Evaluation of the Existing RC Piers)

  • 전귀현;이지훈
    • 한국지진공학회논문집
    • /
    • 제2권4호
    • /
    • pp.155-168
    • /
    • 1998
  • 본 연구에서는 국내기존 철근콘크리트(RC) 교각의 구조적 특성을 조사.분석하여 단면강도와 변형성능에 미치는 영향을 규명하였으며 이와같은 특성을 고려한 내진성평가절차를 제시하였다 기존 RC교각의 내진성평가를 위해서는 단면휨강도를 지배하는 구요소인 작용축력과 주철근비 및 주철근강도 주철근 항복후 부재변형성능과 전단강도를 지배하는 횡철근비 및 앵커상세 그리고 주철근 부착파괴를 결정하는 주철근의 이음부위치에 대한 상세조사가 요구된다. 국내기존 RC교각은 대부분 횡철근의 앵커가 부적절하고 주철근의 위치가 소성힌지부에 위치하고 있으므로 휨연성거동을 위한 변형성능이 충분히 확보되어있지 못하다 따라서 여기서 제시된 평가절차는 기존 연속교 고정단교각의 내진성평가를 수행하고 그에 따른 적절한 내진보강을 하여 지진에 대한 안전성확보 하는 데 도움이 될 것으로 판단된다.

  • PDF

완화된 단부 배근상세를 갖는 특수전단벽 구조시스템의 내진성능평가 (Seismic Performance of Special Shear Wall Structural System with Effectively Reduced Reinforcement Detail)

  • 천영수;이기학;이효원;박영은;송진규
    • 콘크리트학회논문집
    • /
    • 제25권3호
    • /
    • pp.271-281
    • /
    • 2013
  • 구조형식별로 구조물의 안정성 확보를 위해 KBC2009에 새로이 도입된 높이제한에 따라, 내진설계범주D에 해당되는 60 m 이상의 RC 구조물을 계획할 경우 특수전단벽을 의무적으로 사용해야 한다. 그러나 특수전단벽의 엄격한 횡보강 배근상세는 시공성 및 경제성에 부정적 영향을 미칠 것으로 예상된다. 그래서 이 연구에서는 현 규준에 따른 특수전단벽보다 완화된 배근 상세를 갖는 특수전단벽을 제안하고, 특수전단벽과의 성능 비교를 위하여 각각 두 개의 실험체를 제작하고 횡방향 반복 하중실험을 실시하였다. 또한 그 실험 결과를 반영한 보통전단벽, 특수전단벽, 완화된 특수전단벽 구조시스템의 해석모델을 설계하여 FEMA P695에 따른 방법론으로 내진성능평가를 실시하였다.

철근콘크리트 기둥과 철골 보 합성구조 접합부 시스템 개발 (Development of Reinforced Concrete Column and Steel Beam Composite Joints)

  • 김도균;정하선;최완철
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.691-698
    • /
    • 2001
  • Recent trends in the construction of long span or tall building frames feature the increase use of composite members that steel and concrete is functioning together in what terms of mixed structural systems. One of such systems, RCS (reinforced concrete column and steel beam) system is introduced and closely examined focusing on bearing strength of the composite joint in this paper. The main objective of this study was to develope detail to increase bearing capacity while bearing failure is one of the two primary modes of failure in RCS system. The results show that specimens with the U-type bearing reinforcement detail developed in this study enhanced the bearing strength by 1.20-1.50. The U-type reinforcement is the effective details to increase joint bearing strength compared to others like vertical reinforcement welded to beam flanges.

  • PDF

경계요소 횡보강근의 상세와 배근간격에 따른 특수전단벽의 내진성능 (Seismic Performance of Special Shear Wall with the Different Hoop Reinforcement Detail and Spacing in the Boundary Element)

  • 천영수
    • 토지주택연구
    • /
    • 제6권1호
    • /
    • pp.11-19
    • /
    • 2015
  • 이 논문에서는 최근 강화된 내진규정에 의하여 현장에서 시공에 어려움을 겪고 있는 특수전단벽의 배근상세를 완화할 목적으로 제안된 경계요소 횡보강상세에 대하여 횡보강근의 형태와 배근간격에 따른 실험결과를 제시하고 있다. 실험결과, 제안된 횡보강 상세를 채용한 실험체의 균열 및 파괴양상은 폐쇄형 후프를 사용한 실험체와 유사한 경향을 나타내었으며, 최대강도도 예상값을 모두 상회하는 것으로 나타났다. 또한, 에너지 소산능력을 비교한 결과, 완화된 배근상세를 따르는 실험체(SSWR2)의 경우 기존 설계기준의 특수전단벽 실험체(SSW2)와 유사한 내진성능을 가지고 있는 것으로 나타났으며, 설계기준에서 제시하고 있는 1.5% 수준의 변형각 조건을 충분히 만족하고 있어 구조물의 주요 횡력저항 요소로서 사용될 수 있을 것으로 판단된다.

철근콘크리트 기둥의 띠철근에서 135° 갈고리 대체 클립형 연결장치의 시공성 및 비용 분석 (Constructability and Cost Analysis of the Clip-Type Binding Implement Substituting 135° End-Hooked Transverse Reinforcement in Reinforced Concrete Columns)

  • 박경언;윤현도
    • 한국건축시공학회지
    • /
    • 제20권5호
    • /
    • pp.459-469
    • /
    • 2020
  • 이 연구의 목적은 철근콘크리트 기둥에서 띠철근 상세로 이용되는 갈고리 양단 135° 교차시공에 대해 동등이상의 구조적 성능을 확보하면서, 동시에 시공성을 개선할 목적으로 클립형 연결장치를 이용하여 90° 갈고리 띠철근에 결속하는 방법을 제시하였으며, 제안한 클립형 연결장치에 따른 시공성 평가 및 소요비용을 분석하였다. 분석 결과, 기둥 1개 전체 철근 조립하는 데 작업 시간은 클립형 연결장치 사용시 50%의 작업시간을 단축하는 것으로 나타났으며, 비용분석 결과 클립형 연결장치 1개 사용시 절감효과가 가장 효과적이었고, 표준 갈고리 상세 대비 약 32%의 비용 절감효과가 있는 것으로 분석되었다.

고성능 섬유 보강 시멘트 복합체(HPFRCC)를 적용한 세장한 연결보의 내진거동 평가 (Seismic Behavior of Slender Coupling Beams Constructed with High-Performance Fiber Reinforced Cementitious Composite)

  • 한상환;권현욱;신명수;이기학;조영욱
    • 한국지진공학회논문집
    • /
    • 제17권6호
    • /
    • pp.271-278
    • /
    • 2013
  • The hysteretic behavior of diagonal reinforced coupling beams is excellent during earthquakes. However, construction of the diagonal reinforced coupling beams is difficult due to complex reinforcement details required by current code procedures (ACI 318-11). Due to the detail requirement, reinforcement congestion and interference among transverse reinforcement always occur during construction field. When the aspect ratio of the beam is large, the interference of reinforcement becomes more serious. The objective of this paper is to simplify the reinforcement details of slender coupling beams by reducing transverse reinforcement around the beam perimeter. For this purpose, high- performance fiber reinforced cementitious composites are used for making coupling beams. Experiments were conducted using three specimens having aspect ratio 3.5. Test results showed that HPFRCC coupling beams with half the transverse reinforcement required by ACI 318-11 provided identical seismic capacities to the corresponding coupling beams having requirement satisfying the requirement specified in ACI 318-11.

반복하중을 받는 철근콘크리트 보의 소성힌지 이동에 관한 실험적 연구 (An Experimental Study on the Relocating Plastic Hinging Zones of Reinforced Concrete Beams Subjected to Cyclic Loads)

  • 김윤일;최창식;천영수;이리형
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1989년도 가을 학술발표회 논문집
    • /
    • pp.77-82
    • /
    • 1989
  • In this paper an experimental approach of the relocation plastic hinging zones of nine reinforced concrete exterior beam-column subassemblages under cyclic loads was tried. The main parameters of the testing program were location of the plastic hinge, difference of the special reinforcement, inclined or intermediate layers of longitudinal reinforcement, applied maximum shear stress. The conclusions presented herein are based on the limited texts conducted. Inclined or intermediate layers of longitudinal reinforcement and extra top and bottom steel in the beam over a specific legnth can be used to move the beam plastic hinging zone away from the column face. But, for the use of intermediate layers of longitudinal reinforcement, sheat reinforcement detail need further investigation.

  • PDF

보강토 옹벽 축조시 사용되는 보강재의 강성이 시공완료후 보강토 옹벽 구조체의 거동에 미치는 영향 (Analysis on the behavior of Stiffened Reinforcement within Reinforced earth retaining wall)

  • 박병영;유충식
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 토목섬유기술위원회 학술세미나 논문집
    • /
    • pp.1-11
    • /
    • 2001
  • This Paper presents the result of a parametric study on the behavior of stiffened grid reinforced segmental wall resting on non-yielding foundation. The parametric study was conducted using the nonlinear finite element analysis. In the finite element analysis, the step by step construction of the wall such as backfill, block reinforcement, block/backfill and soil/reinforcement interfaces were carefully modeled. The mechanical behavior of stiffened grid reinforced segmental walls was then investigated based on the result of analysis with emphasis on the effect of reinforcement stiffness on the behavior of the wall. The results of analysis indicate that the horizontal wall displacement decrease; with increasing the reinforcement stiffness at a decreasing rate, and that the horizontal stress at the back of the reinforced soil block does not much vary with the reinforcement stiffness. It is also revealed that the calculated maximum vertical stress at the base of the reinforced soil block agrees well with that based on the Meyerhof distribution and that the reinforcement and the connection force are considerably smaller than what might be expected based on the current design assumptions. The implications of the findings from this study to current design approaches were discussed in detail.

  • PDF