• 한국해양공학회지
• /
• 제35권2호
• /
• pp.113-120
• /
• 2021

In order to perform a precise wave tank experiment, it is necessary to maintain the incident wave generated by the wavemaker in a steady state and to effectively remove the reflected waves. In this paper, a combined sloping-wall-type punching plate wave absorber was proposed to attenuate reflected waves effectively in a two-dimensional mini wave tank. Using the four-point reflection separation method, the reflected waves were measured to determine the reflection coefficients. Experiments were conducted under various punching plate porosities, sloping plate angles, and incident wave conditions to evaluate the performance of the combined punching plate wave absorber. The most effective wave absorbing performance was achieved when the porosity was 10% and the inclination angle of the punching plate was 18.6° under the present condition. It was also found that the installation of the sloping plate could improve the wave attenuation performance by generating the shoaling effect of the incident wave.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.718-725
• /
• 2003

The present study addresses the distortion of the compression wave reflected from an open end of a shock tube. An experiment is carried out using the simple shock tube with an open end Computational work is also performed to represent the experimented flows. The second-order Total Variation Diminishing scheme is employed to numerically solve the unsteady, axisy-mmetric, inviscid, compressible governing equations. Both the experimented and predicted results are in good agreement. The generation and development mechanisms of the compression wave, which Is reflected from the open end of the shock tube, are obtained in detail from the present computations. The effect of size of the baffle plate at the open-end that causes the reflection of the incident expansion wave is found negligible. A good correlation is obtained for transition of the reflected compression wave to a shock wave inside the tube. The present data show that for a given wave length of the incident expansion wave the transition of the reflected compression wave to a shock wave can be predicted with good accuracy.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.91-96
• /
• 2008

A reflected breakwater can be affected by wave pressure and power because it is to be concentrated by wave energy. The present study is to estimate hydraulic behavior affecting around a reflected breakwater, which is discontinuity cases and various angle of coner at the breakwater. The numerical model to investigate wave diffraction, which is important hydraulic factor in the ocean, is performed by using direct boundary element method. The present numerical results are compared with the solutions of approximate and absolute based on an eigenfunction, and the solution of analytical by Fresnel integral. The results of the present numerical simulation agreed well with those of the published numerical and analytical data. As a result of this study, wave height is high at the comer of breakwater, and it is to be high if angle of conner at the reflected breakwater is small.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.23-28
• /
• 2011

In this paper, a new generation method for ship induced waves is proposed using the fully non-linear 3-D numerical model with non-reflected wave generation system (LES-WASS-3D). A ship induced wave generated by the newly proposed method is examined in comparison with that obtained by an empirical formula. It is then shown that there is a good agreement in free surface the elevation between them. As a result, it is revealed that a ship induced wave in a 3-D numerical wave field can be simulated well using LES-WASS-3D.

• 지구물리와물리탐사
• /
• 제7권4호
• /
• pp.225-233
• /
• 2004

이 연구에서는 초음파 주사검층(borehole acoustic scanner)으로 얻어진 반사파의 에너지 및 도달시간 자료를 이용하여 연속적인 암반의 강도를 평가함으로써 지반의 안정성 조사나 대형 구조물의 설계 및 시공 대책을 위한 지반 정보를 제공하고자 한다. 배합비가 다른 모르타르와 콘크리트 시료와 여러 암종의 암석에 대한 실내 물성 시험을 통해 탄성파 속도, 밀도 및 일축압축강도를 측정하고, 동일한 시료에 대하여 초음파 주사검층을 실시하여 반사파의 에너지 및 도달시간 자료를 획득한 후, 실내 물성 시험 결과와 초음파 주사검층 결과를 비교 분석함으로써 초음파 주사검층의 반사파 에너지를 이용한 암반강도 평가의 정량화 가능성을 확인하였다.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1218-1226
• /
• 1994

The shock tube is a useful device for investigating shock phenomena, spray combustion, unsteady gas dynamics, etc. Therefore, it is necessary to analyze exactly the flow phenomena in shock tube. In this study, the mechanics of its reflected shock zone has been investigated by using of the one-dimensional gas dynamic theory in order to estimate the transition from initial reflection of shock wave region. Calulation for four kinds of reflected shock tube temperature (i.e. (a) 1388 K (b) 1276 K (c) 1168 K (d) 1073 K) corresponding to the experimental conditions have been carried out sumarized as follows. (1) The qualitative tendency is almost the same as in that conditions in region of reflected wave region. (2) High temperature period (reflected shock wave temperature) $T_{5}$, exists 0-2.65 ms. (3) Transition period from temperature of reflection shock wave is far longer than the calculated one. This principally attributed to the fact that the contact surface is accelerated, also, due to the release of energy by viscoity effect. This apparatus can advance the ignition process of a spray in a ideal condition that involved neither atomization nor turbulent mixing process, where, using a shock tube, a column of droplets freely from atomizer was ignited behind a reflected shock.

• 전자공학회논문지D
• /
• 제36D권4호
• /
• pp.18-24
• /
• 1999

본 논문에서는 완전도체구의 전파흡수제를 설계하는 방법을 제시하였다. 코팅된 구의 역산란파는 반사파와 creeping wave의 합으로 표현된다. 현재는 곡률을 가진 산란체의 경우일지라도 단순히 반사파의 반사계수를 0이 되게 하는 저파흡수제를 설계하였다. 크기가 작은 완전도체구의 전파흡수체를 설계하기 위해서는 반사파 뿐만 아니라 회절파인 creeping wave에 의한 영향도 함께 고려해 주어야 한다. 이를 위해 코팅된 구의 고유함수해의 역산란파가 0이 되는 조건을 Newton-Raphson 수치 해석 방법을 이용하여 전파흡수체를 설계하였다. 본 연구에서 제안한 방법으로 전파흡수체를 설계하여 크기가 작은 완전도체구에 코팅하였을 경우 기존의 무한 평면으로 가정하여 구한 전파흡수체 보다 우수한 흡수 성능을 보였다.

• 대한토목학회논문집
• /
• 제31권3B호
• /
• pp.305-308
• /
• 2011

본 연구에서는 무반사 조파시스템을 적용한 3차원 수치파동수조에서 다양한 다방향불규칙파의 조파 방법에 의한 다방향불규칙파의 방향분포함수에 대해서 검토하였다. 그 결과 무반사 조파가 가능한 3차원 수치파동수조(LES-WASS-3D)에서 다방향불규칙파의 조파가 가능한 것을 확인하였다.

• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.401-406
• /
• 2011

본 연구에서는 3차원 수치파동수조에서 무반사 조파시스템을 이용한 경사입사파의 조파방법을 새롭게 제안하고, 계산된 수면변위 및 수평유속에 대한 수치결과와 Stokes파의 3차 근사이론값과의 비교 분석을 통하여 새로운 모델의 검증을 실시하였다. 그 결과 본 연구에서 제안한 경사입사파의 조파방법의 타당성과 유효성을 확인할 수 있었다.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1512-1518
• /
• 2018

The problem of scalar wave scattering by a sphere on or near a planar substrate is analytically solved. The solution is a set of wave functions coming in the form of infinite series of spherical and plane waves. In air, the incident plane wave is either scattered by the sphere or reflected from the substrate. A part of these scattered or reflected waves propagate to the other object where it is reflected and scattered again. Such processes of scattering and reflection repeat in turn indefinitely to generate multiply scattered waves, which are represented in the corresponding terms in the infinite series. The term in the series can be arranged in a recognizable manner to explicitly reveal the involved process and the multiplicity of scattering.