• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.685-688
• /
• 2016

SBAS(Satellite Based Augmentation System) broadcasts the correction message based on satellite communication to improve the positioning accuracy of GNSS user. For this reason, SBAS is actively being utilized on navigation part. To apply SBAS to navigation part, it should satisfy not only accuracy but also integrity, continuity, availability, coverage requirements and so on. Since SBAS reference station is the base infrastructure of SBAS, it is the main factor to determine the environment, position, and geometry of reference stations to achieve SBAS service performance. Therefore, a site environmental analysis should be performed prior to the selection of SBAS reference station. In this paper, it performs the environmental analysis of NDGPS(Nationwide Differential GPS) reference station sites on the premise that SBAS reference station will be co-operated in the same site of NDGPS operated by MOF(Ministry of Oceans and Fisheries). The environmental analysis is conducted as carrying out the visibility analysis of GPS satellite and interference analysis. This paper also presents the brief procedures and requirements for site survey of SBAS reference station.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.04a
• /
• pp.36-47
• /
• 1998

The test transimissionof DGPS correction data has been carried out since early 1996. The data has been sent from marine radiobeacon station at Changgi Gap Ligthouse. It was the first test brosdcast of DGPS correction data based on midium frequency of marine radiobeacon where transmission power and rate are 300W and 100bps respectively. However, there has not been any scientific study on the characteristic of the accuracy of a marine DGPS/radiobeacon. Accordingly. this paper investigates the accuracy of the system, which is currently operating in 310KHz. As a result , planned 8 reference station and coverage verified that the differential positioning accuray using themarine radiobeacon is sufficient to ensure the safetyof marine activities around the coast of Korea(position error of distance 107NM at reference station was about10m(drms)).

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.83-89
• /
• 2023

The Korea Augmentation Satellite System (KASS) system is a Satellite Based Augmentation System (SBAS) under development to provide APV-I SBAS service in the Republic of Korea. The KASS ground segment generates correction and integrity information for GPS measurements of KASS users using the accurate positions of KASS Reference Station (KRS) antenna phase centers. For this reason, the accuracy of KRS reference points through geodetic survey campaigns is one of the important factors for providing the KASS service in compliance with the required navigation performance. In order to obtain accurate positions, two geodetic survey campaigns were performed at several reference points, such as Mark, Center of Mast at Ground Level (CMGL), and Center of Hole in Top Plate (CHTP), of each KRS site using three different survey methods, the Virtual Reference Station (VRS), Flächen Korrektur Parameter (FKP), and raw data post-processing methods. By comparing and analyzing the results, the computed coordinates of the reference points were verified and Antenna Phase Center (APC) positions were calculated using KRS Antenna Reference Point (ARP) data, and the first KASS Site Acceptance Test (SAT#1) was performed successfully using the verified APC coordinates. After the first site survey activities, the KASS operators should maintain the coordinates with the required performance such that the overall KASS navigation performance commitment is guaranteed during the lifetime of 15 years. Therefore, the maintenance plan for the KRS antenna coordinates should be developed before the commissioning of KASS operation planned after 2023. Therefore, this paper presents a geodetic survey method selected for the maintenance activities and provides the rationale for using this method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.390-392
• /
• 2013

In the paper, design and implementation results of the reference station software are described for the WA-DGNSS that is currently developed in pseudo-realtime concept. The reference software is designed and implemented by applying the object oriented methodology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1350-1357
• /
• 2012

Korean NDGPS, which consists of the ocean-based reference station of 11 site and the land-based reference station of 6 sites, are operating. The land-based reference stations provide the output power of 500W, the service shadow regions are occurred due to mountains and nation topography. In this paper, the service coverages of land-based reference stations are analyzed in the viewpoint of output power enhancements of land-based reference stations within 1KW. Also, we suggest virtual land DGPS reference stations 2 sites to resolve the service shadow regions.

• Journal of Navigation and Port Research
• /
• v.45 no.1
• /
• pp.26-32
• /
• 2021

In ocean field, the spread of the Fourth Industrial Revolution based on information and communication technology requires high precision and stable PNT&D (Position, Navigation, Timing and Data). As the IMO (International Maritime Organization) and IALA (The International Association of Marine Aids to Navigation and Lighthouse Authorities) are requiring backup systems due to mitigate vulnerabilities and the increase of dependency on GNSS (Global Navigation Satellite System), Korea is conducting a research & development of R-Mode. An DGPS (Differentiate Global Positioning System) reference station that uses MF, an existing maritime infrastructure, and AIS (Automatic Identification System) base stations that use 34 integrity station and VHF will be utilized in this study to avoid redundant investment. Because there are radio shadow areas that display low signal levels in the west sea, the establishment of new R-Mode reference and integrity station will be intended to resolve problems regrading the radio shadow area. Because the frequency has a characteristic in that radio wave transmits well along the ground (water surface) in low frequency band, simulation and measurement were conducted therefore this paper to propose candidate sites for R-Mode reference and integrity station resulted through p wave's propagation characteristics analysis. Using this paper, R-Mode reference and integrity station can be established at appropriate locations to resolve radio shadow areas in other regions.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.349-352
• /
• 2005

The telematics positioning testbed is an infrastructure to test and verify positioning technology, the sub-component of telernatics system. The positioning testbed provides the environment of performance analysis for acquisition of static and dynamic positioning information using telematics vehicle. This testbed consists of onboard positioning system, positioning reference station and lab positioning server. The onboard positioning system equipped in telematics vehicle, consists of target positioning system, reference positioning system, and analysis tool. A equipment acquiring high precision positioning data obtained from GPS combined with IMU was set as a reference positioning system. Analysis tool compares observed positioning data with high precision positioning information from a reference positioning system, and processes positioning information. Positioning reference station is RTK system used for reducing atmosphere error, and it transmits corrected information to reference positioning system. Positioning server which is located at laboratory manages positioning database and provides monitoring data to integrated testbed operating system. It is expected that the testbed supports commercialization of telernatics technology and services, integrated testing among component technology and verification.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.135-142
• /
• 2013

Recently, it is a pretty well known way to compute GPS/INS using Continuously Operating Reference Station (CORS) and Network-based RTK for obtaining Exterior Orientation (EO) parameters of aerial photogrammetry. In this study, it is way to compute Exterior Orientation (EO) parameters using ground base stations, using Continuously Operating Reference Station (CORS) broadcast orbits and International GNSS Service (IGS) rapid orbits. And the residuals of Exterior Orientation (EO) parameters were computed based on the results of ground base station. As a result, the case of using SmartBase to obtain Exterior Orientation (EO) parameters was showed the high accuracy of X, Y, K more than using Continuously Operating Reference Station (CORS) of National Geographic Information Institute (NGII). Also, distance and direction of Continuously Operating Reference Station (CORS) of National Geographic Information Institute (NGII) from ground base station affected Exterior Orientation (EO) parameters. And different forms of residuals were shown according to the aerial photo courses.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.239-244
• /
• 2022

R-Mode is terrestrial based Global Navigation Satellite System (GNSS) backup radio navigation technology which used existing maritime information service infrastructure. It has advantages on reduce the cost and reutilize the frequency resource. In this paper, we propose a method to develop a medium-frequency (MF) band R-Mode transmitting station by utilizing the currently operating Differential GNSS (DGNSS) reference station infrastructure. To this end, the considerations for co-operating the DGNSS reference station and the MF R-Mode transmitting station are analyzed. In this process, we also analyze what is necessary to configure the communication system as a navigation system for range measurement. Based on the analysis result, MF R-Mode transmitting station system is designed and architecture is proposed. The developed system is installed in the field, and the performance evaluation results is presented.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.207-216
• /
• 2015

Since the distribution of SBAS reference stations is one of the most important factors that affect the system performance, the effects of the distribution should be analyzed carefully from the beginning of the program to develop the system conforming to given performance requirements. The reference stations of KASS, the Korean SBAS, are planned to be installed only inside South Korea, which limits the number and area of those. It differentiates KASS from others that have much larger sites. In this paper, the author analyzes the performance impact on UDRE and ${\delta}UDRE$ for GPS and GEO due to the limitations by a series of simulations, which showed that the UDRE performance depends on the diversity of the reference station distribution and the impact on the GEO UDRE is significant. The paper concludes by providing KASS design and development considerations to minimize the possible performance risks due to the limitations of KASS reference station distribution.