• Journal of the Korean Ceramic Society
• /
• v.32 no.11
• /
• pp.1269-1275
• /
• 1995

Effects of GeO2 addition on the thermal and structural stabilities of PbO-Bi2O3-Ga2O3 glasses were studied. Thermal stabilities, as assessed by the weighted thermal stability factors [(Tx-Tg)/Tg], increased with GeO2 concentraton from 0.097 to 0.210 with the addition of 20 mol% GeO2. Increasing GeO2 content resulted in the decrease of apparent density, molar volume, refractive index and thermal expansion. On the other hand, IR transmission cut-off (λT=50%) moved from 6.73${\mu}{\textrm}{m}$ for the ternary PbO-Bi2O3-Ga2O3 glass to shorter wavelength side, 5.98${\mu}{\textrm}{m}$ for a glass containing 20mol% GeO2. There were little change with GeO2 content, however, in the activation energies for the viscous flow of approximately 140 kcal/mole within the temperature interval of 300~50$0^{\circ}C$. Addition of GeO2 to PbO-Bi2O3-Ga2O3 glasses enhanced the thermal and structural stabilities significantly at the expense of their infrared transmittance. An appropriate compsomise between these two opposite trends should be made following the specifications of the final applications.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1158-1163
• /
• 2002

An Ge/B-doped optical fiber with high photosensitivity was fabricated to induce large second-order optical nonlinearity by UV poling. It was found that long period fiber gratings were inscribed on the fiber by the 248 nm KrF excimer laser irradiation with pulse energy of 116 mJ/$cm^2$ and pulse frequency of 10 Hz without hydrogen loading treatment. The photosensitivity was measured by use of the long period fiber grating pair method and the refractive index change of 3.3$10{\times}^{-3}$ was found to be induced in the core of the optical fiber by the KrF excimer laser irradiation of 8.67 kJ/$cm^2$. An H-shaped optical fiber was also fabricated for the UV poling through optimization of the fiber drawing condition.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.105-110
• /
• 2011

The doping procedure in crystalline silicon solar cell fabrication usually contains oxygen injection during drive-in process and removal of phosphorous silicate glass(PSG). In this paper, we studied the effect of oxygen injection and PSG on conversion efficiency of solar cell. The mono crystalline silicon wafers with $156{\times}156mm^2$, $200{\mu}m$, $0.5-3.0{\Omega}{\cdot}cm$ and p-type were used. After etching $7{\mu}m$ of the surface to form the pyramidal structure, the P(phosphorous) was injected into silicon wafer using diffusion furnace to make the emitter layer. After then, the silicon nitride was deposited by the PECVD with 80 nm thickness and 2.1 refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in 400-425-450-550-$880^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Solar cells with four different types were fabricated with/without oxygen injection and PSG removal. Solar cell that injected oxygen during the drive-in process and removed PSG after doping process showed the 17.9 % conversion efficiency which is best in this study. This solar cells showed $35.5mA/cm^2$ of the current density, 632 mV of the open circuit voltage and 79.5 % of the fill factor.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.11-17
• /
• 2013

Silicon nitride($SiN_x:H$) deposited by radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) is commonly used for anti-reflection coating and passivation in crystalline silicon solar cell fabrication. In this paper, characteristics of the deposited silicon nitride was studied with change of working pressure, deposition temperature, gas ratio of $NH_3$ and $SiH_4$, and RF power during deposition. The deposition rate, refractive index and effective lifetime were analyzed. The (100) p-type silicon wafers with one-side polished, $660-690{\mu}m$, and resistivity $1-10{\Omega}{\cdot}cm$ were used. As a result, when the working pressure increased, the deposition rate of SiNx was increased while the effective life time for the $SiN_x$-deposited wafer was decreased. The result regarding deposition temperature, gas ratio and RF power changes would be explained in detail below. In this paper, the optimized condition in silicon nitride deposition for silicon solar cell was obtained as 1.0 Torr for the working pressure, $400^{\circ}C$ for deposition temperature, 500 W for RF power and 0.88 for $NH_3/SiH_4$ gas ratio. The silicon nitride layer deposited in this condition showed the effective life time of > $1400{\mu}s$ and the surface recombination rate of 25 cm/s. The crystalline silicon solar cell fabricated with this SiNx coating showed 18.1% conversion efficiency.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.175-181
• /
• 2009

The solution polymerization was conducted to synthesize pressure sensitive adhesive for polarizer film using acrylic monomers. 2-Ethylhexyl acrylate, butyl acrylate, acrylic acid were used as acrylic monomers, benzoyl peroxide as initiator, ethyl acetate as solvent. The ratio of monomers was 2-ethylhexyl acrylate: butyl acrylate: acrylic acid = 25:50:3.6 reflecting $-40^{\circ}C$ of glass transition temperature in the pressure sensitive adhesive. The amount of initiator was determined as 0.09% to monomer considering wetting power and initial tackiness. The ratio of monomer to solvent was determined as 1:1.7 considering wetting power and transmissivity. The transmissivity of pressure sensitive adhesive increased with decreasing both viscosity and molecular weight due to reducing of refractive index by low entanglement between molecules. In the measurement of pot life, it was found that the storage stability was good at 1:1.7 of monomer: solvent without large change of viscosity during 200 min.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.4
• /
• pp.307-314
• /
• 2013

Infrared optical systems are operated at low temperature and vacuum (LT-V) condition, whereas the assembly and alignment are performed at room temperature and non-vacuum (RT-NV) condition. The differences in temperature and pressure between assembly/alignment environments and operation environment change the physical characteristics of optical and opto-mechanical parts (e.g., thickness, height, length, curvature, and refractive index), and the resultant optical performance changes accordingly. In this study, using input relay optics (IO), among the components of the Immersion GRating INfrared Spectrograph (IGRINS) which is an infrared spectrograph, a simulation based on the physical information of this optical system and an actual experiment were performed; and optical performances in the RT-NV, RT-V, and LT-V environments were predicted with an accuracy of $0.014{\pm}0.007{\lambda}$ rms WFE, by developing an adaptive fitting line. The developed adaptive fitting line can quantitatively control assembly and alignment processes below ${\lambda}/70$ rms WFE. Therefore, it is expected that the subsequent processes of assembly, alignment, and performance analysis could not be repeated.

• Journal of the Korean Chemical Society
• /
• v.61 no.6
• /
• pp.346-351
• /
• 2017

This study was planned considering the chain length, hydrophilicity, and hydrophobicity of the additives to be used in the polymerization, while various ophthalmic lenses that use various additives with similar water contents were manufactured before their optical and physical properties were compared and analyzed. With regard to the additives required for manufacturing high-, medium-, and low-water content lens groups, HEA (hydroxyethyl acrylate), PVP (polyvinylpyrrolidone), and NMV(N-methyl-N-vinylacetamide) were used as additives for preparing the high-water content lens group, HEMA(2-hydroxyethyl methacrylate), HPMA(hydroxypropyl methacrylate) and BD(1,4-butanediol) were used for the medium-water content lens group. For the low-water content lens group, BMA(buthyl methacrylate), BDDA(1,4-butanediol diacrylate), and Bis-GMA(bisphenol A glycerolate diacrylate) were used, respectively. The average water content of HEA was 40.14%; that of PVP, 39.63%; and that of NMV, 40.52%. The mean of water content was 35.92% for HEMA, 35.74% for BD, and 34.62% for HPMA. For the low-water content lens group, the mean of water content was 26.69% for BMA, 27.76% for BDDA, and 26.14% for Bis-GMA. With regard to the results of the water content measurement using a moisture analyzer, the average water content of the high-water content lens group was 41.34% for HEA, 42.62% for PVP, and 42.73% for NMV. Finally, for the low-water content lens group, the average water content was 28.62% for BMA, 28.82% for BDDA, and 28.32% for Bis-GMA. The measurements of the water contents of the lenses using the two methods showed that the water content and refractive index of the lenses were similar in all the lens groups. The measurements of the contact angles, however, showed a different wettability value for each lens with a similar water content. Also, the change tendency of the lens curvature according to the change of time showed that the change amount became larger and the recovery time became longer from the lens samples with a lower water content to those with a higher water content. Based on these results that will be helpful for the study of ophthalmic lenses.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1307-1319
• /
• 2018

As interests in the air pollution increases, many kinds of researches are underway on the reduction of air pollutants. The removal of nitrogen oxides from the emission gas of diesel vehicles using urea solution has shown a great effect. The quality of urea solution is strictly defined by domestic law, but the increase of impurities in urea solution reduces the effect of reducing nitrogen oxides. Therefore, in this study, the change of physical properties of urea solution was analyzed after heating the urea solution for a certain temperature and time. Also, the changes of physical properties of urea solution were analyzed according to kinds of storage container and temperature for storing the urea solution. After heating the urea solution for a certain period of time, the biuret content in urea solution increased and the content of urea decreased. As the urea content decreased, both density and refractive index decreased. In the storage stability test carried out at a constant temperature with iron and PET containers, no change in physical properties was observed.

• Journal of Software Assessment and Valuation
• /
• v.16 no.2
• /
• pp.117-125
• /
• 2020

In this paper, when both the refractive index grating and the gain grating exist in a 1.55um DFB laser with two cleaved mirror facets, when the phase of ρ_l is fixed to 0 and the phase of ρ_r is changed to -π/2, π, π/2, 0, the change in frequency and oscillation gain was theoretically analyzed. In the case of δL<0, the oscillation gain required for lasing is the lowest and the most stable frequency operation is obtained in the case of (ρ_l phase=0, ρ_r phase=0) and κL=10, when κL is varied from 0.1 to 10. In the case of δL>0, when (ρ_l phase=0, ρ_r phase=π) and κL=10, the oscillation gain required for lasing is the lowest and the difference between the oscillation gains of the higher-order modes is large so that the most stable frequency operation is obtained.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1389-1395
• /
• 2009

Generally, it takes a long time to purify wood vinegar, and it contains toxic compounds such as tar, methanol, phenol and benzopyrene. To reduce the toxicity of wood vinegar itself, we have developed a new purification method of wood vinegar using an oxidation-cohesion reaction and distillation with an active carbon. We have investigated the physico-chemical change (pH, specific gravity, refractive index and dissolved tar), the change of amount of toxic compounds (carbonyl group, phenol, benzopyrene and residual solvents) and organic acids (formic acid (FA), acetic acid (AA), propionic acid (PA)) of the purified wood vinegar under the long term and accelerated storage conditions. Also, we have evaluated the effect of the purified wood vinegar on hair growth using an alopecia model of C57BL/6 mice. As a result, we could find out that the purified wood vinegar was stable and remained without decay under the storage conditions and benzopyrene, a carcinogenic agent, was not detected in the purified wood vinegar. After topical treatment of the purified wood vinegar solution or minoxidil (MXD) for 2 weeks to dorsal skin, the hair regrowth of the mice accelerated faster than that of the control, with no clinical signs. In conclusion, we could suggest a guideline for quality control of process to reduce the toxic compounds in wood vinegar and it might be a useful hair growth promoter in the treatment of baldness or alopecia.