• Journal of the Optical Society of Korea
• /
• 제7권3호
• /
• pp.156-159
• /
• 2003

Permanent structure of photoinduced singlemode waveguide in optical fluoride glasses was demonstrated using the self-channeled plasma filament excited by a femtosecond (110 fs) Ti:sapphire laser ($λ_p$ = 800 nm). The photoinduced refractive index modification in ZBLAN glasses reached a length of approximately 10 - 15 mm from the input surface of the optical glass with the diameters ranging from 5 to 8 ${\mu}{\textrm}{m}$ at input intensities more than l.0 ${\times}$ $10^{12}$ W/$\textrm{cm}^2$. The graded refractive index profiles were fabricated to be a symmetric form from the center of an optical fluoride glass and a maximum value of refractive index change (ㅿn) was measured to be l.3${\times}$$10^{-2}$. The beam profile of the output beam transmitted through the modified region showed that the photoinduced refractive index modification produced a permanent structure of singlemode waveguide.

• 폴리머
• /
• 제28권6호
• /
• pp.545-550
• /
• 2004

광조사에 의하여 발색단 분해를 유도함으로써 고분자의 굴절률을 변화시켜 공중합체 박막의 굴절률을 조절하고, FTIR과 UV/Vis 분광 실험으로 굴절률에 영향을 미치는 구조의 변화를 조사하였다. 광표백에 따라 공중합체 박막의 굴절률이 작아지는 것은 광반응에 의하여 발색단 내 C=C 이중결합이 끊어져 고분자의 편극률이 작아지기 때문이다. 입사되는 빛의 전기장 방향에 의존하는 선택적인 광반응에 의하여 필름 면에 평행한 방향으로 존재하는 발색단이 먼저 분해가 되면서 고분자 필름 면에 평행한 방향의 굴절률이 수직한 방향에서 보다 더 급격하게 감소하였다. 이와 같은 고분자 박막 내의 굴절률 차이를 편광 ATR-FTIR 실험에서 얻어지는 고분자 특성 피크의 변화를 조사하여 증명하였다.

• Current Photovoltaic Research
• /
• 제3권3호
• /
• pp.91-96
• /
• 2015

Optical modeling and characterization of transparent dye-sensitized solar cells (DSC) are presented to design and estimate DSC devices numerically. In order to model the inhomogeneous active layer of DSC, the porous structure of titanium oxide ($TiO_2$) and dye mixture, we prepared films consisting of layer by layer of the DSC's basic materials sequentially, and characterized the optical parameters of the films with the effective refractive index, which was extracted from the transmittance and reflectance measurements in ultra violet to near infra-red range. By using the effective refractive index, we made the optical model for DSC, and demonstrated that the optical model based on effective refractive index can be used to design and evaluate the performance of transparent-type DSC modules.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.120-123
• /
• 2002

In this study it had an excellent optical characteristic, it followed in the creation rate and the refractive index regulation to the ease. Chalcogenide produced the $As_{45}Se_{45}Te_{10}$ thin film and the $MgF_{2}$ thin film. It measured thin film plan simulation, and the thin film has a 1 -dimensional photonic band gap. The chalcogenide $As_{45}Se_{45}Te_{10}$ thin film was measured with the fact that it has a high refractive index (2.6~2.9). The $As_{45}Se_{45}Te_{10}$ and $MgF_{2}$ thin film, have a high refractive index and a low refractive index, it used a simulation and planed period 5-pairs structure, the result was from 500nm to 800nm. It will be able to confirm the characteristic which most of the incidence light reflects, the He-Ne (632.8nm) laser was irradiated in the thin film which stabilized the thin film. $As_{45}Se_{45}Te_{10}$ (high refractive index layer: H) and $MgF_{2}$ (low refractive index layer: L) results which plans the thin film with glass/LHLHLLHLHL/air structure, 632.8nm against transmitance, increased a lot. An application possibility with the filter against a specific wave length was confirmed.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.9-12
• /
• 2016

특정 광 파장 영역대역에서 광 반사율을 갖는 다층 박막을 DC펄스 스퍼터링 공정으로 제작하기 위하여 공정변수가 다층 박막의 광학 특성에 미치는 영향이 연구되었다. 다층 박막 필름을 제작하기위한 시뮬레이션이 이루어졌으며, DC펄스 스퍼터링 공정을 이용한 저 굴절률의 $SiO_2$와 고 굴절률의 $TiO_2$ 박막의 광학 특성에 미치는 공정 변수 파라미터가 연구되었다. DC펄스 스퍼터링 파워 2kW, 아르곤 가스 200sccm(standard cubic centimeter per minute)기준조건에서 산소가스 비율 12% 범위에서 제작한 $SiO_2$박막은 굴절률 1.46이었고 산소가스 1% 비율에서 제작한 $TiO_2$박막은 굴절률 2.27이었다. 이들 박막으로 구성된 고 굴절률 박막/저 굴절률 박막/고 굴절률 박막의 3층 다층 박막 구조의 광학설계 시뮬레이션 결과와 측정된 광 반사율 특성결과는 파장 대역에 걸쳐 유사한 경향이 있는 것으로 측정되었다. 근적외선 780nm에서 1200nm파장 대역 영역에서 광 반사율 45%이상의 성능을 갖는 다층 박막 필름을 제작할 수 있었고 근적외선 차단 기능 박막으로 사용될 것으로 기대된다.

• 한국재료학회지
• /
• 제20권7호
• /
• pp.370-373
• /
• 2010

In fabricating plasma display panels, the photolithographic process is used to form patterns of barrier ribs with high accuracy and high aspect ratio. It is important in the photolithographic process to control the refractive index of the photosensitive paste. The composition of this paste for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system, including additives of alkali oxides and rare earth oxides. In this work, we investigated the density, structure and refractive index of glasses based on the $B_2O_3-SiO_2-Al_2O_3$ system with the addition of $Li_2O$, $K_2O$, $Na_2O$, CaO, SrO, and MgO. The refractive index of the glasses containing K2O, Na2O and CaO was similar to that of the [BO3] fraction while that of the SrO, MgO and Li2O containing glasses were not correlated with the coordination fraction. The coordination number of the boron atoms was measured by MAS NMR. The refractive index increased with a decrease of molar volume due to the increase in the number of non-bridging oxygen atoms and the polarizability. The lowest refractive index (1.485) in this study was that of the $B_2O_3-SiO_2-Al_2O_3-K_2O$ glass system due to the larger ionic radius of $K^+$. Based on our results, it has been determined that the refractive index of the $B_2O_3-SiO_2-Al_2O_3$ system should be controlled by the addition of alkali oxides and alkali earth oxides for proper formation of the photosensitive paste.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.300-301
• /
• 2004

Effect of refractive index difference between core and cladding on the characteristics of a vertical directional coupler using double sided deep ridge waveguide structure is investigated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.195-195
• /
• 2010

In recent years, Anodic aluminum oxide(AAO) has become popular and attractive materials. It can be easily fabricated and self-organized pore structures. It has been widely used as a biosensor membrane, photonic crystal for optical circuit and template for nanotube growth etc. In previous papers, the theory was developed that AAO shows anisotropic optical properties, since it has anisotropic structure with numerous cylindrical pores. It gives rise to the anisotropy of the refractive index called as birefringence. It can be used as conventional polarizing elements with high efficiency and low cost. Therefore, we would like to compare the theory and experimental results in this study. One method which can measure effective refractive index of thin film is the prism coupling technique. It can give accurate results fast and simply. Furthermore, we can also measure separately the refractive index with different polarization using polarization of the laser (TE mode and TM mode). We calculated the effective refractive index with effective medium approximations (EMAs) by pore size in the SEM image. EMAs are physical models that describe the macroscopic system as the homogeneous and typical method of all mean field theories.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.39-44
• /
• 2015

Optical characteristics including the radiant flux and viewing angle of UV LEDs were investigated according to both silicone encapsulants with different refractive indexes and lens shapes. Lead frame was fabricated using the enhanced heat dissipation characteristics with a heat slug structure and the reflector based on EMC(Epoxy Mold Compound) material. Four types of lens shapes were designed and their optical characteristics depending on the refractive index of silicone encapsulants were evaluated. The maximum radiant flux can be achieved when the height of lens are 1.32mm and 1.08mm for silicone encapsulants with low and high refractive indexes, respectively. Depending on the encapsulating method, the viewing angle changes from $148.9^{\circ}$ to $130.2^{\circ}$ for low refractive index and from $145.3^{\circ}$ to $136.8^{\circ}$ for high refractive index. As a result, it is found that the optical characteristics of UV LEDs can be controled through both encapsulating method and the refractive index of encapsulants.

• 전기전자학회논문지
• /
• 제1권1호
• /
• pp.156-163
• /
• 1997

본 논문은 레이저를 이용한 지상 광통신에 교란대기가 미치는 영향을 해석하기 위한 것으로, 대기의 교란은 밝은 날이나 흐린 날에도 존재한다. 대기 교란으로 인하여 전파해 가는 광선은 빔의 방황, breathing, 신틸레이션이 발생하며 이는 광통신 시스템 성능의 저하를 가져온다. 이를 해석하기 위하여 대기굴절률 구조상수 측정 시스템 및 레이저 다이오드를 이용한 지상 광통신 시스템을 설계하였고. 이를 이용하여 대기의 굴절률 구조상수에 따른 지상 광통신 시스템의 비트 오류률을 이론적으로 유도하고 실험하였으며, 연집 오류와의 관계를 실험을 통해 구하였다.