• 한국음향학회지
• /
• 제34권6호
• /
• pp.493-498
• /
• 2015

물로 채워진 음향 펄스 튜브 내에는 가진 조건들에 따라 복잡한 형태의 음향 신호들이 형성될 수 있다. 이는 펄스 튜브를 이용해 저주파수 대역에서 평면파 반사계수를 측정하는 것을 어렵게 한다. 본 연구에서는 COMSOL Multiphysics를 이용하여 튜브 벽이 가진되는 경우 펄스 튜브 내에 평면파 뿐 아니라 비평면파 모우드의 복잡한 음장이 발생됨을 보였다. 모우드 분리 방법인 이차원 푸리에 필터링으로 입사 또는 반사하는 평면파 모우드만을 각각 분리할 수 있었다. 이에 시간 게이팅을 적용하므로 음향 시편의 평면파 반사계수를 보다 정확하게 결정할 수 있게 하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1987년도 학술발표회 논문집
• /
• pp.48-51
• /
• 1987

In this paper, acoustic reflection microscope system has been built for the purpose of detecting subsurface defects in materials and demonstrated for nondestructive testing application. 100 won coin, aluminuim, ceramics, and IC component employed as experimental samples and acoustic reflection microscope was operated in the focused and defocused mode at a frequency of operation of 3 MHz. It has been found that acoustic reflection icroscope has the resolution of 500 ${\mu}{\textrm}{m}$ and it has been an excellent tool for nondestructive testing.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1346-1354
• /
• 2002

The purpose of this work is to study the effects of specularly reflecting wall under the combined radiative and laminar free convective heat transfer in an infinite square duct. An absorbing and emitting gray medium is enclosed by the opaque and diffusely emitting walls. The walls may reflect diffusely or specularly. Boussinesq approximation is used for the buoyancy term. The radiative heat transfer is evaluated using the direct discrete ordinates method. The parameters under considerations are Rayleigh number, conduction to radiation parameter, optical thickness, wall emissivity and reflection mode. The differences caused by the reflection mode on the stream line, and temperature distribution and wall heat fluxes are studied. Some differences are observed for the categories mentioned above if the order of the conduction to radiation parameter is less than order of 10$\^$-3/ fer the range of Rayleigh number studied. The differences at the side wall heat flux distributions are observed as long as the medium is optically thin. As the top wall emissivity decreases, the differences between these two modes are increased. As the optical thickness decreases at the fixed wall emissivity, the differences also increase. The difference of the streamlines or the temperature contours is not as distinct as the side wall heat flux distributions. The specular reflection may alter the fluid motion.

• 문화기술의 융합
• /
• 제7권3호
• /
• pp.463-468
• /
• 2021

본 연구에서는 1.55um의 파장을 갖는 DFB 레이저에서 굴절률 격자와 이득 격자가 동시에 존재할 때, 오른쪽 거울 면에 반사가 일어나지 않도록 유전막 코팅을 하여 𝜌_r=0 이 되도록 하였다. 𝛿L>0인 경우일 때, 발진 모드에 대하여, 발진 주파수와 발진 이득의 특성을 해석했다. 좌측 거울면의 격자 위상이 𝜋에서부터 𝜋/2 계속 감소할 때, 각 모드의 그래프 선들이 좌측으로 조금씩 이동한다. 발진 모드의 문턱 이득이 가장 낮은 경우는 𝜅L=10인 경우이고, 이때 모드 선별성은 상대적으로 낮다. 모드 선별성이 우수한 경우는 𝜅L=0.5에서부터 𝜅L=6 정도까지이고, 이 경우 주파수 안정성이 우수하다. 두 개의 벽개면을 갖는 경우와 비교하면, 한 개의 무반사면을 갖는 경우, 발진 모드의 문턱 이득이 증가하지만 모드 선별성은 2배 정도 더 우수해 진다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 하계학술발표회
• /
• pp.190-191
• /
• 2004

• 전자공학회논문지A
• /
• 제31A권2호
• /
• pp.60-66
• /
• 1994

The scattering problem by E-polarized plane wave with oblique incidence on a tapered resistive strip grating with infinite resistivity at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density is expanded in a series of Ultraspherical polynomials of the zeroth order. The expansion coefficients are calculated numerically in the spectral domain, the numerical results of the geometricoptical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing. It is found out that these sharp variation points are due to the transition of higher modes between the propagation mode and the evanescent mode.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.183-188
• /
• 2003

This study is to make the fundamentals of sound quality evaluation in regard of acoustical characteristics of passenger compartment. The deviation of frequency response function level within audible frequency is evaluated at receiving point in the research of room acoustics. In this study, frequency response function is the one between speaker and driver's ear positions. The positions of driver and audio speakers are optimized by analysis of acoustic mode of acoustic cavity. The main reflection planes are determined by analysis sound ray path diffused at optimized speaker positions. Finally, designer selects acoustical material by analysis of absorption effect of acoustical materials on the main reflection planes in order to avoid to distortion and fluctuation of frequency response function..

• 한국통신학회논문지
• /
• 제19권2호
• /
• pp.331-337
• /
• 1994

저항띠의 양끝에서 0( /square)으로 변하는 저항율을 가진 저항띠의 적자구조에 비스듬히 입사하는 E분극 평면파에 의한 전자파 산람눙제를 과수영역에서 모멘트 법을 이용하여 해석하였따. 이때 저항띠에 유도되는 전류일도는 2종 Chebyshev 다항식의 급수로 전개하였다 전개계수들은 과수영역에서 수치계산하였고, 본 논문에서의 변하는 저항율을 갖는 경우와 기존의 균일 저항율을 갖는 경우에 대해 기하광학적 반사계수의 수치계산 결과를 비교하였다. 그리고 기하광학적 반사계수의 크기에서 급변점들이 위치는 입사각과 스트립 주기를 변화시킴으로써 이동시킬 수 있었다. 이러한 급변점들은 전파모드와 감쇠모드 사이서 고차모드가 천이될 때 발생함을 알 수 있었다.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.416-420
• /
• 2008

This paper proposes a new method to improve signal characteristics at branches frequently met in system-level routing. We also introduce the numerical formula which can estimate the time delay due to branches and the simple design guideline for system-level routing. Finally, we propose the routing method which can eliminate the signal reflection for the case of one driver and two receivers (multi-drop topology).

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.48-58
• /
• 2010

In this study, position tracking and force reflection control of a master-slave manipulator which will be used for handling objects contaminated by radioactivity has been addressed. Since available measurements concerning on dynamic motion of the master-slave manipulator are restricted, a simple constrained control structure was suggested. In the consideration of the uncertain dynamic behaviors of the slave manipulator which is dependent upon mass and shape of work pieces grasped and dynamic properties of the environment contacted, a simple structured sliding mode control was suggested to guarantee robustness with respect to parameter uncertainties and external disturbances. The proposed control was applied to a 1-DOF master-slave link system. The control performances were verified along with some computer simulation results.