• 한국가축번식학회지
• /
• 제17권4호
• /
• pp.279-285
• /
• 1994

The objective of the present study was to characterize the cell cycles of granulosa cell populations during follicular maturation in cattle by using flow cytometer. Granulosa cells were isolated from bovine preovulatory antral follicles of F1(>10mm), F2(5~20mm), F3(3~4mm) and F4(1~2mm) diameter and fixed and stained with fluorochromes that selectively bine to DNA. Flow cytometer equipped with a laser excitation system was used to analyze the intensity of fluorescence from stained cells. Forward angle light-scatter(FSC) and 90$^{\circ}$light-scatter(SSC) signals were adopted to measure the size and the granularity of granulosa cells. As a results of FSC/SSC analysis, granulosa cell populations(G1 phase of cell cycle) from each follicle were relatively regular in size and granularity, regardless of follicular size. However, their distribution in granularity was greater than that in size. Most of granulosa cell populations collected from each follicle were distributed in G0/G1, S and G2/M phases. As the follicles approached to ovulation the percentage of cells in the proliferative phases of cell cycle (S and G2/M) decreased significantly, but there was a concomitant increase in the percentage of granulosa cells in G1 phase. Therefore, these data indicate the proportion of main populations to cell cycle of granulosa cells may be changed from proliferative phase to G1 phase during follicular maturation in cattle.

• 전산구조공학
• /
• 제10권4호
• /
• pp.251-265
• /
• 1997

해양계선시스템(offshore mooring system)의 거동을 구분적선형시스템(piecewise-linear system)을 이용하여 분석하였다. 계선시스템의 복원력을 유도하고 거기에 상응하는 근사치 구분적선형시스템의 복원력을 구하여 두 시스템의 복원력을 비교하였다. 다양한 파력 하에서의 계선시스템의 응답거동을 분석하였다. 시스템의 비선형정도 및 매개변수의 영향에 대하여 집중적으로 연구하였다. 시스템의 응답거동의 특성은 포인케어맵(Poincare map)을 통하여 확인하였다. 구분적선형시스템을 이용하여 분석한 결과, 계선시스템은 일반 조화, 열조화 및 복잡한 비선형거동인 chaos를 포함한 다양한 응답거동을 갖음을 알아냈다. 여러 값의 매개변수를 적용하여 시스템의 응답거동에 미치는 영향을 알아냈으며, 매개변수지도를 통하여 응답거동의 영역을 확인하였다.

• 국제초고층학회논문집
• /
• 제3권4호
• /
• pp.297-304
• /
• 2014

Recently, there have been some reported examples of structural collapse due to gravity, subsequent to damage from accident or an excitation that was not prepared for in the design process. A close view of new concepts, such as a redundancy and key elements, has been taken with the aim of ensuring the robustness of a structure, even in the event of an unexpected disturbance. The author previously proposed a sensitivity index of the vertical load carrying capacity to member disappearance for framed structures. The index is defined as the ratio of the load carrying capacity after a member or a set of an adjacent member disappears, to the original load carrying capacity. The member with the highest index may be regarded as a key element. The concept of bio-mimicry is being applied to various fields of engineering, and tree-shaped structures are sometimes used for the design of building structures. In this study a sensitivity analysis is applied to the irregular-framed structures such as tree-shaped structures.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.399-411
• /
• 2018

The difficulty in modeling complex nonlinear structures lies in the presence of significant sources of uncertainties mainly attributed to sudden changes in the structure's behavior caused by regular aging factors or extreme events. Quantifying these uncertainties and accurately representing them within the complex mathematical framework of Structural Health Monitoring (SHM) are significantly essential for system identification and damage detection purposes. This study highlights the importance of uncertainty quantification in SHM frameworks, and presents a comparative analysis between intrusive and non-intrusive techniques in quantifying uncertainties for SHM purposes through two different variations of the Kalman Filter (KF) method, the Ensemble Kalman filter (EnKF) and the Polynomial Chaos Kalman Filter (PCKF). The comparative analysis is based on a numerical example that consists of a four degrees-of-freedom (DOF) system, comprising Bouc-Wen hysteretic behavior and subjected to El-Centro earthquake excitation. The comparison is based on the ability of each technique to quantify the different sources of uncertainty for SHM purposes and to accurately approximate the system state and parameters when compared to the true state with the least computational burden. While the results show that both filters are able to locate the damage in space and time and to accurately estimate the system responses and unknown parameters, the computational cost of PCKF is shown to be less than that of EnKF for a similar level of numerical accuracy.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.101-109
• /
• 2008

유도전동기는 회전에 필요한 자계를 유지하기 위해 무효전력을 필요로 한다. 만일 전원측을 대신하여 부하측에서 무효전력이 제공될 경우 역률은 향상될 것이다. 유도전동기의 역률은 대개 낮으므로 커패시터로 보상이 필요하다. 내선규정에서 유도전동기의 역률 보상 커패시터의 용량은 출력에 따라 추천된 값의 설치를 권고하고 있다. 그러나 유도전동기는 같은 출력에서도 회전수에 따라 특성이 달라지므로 역률이 일정하지 않아 용량에 따라 일정한 커패시터의 적용은 부적합하다. 그래서 본 논문에서는 같은 출력조건에서 속도에 따라 기존에 제시된 값과 비교한 결과 역률 보상 커패시터의 용량이 약간 높게 설정되어야 함을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제76권6호
• /
• pp.765-779
• /
• 2020

This article presents a nonclassical size dependent model based on the modified couple stress theory to study and analyze the bending behavior of perforated microbeams under different loading patterns. Modified equivalent material and geometrical parameters for perforated beam are presented. The modified couple stress theory with one material length scale parameter is adopted to incorporate the microstructure effect into the governing equations of perforated beam structure. The governing equilibrium equations of the perforated Timoshenko as well as the perforated Euler Bernoulli are developed based on the potential energy minimization principle. The Poisson's effect is included in the governing equilibrium equations. Regular square perforation configuration is considered. Based on Fourier series expansion, closed forms for the bending deflection and the rotational displacements are obtained for simply supported perforated microbeams. The proposed methodology is validated and compared with the available results in the literature and an excellent agreement is detected. Numerical results demonstrated the applicability of the proposed methodology to investigate the bending behavior of regularly squared perforated beams incorporating microstructure effect under different excitation patterns. The obtained results are significantly important for the design and production of perforated microbeam structures.

• 한국해양공학회지
• /
• 제37권6호
• /
• pp.238-246
• /
• 2023

This paper proposes an effective inertia coefficient (EIC) in the Morison equation for better wave-force calculations. The OC4 semi-submersible floating offshore wind turbine (FOWT) platform was considered to test the feasibility. Large diffraction at large Keulegan-Carpenter (KC) numbers and the interaction between columns can result in errors in estimating the wave force using the Morison equation with a theoretical inertia coefficient, which can be corrected by the EIC as a function of the wave period and direction. The horizontal and vertical wave forces were calculated using the Morison equation and potential theory at each column, wave period, and wave direction. The EICs of each column were then obtained, resulting in a minimal difference between the Morison inertia force and the wave excitation force by the potential theory. The EICs, wave forces, phase angles, and dynamic motions were compared to confirm the feasibility of an EIC concept under regular and random waves.

• 대한환경공학회지
• /
• 제37권5호
• /
• pp.269-276
• /
• 2015

본 연구는 경상북도 지역에서 호소수를 원수로 사용하는 한 정수장의 원수 및 공정별 처리수의 자연유기물질(NOM) 및 소독부산물(DBPs) 생성특성을 조사하고 정수공정내 DBPs 제어방안을 제시하였다. Fluorescence excitation-emission matrix (FEEM) 분석결과 원수의 NOM은 토양과 미생물의 복합기원에 의한 것으로 밝혀졌다. NOM의 분자량크기 및 분획제거 특성은 liquid chromatography-organic carbon detector (LC-OCD)를 이용하여 분석하였다. 대체로 휴믹물질과 저분자량 유기물질 분획이 많았고, 고분자량물질은 저분자량물질보다 응집 침전공정에서 제거가 용이한 것으로 나타났다. 전염소주입 후 정수공정별로 진행될수록 반응시간이 길어져 DBPs 농도가 증가하였으며 생성된 DBPs는 일반적인 정수처리로 제거되지 않았다. THMs은 chloroform이 74%로 주종을 이루었으며 bromodichloromethane (22%)와 dibromochloromethane (4%)도 발생했다. HAAs는 dichloroacetic acid (50%)와 trichloroacetic acid (48%)가 주종을 이루었고 dibromoacetic acid (2%) 등 브롬계열은 농도가 낮거나 발생되지 않았다. HANs은 dichloroacetonitrile (60%), bromochloroacetonitrile (30%), dibromoacetonitrile (10%)이 발생되었다. 실험기간 동안 해당 정수장에서 DBPs 발생은 용존유기물농도와 수온보다 전염소주입농도에 큰 영향을 받은 것으로 나타났고, 염소주입농도의 조절로 DBPs 생성농도를 이전에 비해 16~44% 감소시킬 수 있었다.

• 대한조선학회논문집
• /
• 제50권2호
• /
• pp.120-128
• /
• 2013

This paper presents the results of sloshing experiments having different fluids in model tanks with various density ratios. The experimental model consisting water and air at ambient, which has been commonly used, is not consistent in density ratio with that of an actual LNG cargo tank. Therefore, an advanced experimental scheme is developed to consider the same density ratio of LNG and NG by using a mixed gas of sulfur hexafluoride ($SF_6$) and nitrogen ($N_2$). For experimental observation, a two-dimensional model tank of 1/40 scale and a three-dimensional model tank of 1/50 scale have been manufactured and tested at various conditions. Two different fillings with various excitation frequencies under regular motions have been considered for the two-dimensional model tank, and three different filling levels under irregular motions have been imposed for the three-dimensional model tank. The density ratio between gas and liquid varies from the ratio of the ambient air and water to that of the actual LNG cargo container, and the different composition of gas is used for this variation. Based on the present experimental results, it is found that the decrease of sloshing pressure is predicted when the density ratio increases.

• 대한기계학회논문집A
• /
• 제36권8호
• /
• pp.905-911
• /
• 2012

부유식 해상풍력발전기의 시뮬레이션을 위해서 본 연구에서는 2MW 육상 풍력발전기에 부유구조물인 Tension Leg Platform(TLP) 구조를 추가하였다. 기상청 관측데이터와 해수면으로부터의 높이에 대해 풍속을 정의하는 지수법칙을 이용하여 풍하중을 산출하고 블레이드와 타워에 일정한 높이간격으로 적용하였다. 상대모리슨 방정식을 이용하여 파랑하중을 모델링하였다. 블레이드의 회전속도를 정격속도인 18rpm 으로 고려하고, 풍하중과 파랑하중 작용 시 2MW의 부유식 해상풍력기의 동적거동 해석을 수행하였다. 파랑하중에 대한 해상풍력기의 공진특성을 조사하기 위해 타워와 블레이드의 탄성체 모델을 구성하여 해상풍력기의 고유진동수를 계산하였다. 타워와 블레이드의 탄성효과가 해상풍력기의 거동에 미치는 영향을 분석하기 위해 타워만 탄성체로 구성된 탄성타워모델과 타워와 블레이드가 탄성체로 고려된 탄성타워 블레이드모델을 각각 강체 모델과 비교하였다.