• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.987-992
• /
• 2014

Register control of roll-to-roll printing system for printed electronics requires accurate measurement of register errors. The register marks used for the recognition of patterns position between layers have inherently defects due to low printability of register marks themselves, which brings out inaccurate register accuracy and consequently low performance of printed electronics devices. In this study, the compensation methods for the unrecognized or missing register data are proposed to improve the recognition and consequently the control performance of register accuracy in roll-to-roll printing equipment. The compensation methods using the prior data and the linear interpolation are proposed and compared with the case without compensation for the simulation as well as experiment. Only the linear interpolation method could successfully compensate the missing data and consequently improve the register control performance. We should apply the compensation process of the register errors to improve the register control accuracy in the roll-to-roll printing equipment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.323-324
• /
• 2006

This paper presents dynamics of register error on a compensator roll type converting machine. Though a register control is an important aspect of a converting machine, it has not been taken into account as a main subject. Lately, demands for high speed converting machines over 500mpm(m/min) are raising but domestic converting industries can not come up with the high speed machines because capacities fur designing of the converting machine is restricted lower than 300mpm. Moreover register control is the key to product flexible displays through roll-to-roll systems. In this paper, a compensator roll type register controller is analyzed using mathematical model of register error. A case study for reducing transient register errors is discussed.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.324-329
• /
• 2022

This paper proposes a shift-register-based multichannel ultrasonic focusing delay control method using a complex programmable logic device (CPLD) for a high resolution of ultrasonic focusing system. The proposed method can achieve the ultrasonic focusing through the delay control of driving signals of each ultrasonic transducer of an ultrasonic array. The delay of the driving signals of all ultrasonic channels can be controlled by setting the shift register in the CPLD. The experiment verified that the frequency of the clock used for the delay control increased, the error of the focusing point decreased, and the diameter of the focusing point decreased as the length of the shift register in the proposed method. The proposed method used only one CPLD for ultrasonic focusing and did not require to use complex hardware circuits. Therefore, the resources required for the design of an ultrasonic focusing system could be reduced. The proposed method can be applied to the fields of human computer interaction (HCI), virtual reality (VR) and augmented reality (AR).

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1809-1810
• /
• 2006

Existing a high-speed printer register controller have used a foreign country goods of the high price. It established the plan to be and progressed to progress research. It find out about former time's a register control system's action. and determined the processor to DSP. It studied the algorithm to consider various situations. It completed finally a simulator board of a register controller of the high capacity.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.17 no.2
• /
• pp.115-126
• /
• 2006

Background and Objectives : Training of breath support and laryngeal muscles control are important components in the development of the singing voice. The purpose of this study is to compare characteristics of respiratory and phonatory control on pitch, loudness, register change with untrained males and trained male singers. Materials and Methods : The 11 untrained males and 11 trained male singers participated. Closed Quotient(CQ), fundamental frequency (fo) and relative volume contribution of the rib cage (in percentage rib cage, % RC) and relative volume contribution of abdomen (in percentage abdomen, % AB) were measured during various pitch, loudness, register tasks using /a/ vowel phonation : Legato, staccato with C3-D3-E3-F3-G3 notes and crescendo and decrescendo with C3 note as well as modal register with C3 and falsetto register with C4 note using an integrated analysis system of Respiration, EGG and Voice. Results : (1) When pitch increased with legato task, loudness also increased in untrained male group but maintained in trained male singers. CQ was also increased both untrained and trained male singers but it was not significantly different ($p>.05$). The abdomen contribution to lung volume were significantly predominant both in inhalation and exhalation in trained males singers ($p<.05$). (2) When pitch increased with staccato task, CQ was not significantly different in untrained but significantly different in trained male singers. The respiratory function of male singers were characterized by significantly predominant abdomen contribution to lung volume in exhalation except for inhalation ($p<.05$) (3) When loudness increased with crescendo, fo was significantly increased with increasing CQ in untrained males but fo was relatively consistent with increasing CQ in trained male singers. The respiratory function of male singers were characterized by significantly predominant abdomen contribution to lung volume in exhalation except for inhalation ($p<.05$). (4) Most male singers were able to change register from modal to falsetto register, but untrained males were not. Thus, CQ was significantly different between modal and falsetto register in trained male singers ($p<.05$). The respiratory function of male singers were characterized by significantly predominant abdomen contribution to lung volume in exhalation except for inhalation ($p<.05$). Conclusion : Male singers were superior to untrained males in coordination of respiratory and phonatory control on pitch, loudness, register change. Implication are offered regarding how the results might be applied to the voice therapy as well as singing training.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.325-326
• /
• 2006

Recently, it is concentrated on productivity improvement in high speed operation by converting industries. Register error is becoming the one of the most issued problem. Moreover register control is the key to product flexible displays through roll-to-roll systems. This paper presents a derivation of register error modeling. And the dynamics of register error is simulated under various conditions. Register error is affected by both roll velocity and tension between the front and back span. And dynamics of register error is to be an interaction in succeeding spans.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.624-626
• /
• 2008

Excessively high temperature deteriorates the reliability and increases the leakage power consumption of microprocessors. The register file, known as one of the hottest functional units in microprocessors, incurs frequent dynamic thermal management operations for thermal control. In this letter, we adopt the banked register file scheme, which was originally proposed to reduce dynamic power consumption. By simply modifying the register file structure, the temperature in the register file was reduced dramatically, resulting in 13.37% performance improvement and 10.49% total processor leakage reduction.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.653-658
• /
• 2014

Roll-to-Roll printing process has become a great issue as a breakthrough for low cost and mass production of electronic devices such as organic thin film transistor, and etc. To print the electronic devices, multi-layer printing is essential, and high precision register control is required for this process. Unlike stop-and-repeat printing process, it is impossible to control the register in a static state since the roll-to-roll process is a continuous system. Therefore, the behavior of web such as polyethylene terephthalate (PET) and polyimide (PI) by the tensile and thermal stress generated in the roll-to-roll process as well as motor control of driven rolls has to be considered for a high precision register control. In this study, the correlation between curing temperature and thermal deformation of PET web is analyzed. Finally, it is verified experimentally that the temperature disturbance generates the more serious register error under the higher curing temperature.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.9-15
• /
• 2013

Roll-to-roll printing technology has lately become a subject of special interests in the field of printed electronics. Since this technology has the advantage that continuous and mass production is possible. And for high precision register control is required in multi-layer printing to produce the electronic devices, this is one of the most important technologies in roll-to-roll printing technology. Register error could be generated by various reasons like eccentricity of roll and thermal deformation due to temperature variation in drying section. In this study, the effect of tension variation on the register was analyzed. The results of these analyses show that it is essential to consider the tension disturbance which is generated by the change of temperature in drying section, and conventional register model has limitation to estimate the register error. In order to overcome the limitation of the register model, advanced register model based on the SI process was developed. Also, the performance of the developed model was verified experimentally.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.23-24
• /
• 2008