• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.3
• /
• pp.381-385
• /
• 1998

Chemical components of Perillar semen and physico-chemical properties o Perillae semen oil were analyzed for the use as an edible oil. The proximate compositions of Perillae semen were 7.5% moisture, 33.2% crude fat, 16.3% crude protein, 2.8% crude ash, 6.5% crude fiber, and 33.7% nitrogen free extract. The major amino acids of Perillae semen were glutamic acid(66.9mg%), aspartic acid (32.5mg%), histidine(21.6mg%), and phenylaanine (20.1mg%). The ratio of essential/total amino acid was 41.3%. The physico-chemical properties of the seed oil were 0.915 specific gravity, 1.4808 refractive index, 3.6 acid value, 181.7 iodine value, and 194.0 saponification value. Composition of major lipid of the oil fractionated by silicic acid chromatography was 94.2% neutral lipids and 5.8% polar lioids. The major fatty acids of the oil were linolenic, linoleic and oleic acid. Neutral lipids consisted of 59.9% linolenic acid, 15.6% oleic acid, 6.6% palmitic acid, and 2.5% stearic acid. Polar lipids consisted of 58.5% linolenic acid, 18.1% linoleic acid, 12.7% oleic acid, 7.7% palmitic acid, and 3.0% stearic acid.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.115-128
• /
• 2004

In this study, optical and mechanical properties were investigated with 4 kinds of commercial dental enamels. As a result of EDS analysis $SiO_2,\;Na_{2}O,\;Al_{2}O_3\;and\;K_{2}O$ were the main components of commercial dental enamels. In case of H specimen, content of $SiO_2\;and\;K_2O$ were more than that of another specimens. Starting powder and fired specimens were glass ceramics which were consist of amorphous phase and leucite (crystalline) phase. Crystallization did not occurred during firing process, since the XRD peak intensity was similar between starting powder and fired specimens. As a result of differential thermal analysis, $T_g$ and crystalline temperature was varied with composition in the range of $548\sim576^{\circ}C$ and $735\sim780^{\circ}C$ respectively. 0.5mm thickness dental enamel specimens showed sufficient translucent properties. However, transmittance and reflectance were lower than 5% result from scattering due to the refractive index difference between glass and crystalline phase. 3 point bending strength was in the range of 73.9$\sim$101.8MPa which was similar or slightly higher than enamel of natural teeth and Vickers hardness was higher than enamel of natural teeth more than 100.

• Journal of the Korean Home Economics Association
• /
• v.24 no.1
• /
• pp.59-64
• /
• 1986

The contents of proximate components of the polished adn unpolished Job's tears, Coix agrestis, were determined. And also the phisical and the chemical properties of fatty acids composition and the oxidative rancidity of the crude oil extracted from Job's tears were examined. RESULTS : 1.The contnets of moisture, total ash, crude protein, crude fat, and carbohydrate in Job's tears were shown to be about 9.2%, 2.1~5.0%, 19.5~20.8%, 3.7~7.2%, 60.7~67.0%. 2. The average values of specific gravity, refractive index iodine value, saponification value, acid value of the crude oil extracted from Job's tears were 0.917~0.920, 1.47574, 107~111, 198~199, 1.3~2.0, respectively. 3. The fatty acids composition in the crude Job's tears oil showed oleic acid 48.97~49.97%, linoleic acid 37.33~36.16%, palmitic acid 13.70~13.87%. 4. Generally, the peroxide values and thiobarbituric acid values of the Job's tears oils and control during 40 storage days at 40±1℃ showed very low increase. After 32 days, the peroxide values and TBA values of soybean oil showed higher than those of the Job's tears oils. Conclusively, the Job's tears oils were shown to be more stable than the soybean oil.

• Korean Journal of Food Science and Technology
• /
• v.9 no.4
• /
• pp.284-290
• /
• 1977

The lipid components, fatty acid compositions, physical and chemical characteristics of crude oil in Amorpha fruticosa seed were determined and proximate compositions of it were also analyzed. The results were summarized as follow: 1) The proximate composition showed moistrue to be 10.14%, crude protein to be 21.77%, crude fats to be 12.73%, carbohydrates to be 51.75% and crude ash to be 3.61%. 2) Specific gravity, refractive index, smoke point and titer of the crude oil were $0.925\;(15/15^{\circ}C)$, $1,477(15^{\circ}C)$, $175^{\circ}C$ and $14.8^{\circ}C$, respectively. 3) Iodine, saponification, acid, ester value and unsaponifiable content of the crude oil were 144, 182, 2.9, 179 and 5.17%, respectively. 4) Lipid components were separated by TLC and quantitatively determined by TLC scanner to give 75% triglycerides, 14% esterified sterols, 3.08% phospholipids, 4.4% free sterols and 3.77% free fatty acids. 5) Fatty acid compositions were quantitatively determined by GLC to give 76.21% linoleic acid, 9.92% palmitic acid, and 5.07% stearic acid as the main components, oleic, linolenic, palmitoleic and arachidic acid were presented in small quantities.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.1
• /
• pp.55-62
• /
• 2006

Clinical evaluation of the Closed-view autorefractor and Open-view autorefractor was performed to examine validity and repeatability compared with subjective refraction. Measurements of refractive error were performed on 126 eyes of 65 subjects (aged $26{\pm}7.5$ years) subjectively noncycloplegic. Intersession repeatability of the Closed-view and Open-view were also assessed on all 65 subjects together with Intersession repeatability on 7 to 14 days intervals. Spherical powers and spherical equivalent values of subjective refraction and autorefractions by Closed-view and Open-view were analyzed by paired T-test. The mean spherical powers of subjective refraction, Closed-view and Open-view were determined to be $-2.125{\pm}2.155D$, $-2.146{\pm}1.907D$, $-2.117{\pm}2.121D$, respectively. The mean spherical equivalent values of subjective refraction, Closed-view and Open-view were determined to be $-2.362{\pm}2.204D$, $-2.391{\pm}1.967D$, $-2.366{\pm}2.162D$, respectively. The results showed that the refractive errors as measured by the Closed-view and Open-view were found to be similar to the subjective refraction in all components.

• Korean Journal of Optics and Photonics
• /
• v.29 no.6
• /
• pp.268-274
• /
• 2018

In this study we suggest a humidity-sensitive color sensor using a one-dimensional photonic crystal and Hong Kong University of Science and Technology-1 (HKUST-1), which is a metal-organic framework (MOF) substance. One-dimensional photonic crystals have a photonic band gap, due to a periodic refractive-index change, and block and reflect light components in a specific wavelength band. The refractive index of HKUST-1 differs in dry and humid environments. Herein we designed a sensor using the presence of the photonic band gap, with FDTD simulation. As a result of optical analysis, the color conversion of the reflected light was superior to the color conversion of the transmitted light. When the center wavelength of the photonic band gap was 550 nm, the maximum peak value of the wet environment increased by a factor of about 9.5 compared to the dry environment, and the color conversion from achromatic to green was excellent as a sensor. The results of this study suggest the application of MOF materials to moisture sensors, and the nanostructure design of MOF materials will expand the applications to industrial devices.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.469-479
• /
• 2014

N-RTK(Network based RTK) methods are able to improve the accuracy of GNSS positioning results through modelling of the distance-dependent error sources(i.e. primarily the ionospheric and tropospheric delays and orbit errors). In this study, the comparison of the TTFF(Time-To-Fix-First ambiguity), accuracy and discrepancies in horizontal/vertical components of N-RTK methods(VRS and FKP) with the static GNSS at 20 Unified Control Stations covering Incheon metropolitan city area during solar storms(Solar cycle 24 period) were performed. The results showed that the best method, compared with the statics GNSS survey, is the VRS, followed by the FKP, but vertical components of both VRS and FKP were approximately two times bigger than horizontal components. The reason for this is considered as the ionospheric scintillation because of irregularities in electron density, and the tropospheric scintillation because of fluctuations on the refractive index take the place. When the TTFF at each station for each technique used, VRS gave shorter initialization time than FKP. The possible reasons for this result might be the inherent differences in principles, errors in characteristics of different correction networks, interpolating errors of FKP parameters according to the non-linear variation of the dispersive and non-dispersive errors at rover when considering both domestic mobile communication infra and the standardized high-compact data format for N-RTK. Also, those test results revealed degradation of positing accuracy, long initialization time, and sudden re-initialization, but more failures to resolve ambiguity during space weather events caused by Sunspot activity and solar flares.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.208-214
• /
• 2019

The glass of $BaO-GeO_2-La_2O_3-ZnO$ system with a transmittance of more than 75 % at mid-wave infrared (MWIR) region in the range of $3{\mu}m$ to $5{\mu}m$ is manufactured and its property is evaluated. After selecting construction that can melt glass through flow button test, $BaO-GeO_2-La_2O_3$ system where 10 mol%, 20 mol% of ZnO were added respectively were melted at $1350^{\circ}C$ for 1 hour and $BaO-GeO_2-La_2O_3$ system of glass was manufactured. Among them, with 20 mol% of ZnO, 16 mol% BaO-56 mol% $GeO_2-8mol%$ $La_2O_3-16mol%$ ZnO system of glass was found to has less than $660^{\circ}C$ of glass transition temperature, more than 1.70 of refractive index, and more than 530 of knoop hardness. Therefore, it is concluded that glass of $BaO-GeO_2-La_2O_3-ZnO$ system of glass with 20 mol% ZnO has good melting conditions at low temperatures and excellent optical properties, thus, can be utilized for special optical materials field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.353-359
• /
• 2018

In this study, the performance between subjective refraction and open-field/closed view autorefraction was estimated. We measured the refractive error of early adults aged 18 to 20 years who did not have eye disease. The differences between measurements obtained by subjective refraction and open-field autorefraction for SE, J0, and J45 were $-0.13{\pm}0.53D$ (p=0.17), $+0.33{\pm}0.68D$ (p=0.01), and $+0.13{\pm}0.68D$ (p=0.26), respectively, with only J0 differing significantly. The differences between the measurements of subjective refraction and closed-view autorefraction for SE, J0, and J45 were $-0.30{\pm}0.42D$ (p=0.00), $+0.30{\pm}0.71D$ (p=0.02), and $-0.02{\pm}0.63D$ (p=0.88), respectively, with only SE and J0 differing significantly. The coefficient of accuracy for SE, J0, and J45 components of open-field and closed-view autorefraction were 1.04, 1.33, and 1.34 and 0.83, 1.40, and 1.24, respectively. It is possible to predict the refractive error, which is necessary when deciding on subjective refraction, by measuring the objective refraction of open-field/closed view autorefractors.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1171-1171
• /
• 2001

Quantitative analysis is an important requirement in exploration, mining and processing of minerals. There is an increasing need for the use of quantitative mineralogical data to assist with bore hole logging, deposit delineation, grade control, feed to processing plants and monitoring of solid process residues. Quantitative analysis using X-Ray Powder Diffraction (XRD) requires fine grinding and the addition of a reference material, or the application of Rietveld analysis to XRD patterns to provide accurate analysis of the suite of minerals present. Whilst accurate quantitative data can be obtained in this manner, the method is time consuming and limited to the laboratory. Mid infrared when combined with multivariant analysis has also been used for quantitative analysis. However, factors such as the absorption coefficients and refractive index of the minerals requires special sample preparation and dilution in a dispersive medium, such as KBr to minimize distortion of spectral features. In contrast, the lower intensity of the overtones and combinations of the fundamental vibrations in the near infrared allow direct measurement of virtually any solid without special sample preparation or dilution. Thus Near Infrared Spectroscopy (NIR) has found application for quantitative on-line/in line analysis and control in a range of processing applications which include, moisture control in clay and textile processing, fermentation processes, wheat analysis, gasoline analysis and chemicals and polymers. It is developing rapidly in the mineral exploration industry and has been underpinned by the development of portable NIR spectrometers and spectral libraries of a wide range of minerals. For example, iron ores have been identified and characterized in terms of the individual mineral components using field spectrometers. Data acquisition time of NIR field instruments is of the order of seconds and sample preparation is minimal. Consequently these types of spectrometers have great potential for in-line or on-line application in the minerals industry. To demonstrate the applicability of NIR field spectroscopy for quantitative analysis of minerals, a specific example on the quantification of lateritic bauxites will be presented. It has been shown that the application of Partial Least Squares regression analysis (PLS) to the NIR spectra can be used to quantify chemistry and mineralogy in a range of lateritic bauxites. Important, issues such as sampling, precision, repeatability, and replication which influence the results will be discussed.