• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.390-395
• /
• 2019

Hydrogymnastics so that sufficient exercise effect can be obtained using the resistance of water has a positive effect on patients who have to receive arthritis or rehabilitation treatment. However, the studies on the effect are insufficient, and the main cause of their effects has not been unclear yet. In this study, in order to identify the main cause of the effects of Hydrogymnastics, conducted Unsteady fluid flow simulation under the same conditions as the actual environment. The analysis model based on real hands, and the pressure fluctuation applied to the knuckle was analyzed by the computational fluid method. During the underwater movement of the hands, Various sizes of vortices were generated between fingers due to skin surface velocity and flow resistance. Pressure of about -500 Pa to +500 Pa is applied by the vortex flow. Also It was confirmed that the positive pressure and the negative pressure were continuously repeated up to maximum + 2000 Pa at the minimum of -2000 Pa at the portion where the direction was changed. Pressure fluctuations with a frequency of 20 Hz to 70 Hz were added continuously for each knuckle. These continuous pressure fluctuations provide a direct massage effect on the knuckles, an It is judged that the blood circulation at the relevant part is positively affected.

• 재활복지
• /
• v.18 no.4
• /
• pp.221-235
• /
• 2014

Recently, the frequency of stroke disease is increased due to the rapid aging population, and is contributed to the major occurrence factors of the posteriori acquired disability. This study is about an postural change device for the control of supine posture which is an assisted equipment using in daily rehabilitation process for overcoming the disability by the aftereffects of the stoke disease. In this paper, the existing domestic and Japan postural appliances is examined and its comparison and categorization is performed according to its functions and purposes. Here, in order to control the supine posture state, the design method for advanced multi functional system is proposed, which is devised to have an unified mattress control operations of combining the bedsore prevention tube with the supine posture tilting tube. And also, in addition of an smart function, it is designed to enable to perform an RF functions such as the monitoring of the present device state, the alteration of the basic position and the control of alternative floating and supine posture. This system control hardware consists of three main parts : the sensor detection part, the motor driving /control part, and the system control part for bluetooth communication. In results, we confirmed that the system designed by this research is possible to make it practical as an advanced smart postural change device combined by IoT technology in the application field of the recent IT technology.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.367-374
• /
• 2017

The aim of this study was to evaluate the quality characteristics, antioxidant activities, and sensory properties of macaron with cabbage powder (CP). Physicochemical and sensory properties of macaron with different amounts (0%, 1%, 3%, 5%, and 7%) of CP were examined. The quality of macarons was evaluated based on spread factor, baking loss rate, color, texture, antioxidant activities, and sensory evaluation. As amount of CP addition increased, spread factor, baking loss rate, and L and a values decreased, whereas b value increased (p<0.05). For texture properties, hardness, cohesiveness, and springiness were increased by addition of CP (p<0.05). The gumminess and brittleness did not show significant changes up to 3% CP addition although significant changes in 5-7% CP addition (p<0.05) were evident. The total polyphenolic contents, DPPH radical scavenging activities, and reducing power were significantly increased by addition of CP at high concentrations (p<0.05). In the consumer acceptance of macarons, 3% CP showed the highest in color, flavor, texture, and overall acceptance and 5% CP showed the highest in taste. Meanwhile, macaron containing 7% CP showed the lowest scores in texture and overall acceptance (p<0.05). These data suggested that adding 3% of CP was the optimal concentration for making macaron.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.1
• /
• pp.7-17
• /
• 2021

Objective : The purpose of this study was to quantitatively analyze the quantitative changes in, and the status of, overseas occupational therapy using text mining. Methods : Using PubMed, research papers on Elderly, Health and Occupational therapy published between 2009 and 2019 were selected for analysis, Abstracts of the selected papers were analyzed. The number of annual papers, the key words, the key words by year, and the relationship between the words were analyzed. Results : The number of papers published from 2009 to 2019 was 9,941, there was a gradual increase from 2009 to the highest in 2017 or 2018, followed by a decreasing trend in 2019. Within the last five years, the most frequent words were Care, Group, Intervention, Pain, Treatment, and Work. There was a strong relationship between the words based on the average frequency over the last 11 years, function, health, event, and partition. Conclusion : This study is meaningful because it applied a new research method called text mining to the empirical and systematic analysis of trends in occupational therapy and presented macroscopic and comprehensive results. The findings are expected to help establish new research directions at clinical and research sites for occupational therapy related to older adults.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.20 no.1
• /
• pp.15-67
• /
• 2020

Objective : The purpose of this study is to identify the trends of vibration(or wave) therapy in Korea, to actively utilize vibration(or wave) therapy, and to help research activities of vibration therapy in Korean Medicine. Methods : The following Korean words "진동기", "진동요법", "진동운동", "진동치료", "파동요법", "파동운동", "파동치료" were searched on three specialized search sites (RISS, NAL, DBpia). Trends of vibration therapy were analyzed through the selected researches suitable for this study among these searched researches in an overview format. Results : 1. A total of 8,116 studies were searched and a total of 365 studies were finally selected 2. From 2000 to 2019, when research began to increase in earnest, there were 17.45±10.28 studies per year, and the AGR(Average Annual Growth Rate) was 11.92%. 3. In the main field of research, the 'Medicine and Pharmacy' was the largest with 147(40.16%) studies. In the Middle Field, the 'Kinesiology' was the largest with 99(27.05%) studies. In the study design, 'RCT(Randomized Controlled trial)' was the largest with 138(47.75%) studies. In the Age Group, 'Youth' was the largest with 126(48.84%) studies. 4. The average of the number of participants was 24.90±17.44. 5. The most used Intervention was the 'WBV(Whole Body Vibration)' with 177(61.25%) studies. 6. The average of Intervention Period was 5.99±4.14 weeks, while the maximum was 36 weeks. 7. The journal that published the most research papers is 'K. J. of Sports Science(체육과학연구;13)', and the society is 'Rehabilitation Engineering And Assistive Technology Society of Korea(한국재활복지공학회; 14)'. The University that published the most dissertations is 'Sahmyook University(11)'. 8. The authors who published the most studies are Ju-Hwan O(8) as the main author and Tae Kyu Kwon(18) as the co-author (including the thesis Director). In an integrated analysis of the authors and co-authors, Tae Kyu Kwon published the most numerous studies(19) Conclusions : 1. The study of vibration or wave therapy has been increasing noticeably every year. 2. The major academic Fields studying vibration or wave therapy are the 'Kinesiologic Field', 'Physical Therapy Field', and 'Biomedical Engineering Field'. 3. The most chosen method of study design on vibration or wave treatment was 'RCT', and there was no significant change in the annual presentation rate. 4. Types of vibration or wave therapy could be classified as 'LVS(Local Vibration Stimulation)', 'WBV(Whole Body Vibration)', 'MV(Micro Vibration)', 'BV(Bio Vibration)' and 'SWV(Sound Wave Vibration)', and the study on Whole Body Vibration is most active. 5. Most of the studies of vibration or wave therapy were on musculoskeletal systems, but there were very few studies on internal diseases.

• Journal of Biomedical Engineering Research
• /
• v.43 no.2
• /
• pp.81-93
• /
• 2022

Proprioception training has been considered a secondary method to facilitate postural control ability. This study investigated the effects of two different proprioception training methods - the proprioceptive neuromuscular facilitation (PNF) and visual feedback-based joint position and force reproduction (VF) - on postural control advancements. Sixteen healthy people volunteered for this study, and they randomly grouped two. Each group participated in the PNF and VF training for three weeks. We evaluated each subject's proprioception levels and balance ability before and after the training. We used a clinometer and electromyogram (EMG) for VF training. The joint position reproduction test was also used to evaluate the position and force aspects of the proprioception level. We analyzed the trajectory of the center of pressure (COP) while subjects were standing on the firm floor and balance board with one leg using a pressure mat. The improvement of the position aspect of the proprioception level of the VF group (4.93±4.74°) was larger than that of the PNF group (-0.43±2.08°) significantly (p=0.012). The improvement of the anterior-posterior COP velocity of the PNF group (0.01±0.01 cm/s) was larger than that of VF group(0.002±0.01 cm/s) significantly (p=0.046). Changes of position error in the PNF group (rho=0.762, p=0.028) and tibialis anterior force reproduction error in the VF group showed a significantly strong relationship with balance ability variables. These results showed that different PNF and VF have different effects on improving two aspects of proprioception and their relationship with the balance ability. Therefore, these results might be useful for selecting proprioception or balance rehabilitation considering the clinical and patients' situation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.67-76
• /
• 2023

In this study, in order to enhance the joint capacity between the existing reinforced concrete (R/C) frame and the reinforcement member, we proposed a novel concept of Internal Composite Seismic Strengthening Method (CSSM) for seismic retrofit of existing domestic medium-to-low-rise R/C buildings. The Internal CSSM rehabilitation system is a type of strength-enhancing reinforcement systems, to easily increase the ultimate horizontal shear capacity of R/C structures without seismic details in Korea, which show shear collapse mechanism. Two test specimens of full-size two-story R/C frame were fabricated based on an existing domestic R/C building without seismic details, and then retrofitted by using the proposed CSSM seismic system; therefore, one control test specimen and one test specimen reinforced with the CSSM system were used. Pseudo-dynamic testing was carried out to evaluate seismic strengthening effects, and the seismic response characteristics of the proposed system, in terms of the maximum shear force, response story drift, and seismic damage degree compared with the control specimen (R/C bare frame). Experiment results indicated that the proposed CSSM reinforcement system, internally installed to the existing R/C frame, effectively enhanced the horizontal shear force, resulting in reduced story drift of R/C buildings even under a massive earthquake.

• Resources Recycling
• /
• v.32 no.3
• /
• pp.38-44
• /
• 2023

Leaching tests were conducted using sulfuric acid and sodium hydroxide solutions to remove impurities from domestic graphite concentrate. As a result of the leaching experiment using sulfuric acid solution and sodium hydroxide solution, respectively, the difference of removal efficiency was insignificant when the concentration of sodium hydroxide or sulfuric acid was 2 mol/L or more. The fixed carbon content increased with increasing the temperature in the sulfuric acid solution leaching, while it remains constant above 150℃ in sodium hydroxide solution. For the repeated sequential leaching tests, the leaching conditions were 2 mol/L NaOH, 200℃, 1 hour in the sodium hydroxide solution leaching and 2 mol/L H₂SO₄, 100℃, 1 hour in the sulfuric acid solution leaching, respectively. When sulfuric acid leaching followed by sodium hydroxide solution leaching was repeated 5 times, the fixed carbon increased to 99.95% and ash content decreased to 0.048%, while the fixed carbon increased to 99.98% and ash content was reduced to 0.018 when sodium hydroxide solution leaching followed by sulfuric acid solution leaching was repeated 5 times.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.64-71
• /
• 2024

Purpose: The purpose of this study is to evaluate Ti-base abutment's three different heights and three different cement types on the pull-off force of zirconia-based restorations. Materials and Methods: A total of 90 fixture lab analogs were embedded in auto polymerizing resin bloack. 90 Ti-base abutments heights of 3 mm, 5 mm, 7 mm were scanned and zirconia restoration were prepared from scanned files. Zirconia restoration were cemented with three different types of cements (temporary, semi-permanent, permanent) following manufacturer's instructions. All 90 specimens were placed and tested in a universal testing machine for pull-out testing. Retention was measured by recording the force at load drop. Statistical analysis was performed using Kruskal-Wallis test for detecting whether there are any statistical significance along cement types or abutment heights. After that, Mann-Whitney test was used for figuring out differences regarding abutment height and the comparison between 3 cements. Results: Temp bond showed significantly lower pull-off force compared to Fujicem regardless of any abutment height. However, there were significant differences between Cem-implant and Fujicem in abutment height of 3 mm and 7 mm, but there was no significant difference in 5 mm. Temp bond and Cem-implant had significant differences only in abutment height of 5 mm. Conclusion: Although Ti-base abutment height did not influenced zirconia restorations' retentiveness, cement types showed significant differences.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.201-209
• /
• 2010

Generally, PSC girder bridge uses total gross cross section to resist applied loads unlike reinforced concrete member. Also, it is used as short and middle span (less than 30 m) bridges due to advantages such as ease of design and construction, reduction of cost, and convenience of maintenance. But, due to recent increased public interests for environmental friendly and appearance appealing bridges all over the world, the demands for longer span bridges have been continuously increasing. This trend is shown not only in ordinary long span bridge types such as cable supported bridges but also in PSC girder bridges. In order to meet the increasing demands for new type of long span bridges, PSC hollow box girder with H-type steel as compression reinforcements is developed for bridge with a single span of more than 50 m. The developed PSC girder applies compressive prestressing at H-type compression reinforcements using unbonded PS tendon. The purpose of compressive prestressing is to recover plastic displacement of PSC girder after long term service by releasing the prestressing. The static test composed of 4 different stages in 3-point bending test is performed to verify safety of the bridge. First stage loading is applied until tensile cracks form. Then in second stage, the load is removed and the girder is unloaded. In third stage, after removal of loading, recovery of remaining plastic deformation is verified as the compressive prestressing is removed at H-type reinforcements. Then, in fourth stage, loading is continued until the girder fails. The experimental results showed that the first crack occurs at 1,615 kN with a corresponding displacement of 187.0 mm. The introduction of the additional compressive stress in the lower part of the girder from the removal of unbonded compressive prestressing of the H-type steel showed a capacity improvement of about 60% (7.7 mm) recovery of the residual deformation (18.7 mm) that occurred from load increase. By using prestressed H-type steel as compression reinforcements in the upper part of cross section, repair and rehabilitation of PSC girders are relatively easy, and the cost of maintenance is expected to decrease.