• 한국지반공학회논문집
• /
• 제31권5호
• /
• pp.67-74
• /
• 2015

지하수위 하강에 따른 침하량은 1차 압밀 침하량에 비해 비교적 작기 때문에 잔류침하량 산정시 별도로 고려하지 않는다. 그러나 고속철도 콘크리트 궤도에서의 허용잔류침하량은 30mm로 작기 때문에 예기치 못한 과도한 지하수위 하강으로 인하여 허용잔류침하량을 초과할 수 있다. 본 연구에서는 응력-간극수압 유한요소 해석을 통하여 지하수위 변동에 따른 침하 영향을 분석하여 해석결과와 실측자료를 비교하였다. 그 결과 허용잔류침하량을 만족하기 위한 탄성계수 범위를 제시 하였으며 설계 시 지하수위 저하 영향이 반영되는 것이 타당하다고 판단된다.

• 환경정책연구
• /
• 제3권2호
• /
• pp.1-29
• /
• 2004

As a result of very limited access due to the military confrontation between South and North Koreas for the last five decades, ecosystems in the transboundary coastal area in the western part of Korean Peninsula have been protected from intensive developments in both Koreas. In the core of the recent two military collisions lies the fishery resources represented as blue crabs as well as the politico-military aspect. Increasing development pressures from both sides as reflected in the South Korea supporting the construction of an industrial complex in Kaesung, North Korea, is the main factor which threatens the sustainable resource base in this region. This research is aimed to develop a cooperative management system for the well-preserved transboundary coastal area between South Korea and North Korea. The Pressure-State-Response (PSR) framework of OECD was used to assess environmental conditions, socioeconomic pressures on the environment of the region, and policy responses of both Koreas to those pressures. Protection of ecosystems, peace settlement, and prosperity of the region and the entire peninsula were proposed as the management goals of the cooperative management system. The designation of the area as a Co-managed Marine Protected Area System (COMPAS) through close cooperation among South Korea, North Korea, and international entities was suggested as a way to achieve those goals. Revision of legal and institutional mechanisms, strengthening knowledge base for optimal COMPAS management, integration of the marine protected area and DMZ (demilitarized zone) ecosystem, enhancing stakeholder participation, building international partnership, and securing financial resources were presented as six management strategies.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.60-67
• /
• 2010

Recently, there has been an increase in the construction of various types of coastal structures for efficient wave dissipation, seawater exchange, and so on. Among these, a perforated slit caisson has been widely used to reduce the reflected wave energy and the wave pressure on the structure. Therefore, many studies on the wave force on a caisson, as well as the wave reflection from it, have been carried out with laboratory experiments and numerical analyses, considering it as a 2-D problem. However, because a structure like a perforated slit caisson has a variable 3-D shape, waves forces should be considered as a 3-D problem. Therefore, in this paper, a fully-nonlinear 3-D numerical model (LES-WASS-3D) is proposed to examine the reflection characteristics of a perforated slit caisson with two chambers. The numerical model, LES-WASS-3D, was verified in a 3-D wave field by a comparison with existing experimental data for wave reflection coefficients. Then, using the numerical results, the reflection from a perforated slit caisson with two chambers was examined in relation to wave steepness, chamber width, and the shape/porosity of perforated slit.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1033-1042
• /
• 1994

2차원 경계요소-유한요소 연계법을 사용하여 구형 수조구조물의 동적거동 특성을 파악하였다. 비점성, 비압축성 이상유체의 운동은 경계요소법으로 모델링하였으며 구조물의 운동은 유한요소법으로 모델링하였다. 경계요소법의 적용시 Singularity를 소거한 경계적분식을 사용하였다. 유체와 구조물의 경계면에서 적합조건과 평형조건을 만족시킴으로써 경계요소와 유한요소를 연계하였다. 유체-구조물 상호작용의 영향은 유체의 부가질량행렬과 유체 유동에 의한 강성행렬로 연계된 유체-구조물계에 반영된다. 연계된 유체-구조물계의 고유치 문제로부터 수조구조물의 고유진동수외 고유모드를 구하였으며 수평 및 수직 자바운동에 의하여 수조구조물에 발생하는 유체동압력과 자유수면의 유동도 산출하였다.

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.1-6
• /
• 2011

본 연구에서는 정상초음파장의 간섭에 의해 야기되는 예혼합화염의 구조 변이를 규명하기 위한 실험 결과를 제시한다. 화염전파를 관찰하기 위해 슐리렌 기법을 이용하였으며, 초기압력 및 연소챔버 개방 유무에 따른 화염선단의 형태 및 화염 전파속도를 고찰하였다. 정상초음파장에 의한 화염선단의 찌그러짐이 관찰되었고, 초음파장의 특성이 변하지 않는 한 그 수직방향으로의 위치는 일정하였다. 정상초음파의 영향을 받은 화염은 전파할수록 구조적 변화가 심해졌으며, 전파속도 또한 증가하였다. 반사파와 정상초음파의 영향으로 연꽃모양의 화염(lotus flame)이 형성되는 사실을 발견할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제15권3호
• /
• pp.235-243
• /
• 2004

A number of potential applications of aluminum foams are being identified and renewed interest in these engineering materials is also reflected by several current research projects. One of the key issues for industrial exploitation of aluminum foams is the development of cost-effective manufacturing strategies facilitating, preferably, net shape production of foams with controlled porosity and cell size, and minimized structural imperfection. Especially, melt route to aluminum foam production based on the foaming agents offer attraction of low cost and the potential for good microstructure. The present paper is focused mainly on foaming agents of melt-foam aluminum such as $TiH_2$ or $TiH_2-Al$ mixture. For the purpose of economical manufacturing, we are proposed to hydrogen induced mechanical alloying (HIMA) process. Thermo-physical properties of particles synthesized are compared with conventional methods. Specimens synthesized are characterized by scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), thermo- gravimetry-differential scanning calorymetry (TG-DSC), pressure-composition-isotherm. (PCI).

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.553-559
• /
• 2006

Most diesel injector, which is currently used in high-pressure common rail fuel injection system of diesel engine, is driven by the solenoid coil energy for its needle movement. The main disadvantage of this solenoid-driven injector is a high power consumption, high power loss through solenoid coil and relatively fixed needle response's problem. In this study, a prototype piezo-driven injector, as a new injector mechanism driven by piezoelectric energy based on the concept of inverse piezo-electric effect, has been designed and fabricated to know the effect of piezo-driven injection processes on the diesel spray structure and internal nozzle flow. Firstly we investigated the spray characteristics in a constant volume chamber pressurized by nitrogen gas using the back diffusion light illumination method for high-speed temporal photography and also analyzed the inside nozzle flow by a fully transient simulation with cavitation model using VOF(volume of fraction) method. The numerical calculation has been performed to simulate the cavitating flow of 3-dimensional real size single hole nozzle along the injection duration. Results were compared between a conventional solenoid-driven injector and piezo-driven injector, both equipped with the same micro-sac multi-hole injection nozzle. The experimental results show that the piezo-driven injector has short injection delay and a faster spray development and produces higher injection velocity than the solenoid-driven injector. And the predicted simulation results with the degree of cavitation's generation inside nozzle for faster needle response In a piezo-driven injector were reflected to spray development in agreement with the experimental spray images.

• 한국안광학회지
• /
• 제12권4호
• /
• pp.19-22
• /
• 2007

산악 인구 증가와 더불어 해외원정 등반 인구도 크게 늘고 있다. 6천 미터 이상의 고소등반 시 발생하는 조난사고의 많은 부분이 설맹 때문이다. 설맹의 직접적 원인은 자외선에 의한 각막 및 망막의 손상이다. 고소에서의 자외선의 강도는 기압강하에 따른 고도효과와 설면에서 반사효과의 상승작용에 의해 크게 높아진다. 해발 4천 미터 설산에서의 자외선 강도는 지상에서보다 약 3배, 8천 미터에서는 약 4배 증가하는 것으로 나타났다. 고소등반에서 설맹을 방지하기 위해서는 고글보다 선글라스 형태가 바람직하다. 또 고소등반용 선글라스는 기계적 강도가 높은 프레임, 자외선을 100% 차단하는 플라스틱 렌즈의 사용이 요구된다. 얼굴과 선글라스 틈 사이로 들어오는 자외선을 차단하기 위해 탈부착식 차단막이 필요하다. 또 선글라스가 쉽게 탈착되지 않기 위하여 템플은 귀를 감을 수 있도록 길고 유연성이 좋아야 한다. 안구 주위의 동상을 방지하기 위해 메탈프레임을 합성수지로 피복하는 것이 바람직하다.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.62-68
• /
• 2016

A simple calculation tool for added resistance in waves is developed to utilize for initial design or embedded module for navigation support system. In order to select an appropriate calculation method for added resistance in waves, three methods (drift method, integrated pressure method, radiated energy method) based on strip method are applied to Wigley I and KVLCC2. The methods for added resistance in waves give the underestimated results because it is difficult to consider nonlinear effects due to reflected wave. We apply asymptotic (Faltinsen's method) and empirical formula (NMRI's method) to improve the accuracy for short wave length region. In comparison with experimental results, the combination of radiated energy method and short wave correction method of NMRI is the most reasonable. However, a simple sum of results calculated by two methods gives rise to the overestimation of added resistance for short wave length region because added resistance of radiated energy method exits in total reflection region. To overcome this problem, modified radiated energy method is proposed using correction coefficient defined by reflection coefficient of NMRI's method. Finally, added resistance in regular waves is composed of added resistance of modified radiated energy method and that of short wave correction method of NMRI. Estimated added resistance in regular waves is validated by comparison with experimental results of other research groups.

• 대한물리의학회지
• /
• 제12권2호
• /
• pp.9-20
• /
• 2017

PURPOSE: The purpose of this study is to understand the difference in the risk factors of coronary artery disease (CAD) between Korean and American CAD patients to determine the discriminant factor for each group, as well as to provide useful information to be reflected in the national concern of health. METHODS: Data were collected from 248 Korean and 107 American CAD patients who underwent either percutaneous coronary intervention or coronary artery bypass grafting. By using t-test and $X^2$-test, risk factors were compared between the Koreans and Americans. To elucidate which risk factor was the most discriminant for each group, logistic regression analysis was performed. RESULTS: All risk factors, except diastolic blood pressure, showed a significant difference between the two groups. $X^2$-test showed statistical significance with respect to the smoking rate between the female groups. Moreover, there was a statistically significant difference between the two groups regarding blood total cholesterol (TC) and triglyceride, and between the male groups, here was a statistically significant difference with respect to blood high-density lipoprotein cholesterol (HDL). Diabetes mellitus (DM) was the most discriminant factor for Korean patients while TC/HDL is the most discriminant for the Americans. CONCLUSION: The characteristics of CAD risk factors were determined to be different between Koreans and Americans in this study. TC/HDL was a discriminant factor for Americans while DM was a discriminant factor for Koreans. This result implies that DM should primarily be given attention to prevent CAD in Korean adults.