• Journal of Radiation Protection and Research
• /
• v.33 no.4
• /
• pp.167-172
• /
• 2008

Recently a high-quality voxel model of a Korean adult male was constructed at Hanyang University by using very high resolution serially-sectioned anatomical images of a cadaver, which was provided by the Korean Institute of Science and Technology Information (KISTI). Most existing voxel phantoms are developed based on an individual in the supine posture. This study converted the HDRK-Man voxel model into surface model and adjusted the flattened back of the HDRK-Man to a normal shape in the upright posture using 3D graphic softwares such as $3D-DOCTOR^{TM}$, $Rapidform^{(R)}$2006, $Rhinoceros^{(R)}$4.0, $MAYA^{(R)}$8.5. The effective doses of adjusted model were compared with those of unadjusted model for some standard irradiation geometries (i.e., AP, PA, LLAT, RLAT). In general, the differences were not very large and, among those, the largest difference was found for the PA radiation geometry, as expected. These methodologies can be used for the development of various deformed posture models of HDRK-Man in the later stage of this project.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1605-1616
• /
• 2004

The purpose of this study was to investigate the commonly accepted ease for a custom-fit business jacket, which provides all customers with the optimum fit regarding their individual body sizes, shapes as well as their personal preference, and also to characterize the factors which affects the ease amount, thereby, supply the reference data to manufacturers of the apparel industry. This study consisted of anthropometric measurements as well as sensory evaluations, and analysed ease amount by body sizes, ages, fit satisfaction, self-perception of body, and the prefered fit levels. There were 272 subjects for anthropometric measurement of which 128 subjects were applied for ease analysis and sensory evaluation. The subjects were males of 20 to 65 years old. The ease at chest was the most sensitive to body sizes and shapes, while waist and hip were easily modified to accommodate the silhouette of the jacket. The main dimensions affecting individual perceptions of fit and ease were the characteristics of body shape, in particular, girth, followed by age. Customers paided most attention to the shoulder fit while customers who preferred a more fitted line showed more concern with ease for jacket fit. It was clearly observable in case of waist fit preference. In addition, the preferred fit at chest, waist and hip would be changed by the perception of ons's hip size.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.219-228
• /
• 2013

The surveillance imaging equipments are functioning to observe the shape of the target in real time or to measure its location precisely. The roles of such equipments are becoming more important in today's weapon systems.The aforementioned imaging equipments can be classified based on the modes of operations such as fixed, installed on cars, or composite of those. Also, according to different concepts of sensor operation, a separate type uses independent housing for each sensor whereas in a composite type a set of multiple sensors are housed into a unit altogether. The sensors in general have magnetism, thereby introducing the possible negative effects, particularly in the composite types, in locating the reference position, which is carried out by the digital compass. The use of shielding material/housing could be an option but results in increased weight and reduced portability, restricting its use in composite type equipments. As such, the objective of this paper is to study on how to reduce such magnetic effects on the position location. To do so, in the absence of magnetic shielding, a variety of sensor positions were first modeled. By combing the result with the fact that the functions of PAN & Tilt are used in the equipments, a new position location algorithm is proposed. The use of the new algorithm can automate the position location process as compared to the manual process of the existing approach. In the algorithm developed, twelve locations are measured in connection with both the azimuth and elevation angles in comparison to the six locations alone around the azimuth angle. As a result, it turns out that the measurement range has been widened but the measurement time reduced. Also, note that the effect of errors the operators may make during measurement could be reduced.

• Cartoon and Animation Studies
• /
• s.37
• /
• pp.143-158
• /
• 2014

In the modeling processes of 3D computer animation, methods to build optimal work conditions to realize real forms for more efficient works have been advanced. Digital sculpting software, published in 1999, ZBrush has been positioned as an essential factor in character model work requiring of realistic descriptions through different manufacturing methods from previous modeling work processes and easy shape realization. Their functional areas are expanding. So, in this production case paper, as a method to product more optimized animation character models, the efficiency of production method linking digital sculpting software (Z-Brush) and animation production software (Maya) was deliberated and its consequences and implications are suggested. To this end, first the technical features of polygon modeling and Retopology were reviewed. Second, based on it, the efficiency of animation character modeling work processes through step linking ZBrush and Maya suggested in this paper was analyzed. Third, based on the features drawn before, in order to prove the hypothesis on modeling optimization method suggested in this paper, the production process of character Dumvee from a short animation film, 'Cula & Mina' was analyzed as an example. Through this study, it was found that technical approach easiness and high level of completion could be realized through two software linked work processes. This study is considered to be a reference for optimizing production process of related industries or modeling-related classes by deliberating different modeling process linked systems.

• Journal of Korean Society for Quality Management
• /
• v.46 no.2
• /
• pp.301-310
• /
• 2018

Purpose: The purpose of this study is to investigate the effect of work intensity on fit factor and affective quality of the dustproof Background: Among the victims who suffer pneumoconiosis due to the inhalation of toxic substances or the lack of oxygen during the work, the proportion of the victims is larger than the other causes. Wearing a respirator may prevent pneumoconiosis, but it can be hazardous to workers because of the leakage through filters, cartridges, exhaust valves, broken parts, and face-to-face contact. Despite leakage through the contact area between the mask and the face has various causes such as the wearer's activity, sweat accumulation, facial shape, etc., There is a lack of relevant research and regulation compared to developed countries that have already institutionalized the law 30 years ago and give the right to sell through a test Method: The work intensity was adjusted by walking or running at 6km/h and 11km/h on the treadmill, and tasks were defined with reference to the test procedure and the exercise sequence applied in the face leakage test of the dustproof mask. And fit factor was measured objectively using 'Respirator Fit Tester 8038' which measures fit factor calculated by dividing the number of dust present outside the mask by inside the mask. In addition, affective quality was classified by the ease of use, ease of breathing, and ease of wearing, and was measured using the 5-point likert scale questionnaire. Results: There was a significant difference in fit factor, ease of breathing, and wearing convenience according to work intensity and no significant difference in ease of use(${\alpha}=0.01$). And when the work intensity was high, fit factor, ease of breathing, and wearing convenience were all lower than when the work intensity was low. Conclusion: In Korea, it is necessary to consider consideration of the work intensity when testing the leakage rate of the face part for safety certification of the respiratory protective equipment, When developing a mask, it should be possible to maintain high adhesion even under intense, active situation and high temperature conditions by selecting materials, improving the wearing style, and expanding the adjustable range.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.499-508
• /
• 2013

This article presents a new method for semi-automatic extraction of building information (height, shape, and footprint location) from monoscopic urban scenes. The proposed method is to expand Semi-automatic Volumetric Shadow Analysis (SVSA), which can handle occluded building footprints or shadows semi-automatically. SVSA can extract wrong building information from a single high resolution satellite image because SVSA is influenced by extracted shadow area, image noise and objects around a building. The proposed method can reduce the disadvantage of SVSA by using multi-spectral images. The proposed method applies SVSA to panchromatic and multi-spectral images. Results of SVSA are used as parameters of a cost function. A building height with maximum value of the cost function is determined as actual building height. For performance evaluation, building heights extracted by SVSA and the proposed method from Kompsat-2 images were compared with reference heights extracted from stereo IKONOS. The result of performance evaluation shows the proposed method is a more accurate and stable method than SVSA.

• Korean Institute of Interior Design Journal
• /
• v.24 no.1
• /
• pp.178-188
• /
• 2015

This study has the main objective of being of help as a reference data for the application of the finishing materials when designing the interior of the chapel of the church space through analysis of the finishing materials against the chapels of church space which has complex function. As precedent studies for this, the composition of the function and concept of the church space was surveyed and the complex function of the church space was surveyed. The theoretical surveyed was performed according to the casual composition, behavior of the community and role and location of the duties of the church members. The case objects were 10 chapels constructed by 5 professional interior design companies. The content of the analysis was the finishing materials in the chapels and their application characteristics. The detailed considerations to be referred to when designing the interior of the chapels of church space in the future were proposed. The analysis result of the application of the finishing materials according to the locational function of the chapels of church space can be explained as follows. First, the platform area was the characteristic of applying finishing materials which induce visual immersion. As for the floor materials in the platform, in order to minimize the floor sound and vibration phenomenon occurring during movements, noise insulation and dust protection rubber sheet was place and on top of it the floor or the carpet was placed. Second, the Choir area had the difficult problem of having to consider the appropriate sound absorption occurring due to the proliferation of sound and performance of classical instruments at the same time. However, in the case, this problem was solved through the sculptures of convex shape. Third, since the scheelite is a space where many people move around, the finishing material which absorbs sound was mainly used. Fourth, the entrance area was composed of thick wall materials compared to other walls, and the sound absorption character was most significantly considered when applying the finishing material. Fifth, the broadcasting room was composed either in independent type or an open type and performed its function and the main finishing materials was transparent glass which was highest use frequency.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.106-111
• /
• 2009

Total scatter factor ($S_{cp}$), head scatter factor ($S_c$) and phantom scatter factor ($S_p$) are very important for accurate radiation therapy at stereotactic radiosurgery (SRS) with irregular field shape using micro-MLC and intensity modulated radiation therapy (IMRT) including many small field sizes. In this study we measured and compared $S_{cp}$ with reference ion chamber, pinpoint chamber and diode detector and adapted the resuls form diode detector. Head scatter factors for small field sizes were also measured with diode detector covered 1.5 cm-thick solid water build-up cap. Some errors like as electron contamination of 1~3% were included in the values of Sc but trend of total results of $S_c$ was coincided with basic theory. Phantom scatter factors for small field sizes were calculated form $S_{cp}$ and $S_c$. The results of $S_p$ were compared and were well-agreed with those of other authors.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.190-194
• /
• 2017

Oyster mushrooms are one of the most popular edible mushrooms in Korea. The 'Santari' cultivar bred in this study, which belongs to the species Pleurotus pulmonarius, is a new oyster mushroom cultivar for bottle culture. It was bred by mating monokaryons isolated from 'GMPO20404' and 'Hosan'. The optimum temperature for 'Santari' mycelial growth was $26-29^{\circ}C$ on PDA medium, and the temperatures for primordium formation and for growth of the fruit body on sawdust medium were $22^{\circ}C$ and $20^{\circ}C$, respectively. It took 34 days to complete the spawn run, 3 days to form primordia, and 3 days to finish fruit body growth in the bottle culture. The fruit body pilei were round in shape and brownish, whereas the stipes were long, thick, and white. The yield per bottle of 'Santari' was 172 g/1,100 mL, which was 43% higher than that of the reference cultivar ('Hosan'). The springiness, cohesiveness, gumminess, and brittleness of the stipe tissue were 87%, 82%, 193 g, and 16 kg, respectively. These physical property values of 'Santari' were lower than those of the control cultivar, except for the cohesiveness.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1286-1298
• /
• 2005

The genus Paenibacillus is a new group of bacilli separated from the genus Bacillus, and most of species have been isolated from soil. In the present study, we collected 450 spore-forming bacilli from the roots of winter crops, such as barley, wheat, onion, green onion, and Chinese cabbage, which were cultivated in the southern part of Korea. Among these 450 isolates, 104 Paenibacillus-like isolates were selected, based on their colony shape, odor, color, and endospore morphology, and 41 isolates were then finally identified as Paenibacillus spp. by 16S rDNA sequencing. Among the 41 Paenibacillus isolates, 23 were classified as P. polymyxa, a type species of the genus Paenibacillus, based on comparison of the 16S rDNA sequences with those of 32 type strains of the genus Paenibacillus from the GenBank database. Thirty-five isolates among the 41 Paenibacillus isolates exhibited antagonistic activity towards plant fungal and bacterial pathogens, whereas 24 isolates had a significant growth-enhancing effect on cucumber seedlings, when applied to the seeds. An assessment of the root-colonization capacity under gnotobiotic conditions revealed that all 41 isolates were able to colonize cucumber roots without any significant difference. Twenty-one of the Paenibacillus isolates were shown to contain the nifH gene, which is an indicator of $N_{2}$ fixation. However, the other 20 isolates, including the reference strain E681, did not incorporate the nifH gene. To investigate the diversity of the isolates, a BOX-PCR was performed, and the resulting electrophoresis patterns allowed the 41 Paenibacillus isolates to be divided into three groups (Groups A, B, and C). One group included Paenibacillus strains isolated mainly from barley or wheat, whereas the other two groups contained strains isolated from diverse plant samples. Accordingly, the present results showed that the Paenibacillus isolates collected from the rhizosphere of winter crops were diverse in their biological and genetic characteristics, and they are good candidates for further application studies.