• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.905-909
• /
• 2002

Characteristics of reflective LCDs, which have gained a lot of notice in recent years, rely largely on optical design of circular polarizers and the quarter-wave plates, as a component. Important design includes wavelength dispersion, viewing angle, uniformity of display and matching of refractive index. Our work has contributed to improving performance of reflective LCDs by enhancing the characteristics of polymer film using stretching and optical lamination technologies. To design that offers higher contrast and wider viewing angle, we have discovered that it is necessary to control viewing angle variation of the polarizing axis in order to compensate for the viewing angle of the polarizing film as well as the optical anisotropic properties of liquid crystal. Applying this technology to circular polarizers used for reflective LCDs enables design of wide viewing angle circular polarizers. In order to realize higher contrast for reflective LCDs, it is also necessary to design other optical materials including polarizing films. For design of hybrid optical film, it is particularly necessary to reduce surface reflection and interface reflection. This paper also reports our findings concerning this topic.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.139-147
• /
• 2017

In this study, interesting area of development is retro-reflective thin film and then slitting to form retro-reflective material to be conbined with other fibers to form having retro-reflective characteristics, which slitting yarn can then be to provide fabrics. Glass beads are microscopic spherical size with diameters ranging from several microns to several millimeters. Applying the effects of optical property, glass beads are consumed for road safety used to make traffic signs, safety clothing and others. Glass beads retro-reflective films can be turned into slit yarns through slitting yarn process. The slit yarns can be combined into textiles using diverse methods such as weaving to provide a fabric having retro-reflective characteristics. Lightness and Luminance was increased with decreasing of interval of slit yarn in the fabric. Also, the hue is shifted greenish and bluish with interval of slit yarn.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.53-62
• /
• 2011

Heliostat in the tower type solar thermal power plant is a sun tracking mirror system to reflect the solar energy to the receiver and the optical performance of it affects to the efficiency of whole power plant most significantly. Thus a proper design of structure of the heliostat reflective surface could be the most important step in the construction of such power plant. The work presented here is a design of structure of optical surface of heliostat, which will be used in 200kW solar thermal power plant. The receiver located at 43(m) high from ground in tower has $2{\times}2$(m) rectangular shape. We first developed the software tool to simulate the energy concentration characteristics of heliostat using the ray tracing technique. Then, the shape of heliostat reflective surface is designed with the consideration of heliostat's energy concentration characteristics, production cost and productivity. The designed heliostat's reflective surface has a structure formed by canting four of $1{\times}1$(m) rectangular flat plate mirror facet and the center of each mirror facet is located on the spherical surface, where the spherical surface is formulated by the mirror facet mounting frame.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.23 no.4
• /
• pp.430-439
• /
• 2016

Purpose: The purpose of this study was to contribute to the development of an efficient teaching-learning method by analyzing effects of writing reflective journals on meta-cognition and problem solving ability in nursing students in education applying blended learning for fundamental nursing skills. Methods: The research design was a one-group pretest-posttest design, done to assess changes in meta-cognition and problem solving ability. Participants were 63 nursing students taking the fundamental nursing skills course at one college in Gyeonggi Province. The course was offered from March 21 to June 3, 2016. Data were collected using pre and post tests given before and after writing of reflective journals in blended learning. Data were analyzed using t-test, ANOVA, $Scheff{\acute{e}}^{\prime}s$ test and paired t-test with SPSS Statistics version 20.0. Results: The results of this study show that scores for meta-cognition and problem solving ability of these students were all above average. There was a statistically significant difference in meta-cognition between pre and post writing of reflective journals but not for problem-solving ability. Conclusion: The findings indicate that writing a reflective journal in blended learning is an efficient teaching-learning method to improve meta-cognition in nursing students.

• Korean Journal of Optics and Photonics
• /
• v.34 no.6
• /
• pp.248-260
• /
• 2023

A 0.5-numerical-aperture (NA) refractive-reflective objective, composed of a low-NA refractive and a reflective focal reducer, is designed. A 0.25-NA Lister objective is used for the refractive. A two-spherical-mirror system, corrected for spherical aberration, coma, and astigmatism is used for the reflective focal reducer. In spite of high NA, the refractive-reflective objective has an 18-mm working distance and improved imaging performance, compared to the 0.25-NA Lister objective.

• Human Ecology Research
• /
• v.61 no.3
• /
• pp.493-503
• /
• 2023

Since ISO 20471 regulations(2013) were enacted, high-visibility clothing made of fluorescent fabric and retroreflective materials has been standardized to distinguish the wearers from the surrounding background in a dark place and to protect them. Accordingly, we made high-visibility safety clothing based on the international standards, and examined the positions of the retro-reflective materials on the attached sites to evaluate the suitability of the positions, by 3 types of safety clothing and the body regions when the wearers work or move. Two retro-reflective films of 5cm-horizontal lines were attached to the front/back of the upper-wear, and the lower-wear. Vertical lines were attached from the shoulder to the horizontal waistline. To analyze the motion in 3-dimension, we took pictured infrared-reflective markers on the retro-reflective film covered with yellow-tape on the front-side when 6 subjects wearing experimental garments performed 6 types of motions. According to the metronome tempo, the motions were performed for 30 seconds and repeated 6 motions ①~⑥ by 3 experimental clothing. Among the 6 motions, significant differences in the appearance rate of the markers by body region during the motions were found in 5 types except for motion ③. Significant differences by the post-hoc test were shown in motions ④ and ⑥ as well. Therefore, for high-visibility safety clothing, it is necessary to anticipate the worker's motion and consider the attaching position of the retro-reflective material. It is considered desirable to attach the retro-reflective materials to several places where the clothing is hard to wrinkle.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.70-78
• /
• 1995

In order to implement broadband RAM's(Radar Absorbing Materials) made up of multiple dielectricl layers, the design variables such as the dielectrci constaints, the depths and the loss tangents of dielectric are optimized. The wave impedances regarding the reflective wave are found in dielectrics, input impedances and reflection coefficients with multiple dielectric layers are derived from the transmission line circuit theory. Finally, minimum average reflective power and optimum design variables are obtained by applying the numerical technique, called modified Powell method. In case of four dielectric layers with inequality constraints in design variables, a quite favourable and feasible result with the total depth of 1.1 cm, the average reflective power of 0.85% over the bradband frequency range is obtained for a specific example.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.3 s.25
• /
• pp.89-99
• /
• 1987

The purpose of this present study is not only to investigate mutal relationship between the preference of clothing design and the nature of Reflectiveness-Impulsiveness, but to offer clothing design for desirably developing of child, especially of preschool children. And the practical research was performed for 166 preschool children who are in kindergarten located in Seoul and are selected according to their sex and social class. This study used Kagan's MFFT and Personality Inventory of Hwang Eung-Yeon for the test of Reflectiveness-Impulsiveness, while for the preference of clothing design used the photo deck which is showed to children. The data analysis was based on frequency, percentage, mean, standard deviation, chi-square ($x^2$) test, t-test, F-test, and Duncan's Multiple Range Test. It can be concluded that girls rather than toys, high class children rather than middle or low class children were more reflective as a general trend. The relationship between the preference of clothing design and the nature of Reflectiveness and Impulsiveness is as follows : 1. In color, reflective boy liked blue series and reflective girl liked pastel coloring series, while they disgusted red series and non-coloring series. The group of impulsiveness liked red series, while they disgusted non-coloring series. 2. In color combination, group of reflectiveness liked similar color, while group of impulsiveness liked contrasting color. 3. In texture, group of reflectiveness liked soft and shiny texture, while they disgusted thick and rough texture. Also Group of impulsiveness liked soft texture. 4. In pattern, reflective boy liked lettering pattern and reflective girl liked flower pattern, while she disgusted lettering pattern. Impulsive boy liked stripe pattern and limpulsive girl liked flower pattern. 5. In pattern size, group of reflectivenss liked small size, while group of impulsiveness liked large one. 6. In style, group of reflectiveness liked formal style.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.48-51
• /
• 2000

In this work, we proposed a reflective antiferroelectric liquid crystal display (AFLCD) using a half-wave cell whose inplane tilt angle is $22.5^{\circ}$. To check the validity of our design, we fabricated a reflective half-wave AFLC cell of which inplane tilt angle is $24.9^{\circ}$, and measured VIS reflection spectra, contrast ratio and response time. In the results, the half-wave AFLC cell in the reflective configuration exhibits high brightness, high contrast ratio of 20:1, and fast response time of $700{\mu}s$.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.65-70
• /
• 2008

The shape and the material of a reflective sheet affect the amount and the range of retroreflection on incident angle of light, significantly. In this study, the method to determine the shape and the material of the reflective sheet is introduced for the maximum retroreflection. Since the microprism shape with an equilateral triangle base has been used widely, the shape optimization of the microprism shape is carried out. The path of the light within the prism is geometrically calculated to find the relationship between incoming and outgoing light to and from a microprism. The optimal shape of a microprism found by the simulation has almost same figure with the one being used in industry for the maximum retroreflection. It is also found that the refraction index of the reflective sheet is another parameter to control for maximum retroreflection and the range of retroreflection.