• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.32-40
• /
• 1994

In this study by using EMAT(electro magnetic acoustic transducer)the artificial slit is installed on 12B-SUS pipe test piece. By making 4 cycle SH-burst (EMA) incidence to 45 .deg. angle, the signal data of pulse, received from EMAT are translated into digital-signal-processing- method SSP(Split Spectrum Processing) and Deconvolution method. The main conclusions obtained are as follows; (1) the signal data received from EMAT are translated with digital signal proc- essing of SSP-method and Deconvolution-method and this method shows exellent results more than Ultrasonic testing method does; (2) noise can well be removed by SSP with signal data, and resolution and S/N ratio are advanced; (3) when used with Ultrasonic wave general stainless steel has proporties of multiscattering and reflection phenomena, but resolution is progressed by using Deconvolution method;and (4) as addition-averaging-processing mumber is increasing, the resolution and S/N ratio are improved and the satisfactory signal is obtained.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.15-24
• /
• 2010

Photovoltaic solar cells are all in the incident because they are not converted into electrical energy, high-efficiency solar cells in order to reduce the loss of elements must be. Significant factor in the loss of solar cells, optical loss and electrical loss can be divided into. Optical losses occur when the sun will be joined on the surface of the reflection, the shadow loss due to electrodes, and the losses are in the solar wavelengths. Commercialization is currently the most common solar cells on the front of the light incident on the electrode is formed. Therefore, the shadow caused by the electrode to cover the dead area of the sun, due to factors that hinder the absorption of sunlight which is shadowing them and conversion efficiency of solar cells is the inhibition factor. These barriers to eliminate the electrode linewidth reduces the shadowing to reduce, but simply of the electrode line width is reduced electrode area by reducing the series resistance elevates this because to improve the electrode Aspect ratio(height/width) to increase Ag development of paste is required. In this study, aspect ratio of screen-printing method to increase the electrode Ag paste composition of the binder for the characterization of rheology in the shadow of the electrode by reducing the optical loss of the photoelectric conversion efficiency of solar cells to boost the performance measures was. Properties and printability of the paste, the binder resin sintered characteristics that affect the thermal properties are excellent with a good screen printability acrylic resin, ethyl cellulose, using a resin were evaluated. Prepared paste rheology properties, was formed to evaluate the electrode conductivity and aspect ratio.

• 한국터널지하공간학회 논문집
• /
• 제11권1호
• /
• pp.47-56
• /
• 2009

록볼트는 숏크리트와 함께 지하구조물의 주지보재로써 중요한 역할을 수행한다. 따라서 록볼트에 발생된 공동결함은 지하구조물의 안정성에 영향을 줄 수 있다. 최근 록볼트 건전도 평가를 위한 비파괴 검사 방법들 중 피에조 디스크 엘리먼트와 음향방출센서를 사용하는 유도초음파의 투과법과 반사법이 우수한 결과를 보여 주었다. 하지만 피에조 디스크 엘리먼트에서 발생되는 파는 현장에 적용하기에 부족한 에너지의 크기를 가진다. 또한 투과법의 경우 현장에서 록볼트 시공시 피에조 디스크 엘리먼트를 철근 끝단에 설치하여 시공하여야 한다. 본 연구의 목적은 충분한 에너지를 발생시킬 수 있는 유도초음파의 반사법을 개발하고 이를 현장에 시공된 록볼트의 건전도를 경가에 적용하는 것이다. 본 연구는 실내실험과 현장실험으로 수행되었다. 충분한 에너지를 갖는 유도초음파를 록볼트 두부에 자국정을 대고 해머로 타격하여 발생시켰으며, 이를 음향방출센서로 수신하였다. 측정된 신호의 분석을 위해 웨이브렛 변환을 이용하였다. 웨이브렛 변환의 최고점으로부터 에너지 속도를 산정하여 록볼트의 건전도를 평가하였다. 유도초음파의 에너지 속도는 실내에 설치된 록볼트 실험체와 현장에 시공된 록볼트의 결함비율이 증가함에 따라 증가하는 것으로 나타났다. 본 연구의 결과는 해머 타격방법이 현장에서 록볼트 건전도 평가에 유용한 방법이 될 수 있음을 보여 준다.

• 대한치과교정학회지
• /
• 제29권2호
• /
• pp.165-181
• /
• 1999

교정치료시 치아와 주위조직의 부작용을 최소로 하면서 최대의 치료결과를 얻기 위해서는 치료역학을 각 환자의 치아 및 주위 해부학적 환경에 맞도록 개인화 시켜야한다. 특히 성인 교정시 문제되기 쉬운 치근흡수 또는 치주질환으로 인한 치조골 손실로 인하여 치관/치근 비율이 변했을 때 치아의 저항중심위치의 변화와 관련된 생역학적 반응의 차이에 주의하여야 한다. 본 연구에서는 정상 치주조직뿐만 아니라 다양한 비정상적 치주 및 치아상태에서 치관/치근 비율이 변하였을 때 일정한 교정력하에서의 치아의 초기이동 양상을 연구하기 위하여, 성인의 인체 건조 두개골 및 하악골상에서 laser 반사측정법 및 lever and pulley force applicator와 photodetector를 이용하여, 상악 6전치군을 대상으로는 치조골높이를 각각의 치아에 대하여 2mm씩 총 8mm까지 감소시켰고, 하악 6전치군을 대상으로는 치근길이를 각각의 치아에 대하여 2mm씩 총6mm까지 감소시키면서, 이렇게 다양하게 정량화된 변수들 하에서 상하악6전치군의 저항중심의 위치변화를 연구한 결과 다음과 같은 결론을 얻었다. 1. 초기상태에서 상악 6전치군의 초기이동시의 저항중심점의 위치는 6전치 전체 평균치아 치근의 치경부(CEJ)로부터 치근첨 방향으로 약 $42.4\%$되는 위치에 있었으며, 각 치아의 치조골의 높이가 감소할수록 저항중심점은 치근첨방향으로 약 $76.7\%$되는 부위까지 이동하였다. 2. 상악 6전치군에서 저항중심점의 6전치 전체 평균 치조정으로부터의 거리는 치조골의 감소와 함께 지속적으로 감소하였으나, 치조골내의 평균 치근의 길이에 대한 비율은 치조골의 감소에 상관없이 약 $33\%$내외에서 비교적 일정하였다. 3. 초기상태에서 하악 6전치군의 초기이동시의 저항중심점의 위치는 6전치 전체 평균치아 치근의 CEJ로부터 치근첨방향으로 약 $43\%$되는 위치에 있었으며, 각 치아의 치근의 길이가 감소할수록 이 비율은 약 $54\%$까지 증가하였다. 그러나 CEJ로부터 저항중심점까지의 거리는 5.3mm전후로부터 3.3mm내외까지 감소하여 치근의 길이가 감소할수록 저항중심점이 CEJ방향으로 이동하였다. 4.치조골 또는 치근흡수시, 각각의 단위 흡수량에 따른 저항중심위치의 변화에 미치는 영향은 초기에는 치조골이 감소 될 때가 더 컸으나 전체 평균 치근길이의 중간부위에서의 영향은 비슷했다.

• KIEAE Journal
• /
• 제14권6호
• /
• pp.5-13
• /
• 2014

Various studies on lighting energy savings are conducted, given that lighting energy consumption accounts 23.5% of building energy consumption. Especially, external type light shelf's efficiency is acknowledged; however, its application is limited in Korea, where high rise building ratio is high, due to high wind pressure. This study delves into natural lighting system to cope with wind pressure, and proposes the punching plate-installed light shelf. This study actually draws lighting energy output, according to whether the punching plate is applied through the test-bed, and verifies the effectiveness of the punching plate-installed light shelf. The conclusion is presented below: First) The result of performance evaluation of light shelf with the punching plate in winter solstice showed that the awning area decreased as the opening ratio increased so that the indoor distributed illumination tended to increase, and $-40^{\circ}$ which was advantageous for awning was determined as the proper angle. Second) The light shelf with the punching plate in spring/autumn equinox shows improved lighting according to the angle, and the appropriate angle of light shelf with the punching plate has increased to $15^{\circ}$ and $20^{\circ}$ according to the opening ratio in comparison to $5^{\circ}C$ which is the appropriate angle of light shelf with no punching plate due to the reflection area reduced by the reflecting plate with holes. Third) The result of performance evaluation of light shelf with the punching plate in summer solstice showed that the lighting performance tended to decrease as the opening ratio increased. 4) The light shelf with the punching plate incurs a 50% energy loss in comparison to the light shelf with no punching plate. However, its effectiveness has been proven in the aspects that it can bring a 50% energy saving in comparison to the case with no installation of light shelf and that it can be designed in response to wind pressure on the high floors.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.643-646
• /
• 2005

The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.

• 한국과학교육학회지
• /
• 제36권2호
• /
• pp.347-360
• /
• 2016

이 연구는 학생 평가활동을 적용한 논의기반 탐구 과학수업이 고등학생들의 반성적 사고에 어떠한 영향을 미치는지 알아보고자 하였다. 이를 위해 광역시의 인문계 고등학교 1학년 6개 학급의 학생 166명을 대상으로 한 학기에 걸쳐 5개의 논의기반 탐구 과학수업을 실시하였다. 실험집단(84명)은 논의기반 탐구 과학수업의 주장과 증거 단계에 동료평가활동과 자기평가활동을 적용하여 논의의 질을 평가하는 경험을 제공하였으며 비교집단(82명)은 이 단계를 생략하였다. 학생 평가활동이 학생들의 반성적 사고에 미치는 효과를 알아보기 위해 학생들이 작성한 반성 글쓰기를 분석하였으며, 인터뷰와 설문조사를 통해 평가활동에 대한 학생들의 인식을 탐색하여 학생 평가활동의 타당성과 활용 정도를 알아보았다. 반성 글쓰기 분석 결과, 1차 반성 글쓰기에서 두 집단 간의 유의미한 차이가 없었으나 3차와 5차 반성 글쓰기에서 실험집단의 점수가 비교집단보다 유의미하게 높았다. 반성 글쓰기의 하위 요소에서 탐구과정 분석, 학습의 이해, 생각의 변화 요소는 실험집단과 비교집단 모두 메타인지 수준의 반성을 나타내는 학생 비율이 증가하였으나, 실험집단이 비교집단보다 메타인지 수준의 반성을 보이는 학생 비율이 더 높았다. 반성적 실천 요소의 분석 결과, 실험집단은 메타인지 수준의 반성적 실천 학생 비율이 증가하였으나 비교집단은 오히려 감소하였다. 학생 설문조사와 인터뷰를 분석한 결과, 학생들은 평가활동이 자신의 학습에 도움이 된다고 인식하고 있었다. 또한 평가활동을 통해 자신이 무엇을 얼마나 알고 있는지를 깨닫게 되고 문제점을 파악하여 개선할 수 있는 방법을 탐색하는 메타인지 능력이 향상되었다고 응답하였다. 이러한 메타인지적 반성을 통해 부족한 부분을 개선하려 노력하였으므로 평가활동이 반성적 실천을 이끌었다고 인식하였다. 따라서 학생 평가활동은 학습의 과정으로 통합되어 학생들을 능동적으로 학습에 참여시킬 뿐만 아니라 학습에 대한 책임감을 향상시켜 학습을 스캐폴딩하는 도구로써 활용이 가능하다고 생각된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.454-454
• /
• 2014

Silicon microwire array is one of the promising platforms as a means for developing highly efficient solar cells thanks to the enhanced light trapping efficiency. Among the various fabrication methods of microstructures, deep reactive ion etching (DRIE) process has been extensively used in fabrication of high aspect ratio microwire arrays. In this presentation, we show precisely controlled Si microwire arrays by tuning the DRIE process conditions. A periodic microdisk arrays were patterned on 4-inch Si wafer (p-type, $1{\sim}10{\Omega}cm$) using photolithography. After developing the pattern, 150-nm-thick Al was deposited and lifted-off to leave Al microdisk arrays on the starting Si wafer. Periodic Al microdisk arrays (diameter of $2{\mu}m$ and periodic distance of $2{\mu}m$) were used as an etch mask. A DRIE process (Tegal 200) is used for anisotropic deep silicon etching at room temperature. During the process, $SF_6$ and $C_4F_8$ gases were used for the etching and surface passivation, respectively. The length and shape of microwire arrays were controlled by etching time and $SF_6/C_4F_8$ ratio. By adjusting $SF_6/C_4F_8$ gas ratio, the shape of Si microwire can be controlled, resulting in the formation of tapered or vertical microwires. After DRIE process, the residual polymer and etching damage on the surface of the microwires were removed using piranha solution ($H_2SO_4:H_2O_2=4:1$) followed by thermal oxidation ($900^{\circ}C$, 40 min). The oxide layer formed through the thermal oxidation was etched by diluted hydrofluoric acid (1 wt% HF). The surface morphology of a Si microwire arrays was characterized by field-emission scanning electron microscopy (FE-SEM, Hitachi S-4800). Optical reflection measurements were performed over 300~1100 nm wavelengths using a UV-Vis/NIR spectrophotometer (Cary 5000, Agilent) in which a 60 mm integrating sphere (Labsphere) is equipped to account for total light (diffuse and specular) reflected from the samples. The total reflection by the microwire arrays sample was reduced from 20 % to 10 % of the incident light over the visible region when the length of the microwire was increased from $10{\mu}m$ to $30{\mu}m$.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.324-331
• /
• 2016

The present study focuses on the characteristics of a supersonic jet flowing from a rectangular nozzle exit on a flat plate. Flow visualization techniques using schlieren and kerosene-lampblack tracing are utilized to investigate shock reflection structures and boundary-layer separations over a flat plate. Wall pressure measurements are also carried out to quantitatively analyze the flow structures. All observations are repeated for multiple jet flow boundary conditions by varying the flap length and nozzle pressure ratio. The experimental results show that the jet flow structures over the flat plate are highly three-dimensional with strong bleeding flows from the plate sides, and that they are sensitive to plate length and nozzle pressure ratio. A multi-component force measurement device is also utilized to observe the characteristics of the jet flow thrust vectoring over the plate. The maximum thrust deflection angle of the jet is about $8^{\circ}$, demonstrating the applicability of thrust vector control via a flat plate installed at the nozzle exit.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.519-528
• /
• 2016

In order to achieve fast computational speed with good visual quality of output video, we propose a frequency domain based new fractal video compression scheme. Normalized cross correlation is used to find the structural self similar domain block for the input range block. To increase the searching speed, cross correlation is implemented in the frequency domain using FFT with one computational operation for all the domain blocks instead of individual block wise calculations. The encoding time is further minimized by applying rotation and reflection DFT properties to the IFFT of zero padded range blocks. The energy of overlap small size domain blocks is pre-computed for the entire reference frame and retaining the energies of the overlapped search window portion of previous adjacent block. Quadtree decompositions are obtained by using domain block motion compensated prediction error as a threshold to control the further partitions of the block. It provides a better level of adaption to the scene contents than fixed block size approach. The result shows that, on average, the proposed method can raise the encoding speed by 48.8 % and 90 % higher than NHEXS and CPM/NCIM algorithms respectively. The compression ratio and PSNR of the proposed method is increased by 15.41 and 0.89 dB higher than that of NHEXS on average. For low bit rate videos, the proposed algorithm achieve the high compression ratio above 120 with more than 31 dB PSNR.