• Current Industrial and Technological Trends in Aerospace
• /
• v.9 no.1
• /
• pp.139-149
• /
• 2011

The combustion chamber and nozzle of a liquid rocket engine need thermal protection against the high temperature combustion gas. The nozzle extension of a high-altitude engine also has to be compatible with high temperature environment and several kinds of cooling methods including gas film cooling, ablative cooling and radiative cooling are used. Especially for an upper-stage nozzle extension having a large expansion ratio, the weight impact on the launcher performance is crucial and it necessitated the development of light-weight refractory material. The present survey on the nozzle extension materials employed in the liquid rocket engines of USA, Russia and European Union has revealed a trend that the heavier metals like stainless steels and titanium alloys are being substituted with light weight carbon fiber or ceramic matrix composite materials.

• Journal of Korea Foundry Society
• /
• v.27 no.1
• /
• pp.42-47
• /
• 2007

Vacuum molding process(V-process) has several benefits such as a lower total production cost and a high quality casting comparing to the conventional sand molding. Influence of the gating design on the molten metal flow was investigated in this study. General criteria for the gating design of the castings and commercial codes for the flow and solidification analysis were used to attain the optimized gating design in V-process. Though mold cavity was filled smoothly under the low initial velocity of molten metal, molten metal dashed against the upper part of the mold before the completion of the mold filling with higher initial molten metal velocity and fell soon. This phenomenon may affect collapsing the mold shape, however it is thought that the possibility of burning out of the vinyl by the molten metal is not so high because vinyl is coated with refractory material.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.21-28
• /
• 2000

Refractory metals, W and Ti, and their nitrides, $W_2N$ and TiN, were investigated for using as an ohmic contact material with SiC single crystalline thin films. The possibility of nitride materials for using as a stable ohmic contact material of SiC at high temperatures was examined by considering the thermal stability depending on the heat treatment temperature, their electrical properties and protective behavior from the interdiffusion. W contact with SiC thin films, deposited by using new organosilicon precursor, bis-trimethylsilylmethane, showed the lowest resistivity, $2.17{\times}10^{-5}$Ω$\textrm{cm}^2$. On the other hand, Ti-based contact materials showed higher contact resistivity than W-based ones. The oxidation of contact materials was restricted by applying Pt thin films on those electrodes. Nitride electrodes had rather stable electrical properties and better protective behavior from interdiffusion than metal electrodes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7885-7889
• /
• 2014

Background: Activating mutations of epidermal growth factor receptor (EGFR) could predict response to tyrosine kinase inhibitor (TKI) treatment in patients with non-small cell lung cancer (NSCLC). However, the detection of EGFR mutation is frequently challenging in clinical practice for the lack of tumor tissue. The aim of this study was to investigate the feasibility of performing EGFR mutation testing on various types of liquid-based cytology (LBC) samples. Materials and Methods: A total of 434 liquid-based cytology samples were collected from March 2010 and November 2013. Among them, 101 with diagnosis of lung adenocarcinoma had paired surgically resected specimens. The ADx Amplification Refractory Mutation System (ADx-ARMS) was used to determine EGFR mutation status both in LBC and resected samples. Results: All liquid-based cytology samples were adequate for EGFR mutation analysis. The mutation rate was 50.5% in the 434 NSCLC patients with LBC samples and the incidence rates of EGFR mutation were consistent among different specimens. We also detected EGFR positives in 52.5% (53/101) patients with paired histologic specimens. The concordance rate of EGFR mutation between LBC samples and paired histologic specimens was 92.1%. Conclusions: Our results suggest that liquid-based cytology samples are highly reliable for EGFR mutation testing in patients with NSCLC.

• Clinics in Shoulder and Elbow
• /
• v.11 no.1
• /
• pp.19-23
• /
• 2008

Purpose: To evaluate the bursoscopic findings of refractory primary adhesive capsulitis of the shoulder and to determine the clinical correlation. Materials and Methods: Arthroscopic capsular release was performed in 21 refractory adhesive capsulitis patients who had not responded to conservative treatment. The VAS for pain, range of motion, UCLA score was checked before and after surgery, and at the last follow up. Results: Bursitis, mild friction and impingement on coracoacromial ligament, as well as adhesion were observed. The function and pain improved earlier than after simple acromiohumeral joint capsular release. Conclusion: Subacromial bursoscopy helps rule out a hidden secondary frozen shoulder or secondary changes with primary adhesion. In addition, it has the advantage of being both a treatment and procedure for making a prognosis.

• Journal of the Korean Ceramic Society
• /
• v.15 no.4
• /
• pp.213-223
• /
• 1978

The purpsoe of this study was to produce domestic stamping materials; sling mass which could be used as unburned refractory for iron melt'ladle. Batch compositions were based on Belgian Ladelite; mineral compositions were composed of 84 wt% of quartz and 16 wt% of clay, and particle sizes were divided into 12 wt% of 1410/297㎛, 18wt% 297/149㎛, 20wt% of 149/74㎛, 11wt% 74/44㎛ and 39wt% 44㎛ under. The effect of variable batch compositions were also investigated such as substitution of pyrophylite or industrial grade alumina for quartz and of zircon for portion of quartz and clay, increase of clay and addition on sericite. Samples were pressed at 100kg/㎠ with 7.4wt% of water or 7.4wt% of 4 wt% PVA solution. Dried and Fired properties of samples such as linear shrinkage, apparent porosity, modulus of rupture, refractoriness and corrosion resistance to blast furnace slag were investigated. The results are summarized as follows. 1. Dried samples are shrinked, but fired at 700-1400℃ expanded. Samples fired at 700-1000℃ and 1200-1400℃ tended to expand with incresing of firing temperature, but fired at 1000-1200℃ tended to shrink with increase of firing temperature. 2. Apparent porosity of samples fired at 700℃ is increased, but fired at 1200-1400℃ decreased with increasing of firing temperature. 3. Modulus of rupture of samples fired at 700℃ is decreased, but fired at above 700℃ increased with increasment of firing temperature. 4. Dried samples with 7.4 wt% of 4 wt% PVA solution better improve modulus of rupture than with 7.4 wt% of water, but the firing strength of the sampels fired at 700-1000℃ is showed reversely. 5. In quartz-clay system, mineral phases of samples fired at above 1200℃ are consisted of α-quartz, α-cristobalite and mullite. Respectively as firing temperature was rising up, intensity of α-cristobalite and mullite is in creased. 6. Quartz-Kibushi clay system, Kimcheun quartz(substitutuion of portion of industrial grade alumina for quartz) Hampyeung clay system and pyrophyllite-clay system are better in corrosion resistance to blast furnace slag than burned pyrophyllite brick. 7. 84 wt% of pyrophyllite-16wt% of clay system is superior in modulus of rupture and corrosion resistance to blast furnace slag to 84 wt% of quartz-16 wt% of clay system.

• Journal of the Korean Arthroscopy Society
• /
• v.8 no.2
• /
• pp.109-114
• /
• 2004

Purpose: To evaluate the clinical results and prove the effectiveness of arthroscopic capsular release in refractory adhesive capsulitis of shoulder. Materials and Methods: We preformed arthroscopic capsular refractory adhesive capsulitis that not responded by stretching execies for above 1 year. 21 cases were followed above 1 year and average follow up 3 years 1 months (1${\sim}$5 years). We checked VAS of pain, ADL of function. UCLA score which were evaluated at preoperation, postoperation 6 months, 1 years and last follow up period, and compared with each other at last follow up. Results: The VAS score improved average preoperative score 8 to average postoperative score1, the ADL score improved average preoperative score 7 to average postoperative score 26, the UCLA score improved average preoperative score 8 to average postoperative score 34. Forward elevation improved average preoperative 75 degrees to average postoperative 175 degrees, external rotatiion at side improved average preoperative 4 degrees to average postoperative 52 degrees, abduction improved average Preoperative 60 degrees to average postoperative 170 degrees, internal rotation at posterior improved preoperative thigh-lumbar 3 spinous process to postoperative 7th thoracic spinous process~9th thoracic spinous process. Conclusion: Arthroscopic capsular release in refractory adhesive capsulitis that non responsive to stretching exercise for above 1 year were effective treatment method.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.33 no.1
• /
• pp.20-25
• /
• 2022

Background and Objectives Globus pharyngeus is one of the most common symptoms of patients visiting otorhinolaryngology out-patient clinic, and usually long-lasting, difficult to treat, and frequently recurrent. Mucomyst^®, N-acetyl cysteine is an inhalation agent mainly used for mucolysis and reducing inflammation in airway via antioxidative effect. The purpose of this study was to evaluate the efficacy of inhaled Mucomyst^® treatment in patients with globus pharyngeus refractory to proton pump inhibitor (PPI). Materials and Method We prospectively evaluated the efficacy of Mucomyst^® in relieving symptoms of globus pharyngeus refractory to PPI in nine medical centers. Three hundred and three patients enrolled and finally 229 patients finished the inhaled Mucomyst^® therapy for 8 weeks. We analyzed the change of Reflux Symptom Index (RSI), Reflux Finding Score (RFS), Visual Analogue Scale (VAS) for globus, and Globus Pharyngeus Symptom Scale (GPS) after use of Mucomyst^® for 4 and 8 weeks. Results The GPS, RSI, RFS, and VAS score significantly decreased serially in patients who finished 8 week-inhalation treatment. The GPS improvement gap was significantly correlated with initial GPS (p<0.001) in multiple regression analysis. Conclusion Inhaled Mucomyst^® therapy was effective for the reduction of both subjective and objective findings in refractory globus patients. This study might suggest new treatment option for patients with globus. However, further thorough studies would be needed to assess the real effect of inhaled Mucomyst^® treatment as a standard treatment for globus.

• Korean Journal of Materials Research
• /
• v.28 no.3
• /
• pp.166-173
• /
• 2018

Molybdenum (Mo) is one of the representative refractory metals for its high melting point, superior thermal conductivity, low density and low thermal expansion coefficient. However, due to its high melting point, it is necessary for Mo products to be fabricated at a high sintering temperature of over $1800-2000^{\circ}C$. Because this process is expensive and inefficient, studies to improve sintering property of Mo have been researched actively. In this study, we fabricated Mo nanopowders to lower the sintering temperature of Mo and tried to consolidate the Mo nanopowders through ultra high pressure compaction. We first fabricated Mo nanopowders by a mechano-chemical process to increase the specific surface area of the Mo powders. This process includes a high-energy ball milling step and a reduction step in a hydrogen atmosphere. We compacted the Mo nanopowders with ultra high pressure by magnetic pulsed compaction (MPC) before pressureless sintering. Through this process, we were able to improve the green density of the Mo compacts by more than 20 % and fabricate a high density Mo sintered body with more than a 95 % sintered density at relatively low temperature.

• Resources Recycling
• /
• v.23 no.4
• /
• pp.69-74
• /
• 2014

Slags generated in the smelting reduction of deep sea manganese nodule could be utilized as an additional materials for making Fe-Si-Mn alloys by mixing with cokes and re-smelting at an arc furnace. In this re-melting process slag is also generated, and the secondary slag is treated as waste. In this survey, recycling of the waste slag of Mn nodule was studied. It is tried to utilize the waste slag as ceramic materials or construction materials. However, it is difficult to use the waste slag directly as an additional material to ceramics such as portland cement or castable refractory material due to the much difference of chemical compositions. As an altercation road constructing material is considered, and toxicity on the soil of the waste slag was tested according to Korean Standard for testing permissible amount of toxic substances. The test result was satisfied with the requirements on the standard. So, it should be suggested that the waste slag of the Mn nodule could be utilized as constructing materials such as road filler or base materials.