• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.153-160
• /
• 2018

Purpose : We retrospectively analyzed doses of each radiation therapy technique used in the treatment for left breast cancer patients after partial mastectomy through dose results for normalorgans and tumor volume to use this as a clinical reference for radiation therapy of domestic left breast cancer patients. Materials and Methods : 40 patients who underwent partial mastectomy on left breast cancer were classified in 3 treatment methods. The treatment plan was evaluated by HI(homogeneity index), $D_{95%}$, and CI(conformity index), and the $V_{hot}$ for gross tumor volume and clinical target volume of each treatment method. In Cyberknife treatment, tumor volume was the same as high dose volume in the other techniques, so no consideration was given to clinical target volume. Treatment plan evaluation for normal organs were evaluated by mean dose on ipsilateral lung, heart, left anterior descending artery, opposite breast and lung, and non-target tissue. Result : Treatment with volumetric arc radiotherapy(VMAT) showed $95.84{\pm}0.75%$ of $D_{95%}$ on the clinical target volume, significantly higher than that of 3D-CRT. The $D_{95%}$ value of the total tumor volume was slightly higher than the other treatments. In Cyberknife treatment, the dose to the normal organs was significantly lower than other treatments. Overall, the maximum dose and mean dose to the heart were $26.2{\pm}6.12Gy$ and $1.88{\pm}0.2Gy$ in VMAT treatment and $20.25{\pm}9.35Gy$ and $1.04{\pm}0.19Gy$ in 3D-CRT therapy, respectively. Conclusion : In comparison on 3D-CRT and VMAT, most of the dosimetric parameters for the evaluation of the treatment plan showed similar values, so that there is no significant difference in treatment plan evaluation. It is possible to select the treatment method according to the patient's anatomical structure or possibility of breath control. Cyberknife treatment is very useful treatment for normal organs because of its accurate dose exposure to the tumor volume However, it has restrictions to treat the local area, to have relatively long treatment time and to involve invasive procedure.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.129-140
• /
• 2021

The study investigates the correlation between the seasonal changes in the absorption of fine dusts and the fine structure of surface on each type of street tree, such as Quercus myrsinifolia, Quercus glauca, Quercus salicina, Camellia japonica, and Prunus × yedoensis in the southernareas of Korea. The absorption ranges of fine dust were 31.51~110.44 ㎍/cm² in January, 23.20~79.30 ㎍/cm² in November, 22.68~76.90 ㎍/cm² in May, and 9.88~49.91 ㎍/cm² in August. The absorption value was about 54.4% higher in January than in May. With the grooves and hairs on the leaf surface and lots of wax, Q. salicina seems related to the high absorption rate of fine dust for each fine dust particle size. The one with gloss and smooth leaf surface has a low amount of wax. C. japonica Prunus × yedoensisshowed a low absorption rate of fine dust in each season. Whereas the increase in porosity density, length, and leaf area size can be related to the reduced PM and increasedabsorption rate, the leaf surface roughness, total wax amount, and porosity width can be related to the increase in the PM absorption rate. There was also a high correlation between the total wax amount and absorption rate of the leaf surface at the size of PM_0.2 than PM₁₀ and PM_2.5. These results imply that the quantitative and qualitative trais of leaf, such as wax amounts and leaf surface,can increase the absorption of fine dusts, and the small-sized particles seem to be highly adsorbed with the high wax amounts.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.133-150
• /
• 2022

Calling the 21th century the age of 'cultural competition' is not an overstatement. In an era of globalization, we try to find the 'identity of our country' in our culture. 'Culture' is the unique ethnicity of the people of each country that reflects the traces of their lives. As the world is transforming into a multi-dimensional place, traditional patterns in reference to cultural uniqueness and original formativeness are the brands that represent the people. France's luxury brand, GOYARD's Y-shaped pattern naturally made during the persistent traditional handmade process is still France's representative corporate brand and is considered prestigious even after 150 years have passed. On the other hand, in low-income countries, patterns created in the natural process of weaving fabrics are succeeded as a unique cultural aesthetic and are loved by people all over the world. Like this, people living in the global multi-dimensional world look to attain the framework 'One Planet Perspective' which is to succeed their own native culture and preserve the unique culture of others. For example, in the process of international relief organizations delivering relief supplies to Columbia's "Wayu tribe" due to the water shortage in 2013, a handmade product, "Mochila Bag" was discovered. Triggered by this incident, Europe and Korea decide to import it to support the livelihood of the "Wayu tribe." Also, the aesthetic and cultural values of the traditional culture in minority tribes that have evolved through thousands of years have been listed on UNESCO and preserved worldwide. Likewise, culture doesn't suddenly appear overnight, but rather the brand representing the company is the pattern used in the trend of the era kept for over 100 years. Moreover, patterns that reflect the country's identity are inherited as the unique aesthetic of the culture. Our country does inherit the unique aesthetic of our culture, but doesn't have a 'strong image' that displays the practical value reinterpreted creatively and aesthetically to fit the modern trend. Traditional patterns are important in perspective of study and theoretical research, but the brand's image using those patterns is a new medium from the past existence continuing to the current tradition. Furthermore, this study suggests that the image of a company that uses traditional patterns will have high economical potential as a national brand.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.151-174
• /
• 2022

According to the "Special Act on the Restoration and Maintenance of the Core Relics of the Shilla Kingdom" enacted in 2019, the Shilla Kingdom refers to the capital of Shilla and Unified Shilla period, and refers to Gyeongju, where the king lived, and the nearby area. Shilla Wanggyeong is a heritage registered on the UNESCO World Heritage List in 2000 under the name of Gyeongju Historic Site and belongs to Wolseong District, Hwangnyongsa District, and Daeneungwon District among the five districts registered as Gyeongju Historic Site. Unlike the Namsan and Sanseong districts, the Shilla Kingdom is a heritage consisting mostly of archaeological sites without physical substance. Gyeongju City sought to promote local tourism while providing more direct experiences to visitors by restoring the heritage that constitutes the Shilla Kingdom. Starting with the restoration of Woljeonggyo Bridge in 2005, the Shilla Wanggyeong restoration project began in earnest. Gyeongju City tried to restore the building site on the west side of Donggung Palace and Wolji after Woljeonggyo Bridge, but it was canceled due to opposition from the UNESCO World Heritage Committee. The World Heritage Committee opposed the restoration and recommended a heritage impact assessment for similar projects in the future. During the miscarriage impact assessment procedure, there is an OUV attribute analysis process of the heritage to be evaluated. This study intends to preemptively derive OUV attributes for the Silla Kingdom through literature and overseas case analysis. In the case of literature research, domestic and foreign research data related to the UNESCO World Heritage Convention and World Heritage Management were examined, and in overseas cases, the architectural works of Krakow Historical District, Stonehenge and Abbury Geoseok Ruins in England, and Le Corbusier were analyzed. Through this, the outstanding universal value attributes of the Silla Kingdom were derived. This study is expected to be used as a reference in the process of restoration projects of other heritage constituting the Shilla Kingdom or construction plans in nearby areas in the future and serve as an indicator to improve the management system of the Shilla Kingdom more efficiently from the perspective of world heritage.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.85-105
• /
• 2021

In this study, a case study was conducted on Advanced Nano Products Co.,Ltd, a company that was established in 2000 and has the core technology to produce and commercialize nano materials and ultrafine nano powders based on nano technology. Deviating from the general case study, a case study analysis frame was set based on the theory of technology management and industry-university cooperation theory, and cases were analyzed. In this case study, Advanced Nano Products Co.,Ltd. was analyzed from two analytical perspectives: the establishment of a Management Of Technology system within the company and the Industry-Academic Cooperation activity. Based on this theoretical-based analysis framework, company visit interviews and related data research and analysis were conducted. As a result of the study of the case company, it was possible to derive how the technology management and industry-university cooperation affect the growth stage of the company as follows. First, the strategic use of technology management is an important factor in strengthening the competitive advantage and core competencies of venture companies, and for survival and growth of startups in the early stages. Second, strategic use of technology management and patents and establishment of a patent management system are a part of business strategy and play a pivotal role in corporate performance. Third, the human and material infrastructure of universities affects the growth of companies in the early stage of start-up, and the high utilization of industry-university cooperation promotes the growth of companies. Fourth, continuous industry-academic cooperation activities in the growth and maturity stages of a company's growth stage are the basis for activating external exchanges and building networks. Lastly, technology management and industry-university cooperation were found to be growth factors for each growth stage of a company. In order for a company to develop continuously from the start-up to the growth and maturity stages, it is necessary to establish a technology management system from the beginning and promote strategic technology management activities. In addition, it can be said that it is important to carry out various industry-academic cooperation activities outside the company. As a result of the case analysis, it was found that Advanced Nano Products Co.,Ltd, which performed these two major activities well, overcame the crisis step by step and continued to grow until now. This study shows how the use of technology management and industry-academic cooperation creates value in each growth stage of technology-based venture companies. In addition, its active use will play a big role in the growth of other venture companies. The results of this case study can be a valid reference for growth research of technology start-up venture companies and related field application and utilization.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.10
• /
• pp.61-74
• /
• 2022

Considering that the number of cases in which a structure foundation is located on weathered rock has been increasing recently, for adequate design bearing capacity of a foundation on weathered rock, allowable bearing capacities of such foundations in geotechnical investigation reports were studied. With reference to the study results, the allowable bearing capacity of a foundation on weathered rock was approximately 400-700 kN/m², with a large variation, and was considered a conservative value. Because the allowable bearing capacity of the foundation ground is an important index in determining the foundation type in the early design stage, it can have a significant influence on the construction cost and period according to the initial decision. Thus, in this study, six large-scale plate-bearing tests were conducted on weathered rock, and the bearing capacity and settlement characteristics were analyzed. According to the test results, the bearing capacities from the six tests exceeded 1,500 kN/m², and it shows that the results are similar with the one of bearing capacity formula by Pressuremeter tests when compared with the various bearing capacity formula. In addition, the elastic modulus determined by the inverse calculation of the load-settlement behavior from the large-scale plate-bearing tests was appropriate for applying the elastic modulus of the Pressuremeter tests. With consideration of the large-scale plate-bearing tests in this study and other results of plate-bearing tests on weathered rock in Korea, the allowable bearing capacity of weathered rock is evaluated to be over 1,000 kN/m². However, because the settlement of the foundation increases as the foundation size increases, the allowable bearing capacity should be restrained by the allowable settlement criteria of an upper structure. Therefore, in this study, the anticipated foundation settlements along the foundation size and the thickness of weathered rocks have been evaluated by numerical analysis, and the foundation size and ground conditions, with an allowable bearing capacity of over 1,000 kN/m², have been proposed as a table. These findings are considered useful in determining the foundation type in the early foundation design.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.1-9
• /
• 2022

The effect of sediments in a waste dumping area on marine organisms was evaluated using sediment toxicity tests with a benthic amphipod (Monocorophium acherusicum) and bioluminescent bacterium (Vibrio fischeri) in accordance with the Korean Standard Method for Marine Wastes (KSMMW). Nine sites in the East Sea-Byeong, East Sea-Jeong, and Yellow Sea-Byeong areas were sampled from 2016 to 2019. The test results showed that the relative average survival rate (benthic amphipods) and relative luminescence inhibition rate (luminescent bacteria) were below 30%, which were judged to be "non-toxic." However, in the t-test, a total of 12 benthic amphipod samples (6, 1, 1, and 4 in 2016, 2017, 2018, and 2019, respectively) were significantly different (p<0.05) from the control samples. To identify the source of toxicity on benthic amphipods, a simple linear regression analysis was performed between the levels of eight heavy metals (Cr, As, Ni, Cd, Cu, Pb, Zn, and Hg) in sediments and the relative average survival rate. The results indicated that Cr had the highest contribution to the toxicity of benthic amphipods (p = 0.000, R2 = 0.355). In addition, Cr was detected at the highest concentration at the DB-85 station and exceeded the Marine Environment Standards every year. Although the sediments were determined as "not toxic" according to the ecotoxicity criteria of the KSMMW, the results of the statistical significance tests and toxicity identification evaluation indicated that the toxic effect was not acceptable. Therefore, revising the criteria for determining the toxic effect by deriving a reference value through quantitative risk assessment using species sensitivity distribution curves is necessary in the future.

• Journal of The Korean Association For Science Education
• /
• v.43 no.1
• /
• pp.1-15
• /
• 2023

As the social and economic value of living modified organisms (LMOs) increase, so do the potential risks they pose to humans and the environment. Therefore, all laboratories using LMOs must establish an LMO laboratory in accordance with the standards required by regulations. Recently, in high school, LMO-related experimental programs have been developed for their educational effects. Also, in this case, it is necessary to comply with the regulation for LMO laboratories. However, high schools are still unfamiliar with the LMO laboratory, and it is difficult for teachers to manage an LMO laboratory because its implementation applies the same standards to general research institutes. In this study, we used causal chain analysis to discover the difficulties each teacher faced while setting up an LMO laboratory by examining three cases. The difficulties experienced by teachers are as follows: the first problem is "reluctance to set up an LMO laboratory," because of "administrative tasks for laboratory registration" and "difficulty in persuading colleagues." The second problem is a difficulty for teachers to operate LMO laboratory in blind spots, due to "inflexible installation and closure," "medical waste disposal," and "LMO education that does not fit the school context." Through this study, although the difficulty of running an LMO laboratory is caused by a lack of necessity and insufficient consideration of the school context, the more fundamental cause was a lack of collaborative planning between the educational field and the operating institutions. The teachers who participate in this research suggest that "using shared LAB" and "preparing opportunities for knowledge sharing" can be considered as strategies for operating the school's LMO laboratory. We feel that this study will provide a useful reference for teachers or schools planning to build an LMO laboratory.

• (The) Research of the performance art and culture
• /
• no.22
• /
• pp.253-285
• /
• 2011

The number of "Performing Arts Festivals" is growing increasingly in South Korea. This trend is mainly held in large cities which are difficult to communicate closely among residents. South Korea, while the pace of city life and speed of development are very fast, increasing number of "Performing Arts Festivals" with communal characteristics is in the natural process of festival evolution in large cities. In the evolution of the contemporary festival, it is natural to see some increase of modern festival after the development of traditional and folk festivals. It is important that the "Performing Arts Festivals" express the two elements, artistic character and festivity, not only in distinctively but also in harmony. The "Performing Arts Festivals" should consider the process of the organization, human resources, networking systems of the human communication process, resource use, etc. For the success of the festival, we must obtain the complementary effects between two attributes:festival characteristics and artistic senses. Therefore, we chose the 'Festival d'Avignon' as the reference of the total representation of artistic characteristics and festivity. From the case of the Festival d'Avignon, we get the implications of the development of performing arts festival in South Korea. To explain the festival value and artistic significance of the Festival d'Avignon, we explained the spontaneity and openness to public participation, the relationship between spectators and works, the representation of memory and communicative image, etc. To explain the artistic attributes of the 'Festival d'Avignon', we explained the mission to reconcile the artistic and the popular, to promote the artistic know-how, understanding how to communicate with the public, to consider more artistic quality than commercial benefits. Essentially, this study shows the meaning and the vision to forecast the future as well as the recent proliferation in various fields of Performing Arts Festivals. This study may help to improve analytical precision of Performing Arts Festivals.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.45-56
• /
• 2023

In stream ecosystem assessment, RIVPACS, which makes a simple but clear evaluation based on macroinvertebrate community, is widely used. In this study, a preliminary study was conducted to develop a RIVPACS-type model suitable for Korean streams nationwide. Reference streams were classified into two types(upstream and downstream), and a prediction model for macroinvertebrates was developed based on each family. A model for upstream was divided into 7 (train): 3 (test), and that for downstream was made using a leave-one-out method. Variables for the models were selected by non-metric multidimensional scaling, and seven variables were chosen, including elevation, slope, annual average temperature, stream width, forest ratio in land use, riffle ratio in hydrological characteristics, and boulder ratio in substrate composition. Stream order classified 3,224 sites as upstream and downstream, and community compositions of sites were predicted. The prediction was conducted for 30 macroinvertebrate families. Expected (E) and observed fauna (O) were compared using an ASPT biotic index, which is computed by dividing the BMWPK score into the number of families in a community. EQR values (i.e. O/E) for ASPT were used to assess stream condition. Lastly, we compared EQR to BMI, an index that is commonly used in the assessment. In the results, the average observed ASPT was 4.82 (±2.04 SD) and the expected one was 6.30 (±0.79 SD), and the expected ASPT was higher than the observed one. In the comparison between EQR and BMI index, EQR generally showed a higher value than the BMI index.