• Journal of Aquaculture
• /
• v.13 no.3
• /
• pp.253-258
• /
• 2000

Monthly samplings were made at Yongho-dong, Pusan, on the south eastern coast of Korea from May 1998 to April 1999 to investigate population growth and regeneration pattern of C. okanurae. The growth of erect branches was dependent mainly on the habitat water temperature. Maximum length of an erect branch was 13.4 cm in July and the minimum was 5.1 cm in March; during the corresponding months maximum and minimum weights of the alga were 2.2 and 0.7 g, respectively. During this investigation, gametangia did not occur. Regeneration of excised ramuli was dependent on irradiance. Regeneration rate was the highest under 50 ${\mu}$molm$^{-2}$s$^{-1}$ at 2$0^{\circ}C$. Under the conditions of different combinations of temperature (18, 22, 25, 28 and 1$^{\circ}C$) and irradiance (10, 20, 40, 60 and 100 ${\mu}$molm$^{-2}s$ $^{-1}$) regimes, regeneration of excised erect branch was highly affected by temperature and irradiance. The highest regeneration occurred at 25 $^{\circ}C$ and 20 ${\mu}$molm$^{-2}s$$^{-1}$, whereas the highest growth in length (4.5${\pm}$1.0 cm) and fresh weight (1.2${\pm}$0.7 g) was attained after 15 days of culture.

• Korean Journal of Ecology and Environment
• /
• v.53 no.3
• /
• pp.295-303
• /
• 2020

We investigated the growth response and population regeneration of four halophyte species: Suaeda japonica, Salicornia europaea, Suaeda maritima and Suaeda glauca, when climate change proceeds caused by increased CO₂ concentration and temperature. The plants collected from habitat in 2018 were transplanted into Wagner pots, and cultivated for two years in greenhouse divided into a control (ambient condition) and a treatment (elevated CO₂+elevated temperature). The shoot length of halophytes was measured in July of each year, and the population regeneration rate was measured in October 2019. The shoot lengths of S. japonica and S. glauca had no difference between control and treatment for two years. Those of S. europaea were longer in control than treatment for two years. Those of S. maritima had no difference between control and treatment in 2018 but were longer in control than treatment in 2019. In control, the shoot lengths of S. japonica, S. europaea and S. glauca had no difference between years while those of S. maritima were longer in 2018 than in 2019. In treatment, those of S. japonica, S. europaea and S. maritima were shorter in 2019 than 2018 but S. glauca had no difference between years. The regeneration rates of S. japonica, S. europaea and S. glauca were lower treatment than control, and there was no difference in the regeneration rate of S. maritima. In conclusion, if climate change progresses caused by the increase of CO₂ concentration and temperature, the shoot lengths of S. japonica, S. europaea and S. maritima will be shortened, and the regeneration rate of population will be increased only in the S. maritima.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.5
• /
• pp.328-335
• /
• 2010

The purpose of this study is to make an analysis of influence on the cooling capacity and COP of a desiccant cooling system with a regenerative evaporative cooler when a direct evaporative cooler was applied to the inlet of regeneration process of this system. We used cycle simulation in order to analyze the performance of this system. From the cycle simulation, we knew that the optimal rotation time of desiccant rotor was between 160s and 220s and hardly ever affected cooling capacity of desiccant cooling system when this system was operated at the outdoor air condition of $35^{\circ}$ and 40% RH and low regeneration temperature of $60^{\circ}$. Also there was optimal area ratio of regeneration to dehumidification between 0.7 and 1.0. Our results showed that it had a small effect on the system’s cooling capacity to install direct evaporative cooler at the inlet of regeneration process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.168-175
• /
• 2008

In-use light duty diesel vehicles are considered as one of major sources of particulate emissions in many cities, and the start of the retrofit program for the light duty diesel vehicles is expected in near future in Korea. One of the problems of the retrofit of the light duty diesel vehicles is that the exhaust gas temperature is too low to apply passive regeneration DPF systems. This study introduces a catalytic combustor as a new active DPF regeneration technology. This study shows the principle and characteristics of DPF regeneration by the catalytic combustor and suggests it's proper control method for better regeneration.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.96-102
• /
• 2004

The diesel particulate filter(DPF) is effective for particulate removal from diesel engine under a variety of conditions, and then the regeneration strategies is very important in the aspects of engine fuel consumption and engine durability. This paper addresses the changes of Peugeot 406 vehicle engine parameters(fuel injection timing, period, rail pressure, emissions exhaust temperature so on) during DPF regeneration. additionally, checked the soot loading mass with mileage and the change of fuel consumption and performance with ash accumulation.

• Journal of the Korean Society of Safety
• /
• v.7 no.1
• /
• pp.13-19
• /
• 1992

Supercritical fluid technology was applied to the regeneration of industrial catalyst contaminated with toxic materials. The regeneration process of activated loaded with phenol was proposed, then the adsorphon tower was packed with the activated carbon-bed. Phenol diffuses into supercritical carbon dioxide(SCC) through the micro-pore and voldge of the activated carbon. The saturated solubility of phenol in SCC depended on the density of SCC varing with temperature and pressure conditions. Therefore, the fasile phase equilibrium calculation model of dxpanded liquid One was proposed, and equilibrium solubility of phenol in SCC was calculated using the model theoretically. The regeneration mechanism of activated carbon was analysed by degree of saturation of phenol and diffusion in SCC. The solubility prediction was more satisfactory for the wide range of SCC density than the dense gas model and the desorption of phenol depended on the degree of saturation of phenol in SCC.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.811-814
• /
• 1997

An oxidative thermal regeneration process was developed and evaluated for its potential applicability in several environmental areas. The feasibility of the process is affected strongly by the gradual carbon loss, energy consumption, physical changes of carbon, and effective destruction efficiency of adsorbed materials during the regeneration. The aim of the study is to determine the optimum conditions to maintain acceptable destruction efficiency for adsorbed organics, controlling oxidant flow rate. Prior to its applications, various preliminary tests were carried out to determine the effects of experimental parameters on the process. The tests performed were reaction temperature, carbon loss, surface area, surface structure, and adsorptive property. The results of these tests show that the parameters are dependent on oxidant flow rate, and suggest that the process is comparable and, in some ways, possibly superior to conventional regeneration techniques because the oxidative process is a single step and less energy intensive.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1447-1450
• /
• 1999

Countercurrent oxygen reaction (COR) was developed and evaluated for regeneration of exhausted activated carbon. Whether the regeneration technique is feasible or not is affected strongly by gradual loss and physical changes of activated carbon, energy consumption, and effective removal of adsorbed materials during the process. Various parameters such as reaction temperature, the loss of activated carbon, surface area, pore volume, surface structure, adsorptive property, etc. were examined to determine the effectiveness of COR. The results of these tests showed that the parameters were strongly dependent on oxidant flow rate, and suggest that the newly developed COR is comparable and, in some ways, possibly superior to conventional regeneration techniques because the overall process runs in a single step and is less energy intensive, and also because the adsorptive capacity of exhausted activated carbon was completely recovered.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.1
• /
• pp.29-36
• /
• 2012

An experimental study has been carried out to investigate the dehumidification characteristics for several operating conditions of a compact desiccant rotor. This problem is of particular interest in the design of a desiccant type of dehumidifier. Room temperature, room humidity, regeneration temperature, revolution speed and frontal air velocity of desiccant rotor are varied as operating conditions. The results obtained indicate that dehumidification rate is increased with an increase in the room humidity while dehumidification effectiveness is not changed much. It is also found that the optimal rotor speed and optimal regeneration temperature exist for maximum dehumidification rate and dehumidification effectiveness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.313-317
• /
• 1996

This work deals with description of gas purifing system to product high pure helium gas using low temperature absorption. The system controls temperature of heaters, open/close of solenoid valves and levels of liquid nitrogen to purify a raw gas and continuously products purified gas with perfoming alternatively purification and regeneration. We develop the monitoring and control program to monitor the gas purification process on real-time and control the process time with checking the impurities in purified gas. From the result of system operation, the developed monitoring and control system continuously products high pure helium gas with reducing impurities in raw gas to permitted limits(less than 0.01 ~ 0.05 ppm)