• 펄프종이기술
• /
• 제46권2호
• /
• pp.35-45
• /
• 2014

Confocal Reflection Microscopy (CRM) was applied to investigate external fibrillation of different types of fibers such as Kajaani reference fiber, Whatman filter fiber, thermomechanical pulp (TMP), and recycled TMP fiber. It was confirmed that the CRM images are created from surface structures of the fiber cell wall. Confocal Laser Scanning Microscopy (CLSM) captured overall shape of the fiber, but minute details of the surface of the fiber were missed. CRM captured the minute details of the fiber surface. From the CRM and CLSM images, it was observed that the CRM images mainly appeared on the fiber surfaces. External fibrillation of the fiber occurs at the fiber surface, not inside the cell wall. Thus, it was concluded that investigation on the external fibrillation of the fiber was possible by utilizing CRM images. A direct qualtitative and quantitative method for analysis of external fibrillation of fiber was demonstrated by utilizing surface area to volume ratio, volume fraction, and roughness calculated from 3-dimensional images reconstructed from stacks of CRM images from the different fibers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1100-1101
• /
• 2008

After lamination process, Isc is increased by sheet reflection. This paper presents the electrical output characteristics by back sheet reflection. The experiments was conducted by using single crystalline and multi crystalline PV module. The reflection area of single crystalline PV module is larger than multi one due to the difference of solar cell manufacturing. The experiments show that the increased performance ratio of single crystalline PV module output power is 1.55% rather than that of multi crystalline PV module output power is 1.13%. In addition, it is expected that the output power of single one rather than multi-one is increased by the lower temperature when the PV module is installed outside. The results can be reconsidered by the test material and test process. Back sheet used for humidity prevention makes PV module output power increasing.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권12호
• /
• pp.581-586
• /
• 2017

본 연구는 게임을 비롯한 많은 콘텐츠에서 활용하기 위한 GPU기반 사실적 물 애니메이션 기법을 제안한다. 물 표면은 반사 및 굴절과 같은 물리적 현상이 일어나며, 시점에 따른 반사와 굴절의 정도가 자동적으로 조절되어야 한다. 본 논문에서는 GPU 프레임 버퍼를 이용한 렌더투텍스처 방법(RenderToTexture)을 이용하여 반사 및 굴절결과를 텍스처로 저장하며, 이 저장된 데이터에 대한 텍스처 좌표 값을 변형함으로서, 자연스러운 물결의 모습을 표현한다. 또한 표면에 나타나는 굴절 및 반사의 정도가 프레넬(Fresnel) 공식을 통해 시점과 물 표면과의 각도에 따라 자동적으로 계산되도록 한다. 제안된 알고리즘은 윈도우 기반위에서 OpenGL API와 GLSL쉐이더 언어를 통해 구현되었다. 구현 결과, 물결의 자연스러운 움직임이 확인 되었으며, 30 프레임 이상의 속도로 렌더링 되었음이 확인 되었다.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1430-1435
• /
• 2007

We developed a 440MHz surface acoustic wave (SAW) microsensor integrated with pressure-temperature sensors and ID tag. Two piezoelectric substrates were bonded, in which ${\sim}150\;{\mu}m$ cavity was structured. Four sides were completely sealed by JSR photoresist (PR). Pressure sensor was placed on the top substrate, whereas ill tag and temperature sensor were placed on the bottom substrate. Using network analyzer, the developed microsensor was wirelessly tested. Sharp reflection peaks with high S/N ratio, small signal attenuation, and small spurious peaks were observed. All the reflection peaks were well matched with the coupling of mode (COM) simulation results. With a 10mW RF power from the network analyzer, a ${\sim}1$ meter readout distance was observed. Eight sharp ON reflection peaks were observed for ID tag. Temperature sensor was characterized from $20^{\circ}C$ to $200^{\circ}C$. A large phase shift per unit temperature change was observed. The evaluated sensitivity was ${\sim}10^{\circ}/^{\circ}C$.

• 대한임베디드공학회논문지
• /
• 제14권1호
• /
• pp.1-9
• /
• 2019

In this paper, we propose a method of generating a 2D gray image from LiDAR 3D reflection intensity. The proposed method uses the Fully Convolutional Network (FCN) to generate the gray image from 2D reflection intensity which is projected from LiDAR 3D intensity. Both encoder and decoder of FCN are configured with several convolution blocks in the symmetric fashion. Each convolution block consists of a convolution layer with $3{\times}3$ filter, batch normalization layer and activation function. The performance of the proposed method architecture is empirically evaluated by varying depths of convolution blocks. The well-known KITTI data set for various scenarios is used for training and performance evaluation. The simulation results show that the proposed method produces the improvements of 8.56 dB in peak signal-to-noise ratio and 0.33 in structural similarity index measure compared with conventional interpolation methods such as inverse distance weighted and nearest neighbor. The proposed method can be possibly used as an assistance tool in the night-time driving system for autonomous vehicles.

• 대한기계학회논문집A
• /
• 제40권8호
• /
• pp.731-736
• /
• 2016

본 연구에서는 의용생체공학에 널리 사용되는 미소바늘과 같은 3차원 고종횡비 미소구조물을 용이하게 제작할 수 있는 하이브리드 자외선 노광법에 대해 기술한다. 하이브리드 자외선 노광법은 기존에 사용되고 있는 경사노광, 회전노광 및 역노광을 혼합한 방법으로, 경사 및 회전노광은 경사진 축대칭 형상을 가지는 3차원 미소구조물의 제작이 가능하도록 하고 역노광은 자외선 노광공정 중 필연적으로 발생하는 하부기판에서의 자외선 반사를 최소화 시킨다. 자체 개발한 자외선 노광시스템과 SU-8 음성감광제를 이용하여 하이브리드 자외선 노광법의 다양한 공정조건이 최종 제작된 3차원 고종횡비 미소구조물 형상(종횡비, 선단의 곡률반경 등)에 미치는 효과를 확인한다. 또한 SU-8의 소프트 베이킹(soft baking) 조건과 미소구조물 선단 형상 사이의 관계에 대해서도 논의한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.77-80
• /
• 1998

Recently, extending the local broadcasting and increasing lots of informations. The low-loss communication cable is required in proportion as frequency .The reason of transportation loss causes to using the high frequencies like hundreds of MHz or decades of GHz. For the low transportation loss. It is required the developing-technology of foaming and the high foamed insulator with the dielectric ratio of the nearest to 1. Therefor, there is the purpose of developing the insulating materials for the low dielectric ratio. Also it is important to measure the attenuation, which is one of the important parameters.sa the evaluation of transportation characteristic with frequency in the communication cable. In this paper,the result showed that the dielectric ratio(1.4) of the nearest to 1 and low attenuation with high frequency were very related to the transportation and reflection characteristics such as propagation velocity (82.27%). Delay time and voltage standing wave ratio(VSWR).

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.239-246
• /
• 2017

A compact plasmonic switching scheme, based on the phase change of a thin-film chalcogenide material ($Ge_2Sb_2Te_5$), is proposed and numerically investigated at optical-communication wavelengths. Surface plasmon polariton modal analysis is conducted for various thicknesses of dielectric and phase-change material layers, and the optimized condition is induced by finding the region of interest that shows a high extinction ratio of surface plasmon polariton modes before and after the phase transition. Full electromagnetic simulations show that multiple reflections inside the active region may conditionally increase the overall efficiency of the on/off ratio at a specific length of the active region. However, it is shown that the optimized geometrical condition, which shows generally large on/off ratio for any length of active region, can be distinguished by observing the multiple-reflection characteristic inside the active region. The proposed scheme shows an on/off switching ratio greater than 30 dB for a length of a few micrometers, which can be potentially applied to integrated active plasmonic systems.

• 한국진공학회지
• /
• 제19권1호
• /
• pp.28-35
• /
• 2010

플라즈마 디스플레이 패널에서 명실콘트라스트(bright room contrast ratio: BRCR)를 개선하는 방향으로 새로운 전극구조를 설계하였다. 새로운 개념의 전극을 이용하여 블랙매트릭스 패턴의 영역을 넓힐 수 있었으며 이를 통하여 패널면의 반사휘도를 낮출 수 있었다. 제작한 플라즈마 디스플레이 패널에 대하여 방전전압, 방전효율, 휘도 등을 평가하였으며 명실콘트라스트가 크게 개선됨을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.185-190
• /
• 2006

An ultrasonic self-calibrating technique for the characterization of a ceramic which was fabricated by change pressing time during the HIP process has been applied by using the ratio of the reflection and transmission coefficients of normal incidence longitudinal waves. The ratio is self-compensated, in that it is independent of the characteristics for transmission and reception of ultrasound by the transducer and the condition of the couplant. The insensitive direction in parameter space is defined as the direction in which the variation of the ratio to changes of two parameters vanishes. For inverse problem the distribution of minima in an error surface is investigated.