• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.207-212
• /
• 2010

Purpose: The object of this study is to develop a novel BMP-2 delivery system for continuous osteogenic differentiation and to induce osteogenesis of stem cells using a bi-phase alginate carrier in vitro. Methods: Alginate nanoparticle loaded BMP-2 was prepared by the reverse emulsification-diffusion technique. Physical properties and release profiles of alginate carriers were measured by Instron and ELISA kit, respectively. Cell viability and alkaline phosphate activity of hBMSCs differentiation was also evaluated by MTS and Metra BAP assays, respectively. Results: Optimal concentration for bi-phase alginate carrier was determined as 2 wt% by evaluating mechanical and biological properties, and differentiation of BMSCs for bone regeneration. The 2% bi-phase alginate carrier had the lowest initial and final release ratio. In addition, the 2% bi-phase alginate carrier had a little higher ALP activity than the homogeneous carrier. An improved controlled release profile was obtained by combining alginate hydrogel with lyophilized particles. Conclusion: Bi-phase alginate carrier has many advantages such as biocompatibility and controlled release capability. It is expected to be effective as a scaffold and carrier in bone tissue engineering.

• The Korean Journal of Mycology
• /
• v.21 no.4
• /
• pp.285-292
• /
• 1993

For the enzymatic conversion of 5'-XMP to 5'-GMP, partially purified XMP aminase from Escherichia coli was coupled with the yeast, Saccharomycrs cerevisiae, capable of ATP regeneration through glycolytic pathway. In order to elevate the level of XMP aminase in E. coli, $guaB^{-}(IMP\;dehydrogenase-less)$ mutant were introduced, and the yeast used as ATP supplier was treated by some method to increase its membrane permeability. The optimum conditions for efficient conversion reaction by energy-coupled system were investigated. As the results, a CH 41, $guaB^-$ mutant of E. coli K-12, showed 2.75 fold increase in the level of XMP aminase, compared with its parent cell. And the lyophylized yeast was the most effective at the ATP supplier. The optimum temperature and pH of conversion reaction were $40{\circ]C$ and pH 7.4, and the highest conversion ratio was shown under the reaction condition of 100 mM glucose, 100 mM inorganic phosphate and 6 mM AMP. When 36 units/ml XMP aminase used under the above conditions, the amount of 60 mg/ml yeast was sufficient to be used. Under the optimum condition, 71% of 1.8 mM(65.6 mg/100 ml) 5'-XMP was converted to 5'-GMP within 8 hr.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.169-174
• /
• 2013

An experimental study has been conducted for the design of the regenerative oxy-fuel combustion system with ceramic ball. Various design parameters are considered such as ball size, regenerator weight, and combustion load. Regenerative system with a pair of oxygen burners and regenerators is set up and the temperature of oxygen and exhaust gas passing through ball regenerator is measured. It is shown that the temperature distributions with time are affected by ball diameter and regenerator weight, and the significant temperature change is observed by combustion load. As the ball size decreases and the regenerator weight increases, the regenerating temperature efficiency increases. It is found that the heat recovery ratio is low despites of high regeneration temperature efficiency.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.2
• /
• pp.33-47
• /
• 2020

With population losses and stagnant or depressed economies, the local governments embrace shrinkage and accept having a significantly smaller population. Both the initial and ongoing causes of shrinkage hold dramatic effects on the city and its remaining residents. In this context, vacant land increases as an overabundance of unused infrastructure is demolished and municipalities become burdened with increasing maintenance costs of this land. The result is that vacant land often experiences minimal management relative to social norms and have chance to provide a setting for ecological processes with urban rightsizing strategy. Therefore, urban ecosystems undergo major shifts in structure and function. We need to better understand the possibilities of where and how much of houses and land will be abandoned to assist land planners and policymakers to mitigate conflict between optimal ecological and sociological outcomes. This article, therefore, aims to identify distributional characteristics of vacant houses and lands with case study of Mokpo. The study found and verified affecting factors of vacant houses and lands by type through the use of a Maxent model and spatial data that explained housing choice and preference theory. We can predict the vacancies with the spatial variables such as land price, the population ratio over 65, and the distance from security facility. Based on the analysis, the ways of managing housing and land vacancy for sustainable development and ecological restoration method are discussed.

• Journal of Periodontal and Implant Science
• /
• v.48 no.2
• /
• pp.92-102
• /
• 2018

Purpose: This study investigated the validity of the Charlson comorbidity index (CCI) as a predictor of periodontal disease (PD) over a 12-year period. Methods: Nationwide representative samples of 149,785 adults aged ${\geq}60$ years with PD (International Classification of Disease, 10th revision [ICD-10], K052-K056) were derived from the National Health Insurance Service-Elderly Cohort during 2002-2013. The degree of comorbidity was measured using the CCI (grade 0-6), including 17 diseases weighted on the basis of their association with mortality, and data were analyzed using multivariate Cox proportional-hazards regression in order to investigate the associations of comorbid diseases (CDs) with PD. Results: The multivariate Cox regression analysis with adjustment for sociodemographic factors (sex, age, household income, insurance status, residence area, and health status) and CDs (acute myocardial infarction, congestive heart failure, peripheral vascular disease, cerebral vascular accident, dementia, pulmonary disease, connective tissue disorders, peptic ulcer, liver disease, diabetes, diabetes complications, paraplegia, renal disease, cancer, metastatic cancer, severe liver disease, and human immunodeficiency virus [HIV]) showed that the CCI in elderly comorbid participants was significantly and positively correlated with the presence of PD (grade 1: hazard ratio [HR], 1.11; P<0.001; grade ${\geq}2$: HR, 1.12, P<0.001). Conclusions: We demonstrated that a higher CCI was a significant predictor of greater risk for PD in the South Korean elderly population.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.35-39
• /
• 2015

Continuous adsorption and recovery characteristics for gold and lead-cyanide complexes in industrial wastewater were investigated by the Dowex 21K XLT resin. The Dowex 21K XLT resin could continuously remove over 95% for gold-cyanide complex until 520 bed volumes at the 0.5 mL/min of influent flow rate, however, could not remove lead-cyanide complex at all. The 96% of gold-cyanide complex adsorbed onto Dowex 21K XLT resin could be recovered by mixed solvent with HCl and acetone (7:3 ratio) within 8 bed volumes. Also, the bed volume for gold-cyanide complex using secondly reused Dowex 21K XLT resin was maintained as the 490, therefore, continuous process using Dowex 21K XLT resin can be sufficiently applied to the industrial wastewater containing gold ions.

• Journal of Forest and Environmental Science
• /
• v.32 no.1
• /
• pp.74-81
• /
• 2016

Classified into sub-tree of the growth-form, Acer pseudosieboldianum and Carpinus cordata hardly reach the uppermost canopy with limited height growth potentiality in the natural deciduous forest. However, the two species usually dominate lower stories of the forest, playing an important role in overall ecological characteristics in the forest. Based on the vegetation data of 106 $20m{\times}20m$ sample plots in Mt. Jumbong area, this study was carried out to evaluate ecological constitution by several quantitative analysis so as to understand the mechanism of the natural deciduous forest. The results indicated that individuals of A. pseudosieboldianum and C. cordata were absent or few in overstory, but emerged the most dominant species in midstory and understory, providing adequate proof of the ecological importance. The comparison of indices of succession between presented and predicted values in midstory did not make much difference, suggesting that the species composition would not change much and come close to steady state in midstory and understory. The pair combination of species association noted that A. pseudosieboldianum had significant positive association with C. cordata, Quercus mongolica, and Tilia amurensis had significant positive association with A. pseudosieboldianum, A. pictum subsp. mono and Fraxinus mandshurica but negative association with F. rhynchophylla. Being compared with other major canopy tree species in the study forest, the target species of A. pseudosieboldianum and C. cordata had strong regeneration strategies, partially characterized by large number of saplings and pole sized trees and high ratio of live crown, which indicated high shade tolerance to survive in the limited amount of light under the canopy. Even though A. pseudosieboldianum and C. cordata do not reach and occupy the canopy layer mainly due to the inherent growth form, they would have highest competitive potentiality to prosper and dominate in the midstory of the natural deciduous forest.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.3
• /
• pp.119-123
• /
• 2015

Objectives: Dentin is composed of many minerals and growth factors. Based on this composition, we studied its effect as a possible regenerative material for alveolar healing. Materials and Methods: This study was conducted using four 2.5-year-old mongrel dogs (male; weight, 25 to 30 kg). The third mandibular premolars were carefully mobilized with a dental elevator and then removed using forceps. The crown portions of the extracted teeth were removed with cutters, and the root portions of the remaining teeth were collectively trimmed as closely as possible to 350 to $500{\mu}m$. Dentin and cementum (DC) chips harvested from the extracted teeth were soaked in blood and packed into the fresh sockets (autograft). Biopsies were performed at the ends of day 14 and day 56 following implantation. Data were expressed as $mean{\pm}standard$ deviation and compared with t-test results. Results: The ratio of $S_A$(bone) to total area of each probe was determined and was $170{\pm}16{\mu}m^2$ for the control group and $71{\pm}14{\mu}m^2$ for the DC group, a significant difference (P <0.05). Conclusion: DC particulate grafts offered no improvement in bone regeneration in alveolar extraction sockets.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.86-92
• /
• 2016

In this study, we used a polymer deposition system, based on fused deposition modeling, to fabricate the 3D scaffold and then fabricated micro-pores on a 3D scaffold using a salt leaching method. Materials included polycaprolactone (PCL) and sodium chloride (NaCl). The 3D porous scaffolds were fabricated according to blending ratio such as PCL (70 wt%)/NaCl (30 wt%) and PCL (50 wt%)/NaCl (50 wt%). The 3D porous scaffolds were observed by scanning electron microscopy. The results showed that 3D porous scaffolds had a deposition width of $500{\mu}m$, contained a pore size of $500{\mu}m$ and below $100{\mu}m$. To evaluate the 3D porous scaffolds for bone tissue engineering, we carried out the cell proliferation experiment using a CCK-8 and a mechanical strength test using a universal testing machine. In summary, the 3D porous scaffold was found to be suitable for cancellous bone of human in accordance with the result of in-vitro cell proliferation and mechanical strength. Thus, a 3D porous scaffold could be a promising approach for effective bone regeneration.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.523-531
• /
• 2012

The performance simulation of a desiccant rotor, which is a core component of a desiccant cooling system, was conducted on the basis of a theoretical solution of the heat and mass transfer process in the rotor. The simulation model was validated by comparing simulation results with experimental data; reasonable agreement was observed. The effect of the rotation speed on the performance of the desiccant rotor was investigated for various operation conditions: temperature (50 to $70^{\circ}C$), humidity ratio (0.01 to 0.02 kg/kg DA), and flow rate of regeneration air. The optimum rotation speed was determined from the maximum moisture removal capacity (MRC) of the desiccant rotor, and it was found to vary with the operation conditions. Further, the correlation for the optimum rotation speed was determined by regression analysis.