• 대한치과교정학회지
• /
• 제27권1호
• /
• pp.45-54
• /
• 1997

본 연구의 목적은 bionator를 사용한 II급 1류 부정교합 환자의 치료후 결과를 토대로 치료전에 치료후 결과를 예측할 수 있는 항목들을 알아봄으로써 성장하는 II급 1류 부정교합을 가진 환자들의 치료에 도움을 얻는데 있다. bionator를 사용한 앵글 II급 1류 부정교합 환자 48명의 치료후 두부방사선계측사진을 통해 치료결과가 양호한 군(1군)과 치료결과가 불량한 군(2군)으로 나눈 후 양군의 치료전 측모두부방사선계측사진의 비교분석을 통해 두군 사이에 차이를 보이는 계측항목들을 알아보았고, 판별분석을 통해 다음의 결과를 얻을 수 있었다. 1. 치료전 골격계측 항목으로는 ANB, facial convexity angle, AB to facial plane angle 등이, 치성계측 항목으로는 L1 to A-Pog, U1 to facial plane, L1 to facial plane 등이, 연조직 계측항목으로는 Ricketts esthetic line 상에서 상, 하순의 돌출도가 양군 사이에 유의한 차를 보였다(SAS t-test, p<0.05). 2. 판별분석을 통해 유의성있게 나타나는 항목의 순위를 본 결과 L1 to facial plane, 하순의 돌출도, ANB과 FMIA 등이 양군의 치료결과의 예측에 도움을 주는 것으로 나타났다. 3. 증감판별분석을 통해 서로 독립적이며 상관계수가 높은 3개의 변수 - L1 to facial plane, articular angle, ANB- 를 선택하였으며, 이를 토대로 판별식을 도출하였다.

• 대한치과교정학회지
• /
• 제20권1호
• /
• pp.87-100
• /
• 1990

This study was designed to compare the craniofacial structure of orthodontic patients with that of normal adult. For that purpose, 61 male and 64 female adults with normal occlusion were selected and utilizing the cephalogram that had taken under the natural head position and computerized graphic image, the special position of each anatomical structure against true horizontal and vertical reference plane was investigated. The following results were obtained. 1. The absolute special positions of each anatomic structure were calculated. 2. The inclination of Sella-Nasion plane to true horizontal plane was $8.3^{\circ}{\pm}3.9$ in male and $9.3^{\circ}{\pm}3.2^{\circ}$ in female. 3. The inclination of Frankfort horizontal plane to true horizontal plane was $1.3^{\circ}{\pm}3.0^{\circ}$ in male and $1.7^{\circ}{\pm}3.0^{\circ}$ in female. 4. The dimensions of Nasion-sella and Nasion-Anterior nasal spine to be used as the basic units of mesh diagram were $70.7mm{\pm}3.1mm$, $61.8mm{\pm}2.7mm$ in male and $67.8mm{\pm}3.3mm$, $57.0mm{\pm}2.6mm$ in female respectively. 5. The standard templates of craniofacial structure of male and female adult normal group were constructed. 6. The mesh diagrams of craniofacial structure of male and female adult normal group were constructed.

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.85-94
• /
• 1984

The purpose of this study was to investigate treatment effectiveness of TENS and bite plane for bruxism and TMJ dysfunction patients. The electromyograms were made on males aged 23 to 25 with sound stomatognathic system, 5 males bruxism aged 24 to 27, and 1 male and 4 females TMJ dysfunction patients (right TMJ pain) aged 14 to 33. The electromyographic study was limited to the middle of masseter muscle and anterior temporal muscle. The electromyographic study was carried out with 8-channel EM2 (Myotronics Research Inc.) and was taken 5 mandibular positions of clinical rest position, clench intercuspal position, clench protruded, cluch right, clench left. The 2 pairs of surface electrodes were used exactly, with the ear lobe as reference point. The recording were subjected to determine the mean voltage. The results were as follows; 1. In the clinical rest position, the muscle activities of bruxism and TMJ dysfunction patients were higher than those of normal at the before treatment, but that were lower or similar to those of normal at the TENS after and after bite plane wearing. 2. In the clench I.C.P., the muscle activities of TMJ dysfunction patients were decreased as the order of the before treatment, after TENS, after occlusal bite plane wearing, but those of bruxism were irregular. 3. In the clench right and the clench left, the muscle activities of the middle of masseter muscle of the non-working side of bruxism were higher than those of the working side at the before treatment and after TENS, but the muscle activities of after occlusal bite plane wearing were similar to those of the normal. 4. In the clench right and the clench left, the muscle activities of the middle of masseter muscle and anterior temporal muscle of the working side of TMJ dysfunction patients were higher than those of non-working side as like the normal at the before treatment, after TENS, and after occlusal bite plane wearing.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.648-658
• /
• 1998

본 논문에서는 PCB (printed circuit board) 접지면에 셜치된 캡(gap)이 불요전자파 방사에 미치는 영향을 정 량적으로 해석하였다. 본 연구의 해석법으로 복잡한 구조체의 전자기적 특성을 해석하는데 주파수영역 전자파 수치해석 방법들과 비교하여 여러 가지 장점올 가지는 시간영역 해석법인 FDTD(finite difference time dom main) 방법올 사용하였다. 해석 구조체는 일반적으로 생산되는 PCB와 유사한 크기를 선정하였으며 소자충은 전압원과 마이크로스트립만이 폰재하는 단순화된 구조이다. PCB 접지변에 설치된 캡에 의해 생기는 인덕턴스 의 크기와 입출력 케이블올 통한 불요전자파 방사량을 FCC 및 CISPR 규정치와 함께 제시하였으며 갱의 크기 에 따라 방사되는 불요전자파의 세기가 크게 변화되는 것을 관찰할 수 있다. 본 논문의 해석결과는 실제 PCB 셜 계에 있어서 잘봇된 캡의 설치로 인한 불요전자파 방사를 막는데 유용하게 사용될 수 있으리라 생각된다.

• 한국정보전자통신기술학회논문지
• /
• 제6권3호
• /
• pp.162-167
• /
• 2013

원형 구조를 갖는 평면 모노폴 UWB 안테나에서 접지면의 구조와 크기에 따른 입력 반사계수 특성의 변화를 연구하고, UWB 안테나가 장착되는 응용 기기에 따른 최적 접지면 구조와 크기를 제시하였다. 기준이 되는 원형 모노폴 안테나를 UWB 주파수 대역에서 동작하도록 반경 R 을 설계하였으며, 이 원형 모노폴을 수평면 접지 구조의 중심점에 올리고 시뮬레이션과 측정을 수행하여 양호한 결과를 얻었다. 연구 결과, 원형 모노폴의 반경이 작을 때 접지면의 적정 크기와 모노폴의 반경이 클 때 접지면의 최소 크기를 규정할 수 있었다.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1662-1667
• /
• 2012

This paper describes the design of size-reduced ring hybrid couplers (RHC) using a common defected ground structure (CDGS). The proposed RHC consists of double-sided microstrip line and the CDGS patterns which are placed in the common ground plane of the double-sided microstrip line. The effects of DGS as a periodic structure are imposed on both microstrip lines, so the advantages of the existing DGS are doubled. The normal RHC is designed first and folded by the half reference plane with the CDGS realized on the common ground plane. So another trial for size-reduction is performed by folding the RHC and inserting CDGS besides to the conventional DGS. In order to show a design example, a 2GHz RHC is designed and miniaturized using CDGS. The size of the miniaturized RHS is around 50% of the normal one, while the performances are well preserved even after the size-reduction.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.25-32
• /
• 2006

Mock-up model can be applied to measure accurate performance data but difficult to apply the variables in experiment. There can be a slight experiment errors in Scale model, but various parameters can be applied for a objective experiment. This paper aims to compare the daylighting performance in 1, 1/5, 1/10 scale model of offices and analyze the experiment errors to certificate the influence of model experiment. To analyse daylighting performance, a comparison of a Mock-up model, sized $12.0m(w){\times}7.2m(l){\times}3.7m(h)$, designed for experimentation of daylighting systems and its 1:5, 1:10 scale model. It has an identical configuration of reference room and the test room. For the test room, the lightshelf system was designed as Micro-4 reflective material. To assess work plane illuminance and light factor, photometric sensors of each room were installed at work-plane(6 points) and exterior horizontal illuminance (1 point). And luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio and luminance are discussed.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.194-203
• /
• 2017

The center of percussion(COP) is the point of an extended massive object attached to a pivot where a perpendicular impact will produce no reactive shock at the pivot. COP is an important concept in the field of vibration and dynamics. In vibration, COP causes reduction of vibration and in dynamics, it brings about maximum speed of an object. Many studies about COP are still in progress. However most of the researches have typically focused on the method of mathematical and numerical anlalysis. In this paper, impact analysis was proved by the mechanical energy method using EDISON co-rotational plane beam transient analysis program. The result expressed in acceleration was the relative magnitude of the impulse, which was the indicator of COP. Then, these results were compared with the reference thesis results for exact consequences. Additionally, parametric study of COP was conducted.

• 디지털콘텐츠학회 논문지
• /
• 제7권1호
• /
• pp.9-14
• /
• 2006

본 논문에서는 보안 시스템에서 사람 인식을 위한 중요한 단서 중의 하나인 사람의 키를 측정하는 알고리즘으로, 이미지 시퀀스에서 사람의 영역을 추출하고 기하학적 정보를 이용해 추출된 사람의 키를 측정하고자 한다. 이를 위해 단일 이동 물체 사람을 대상으로 하여 시퀀스 이미지에서 사람의 움직임 정보를 추출하고, 추출된 영역에서 수직히스토그램 투영을 하여 사람의 중심선을 찾아 머리와 발의 좌표점을 추출한다. 추출된 좌표점들은 소실점과 소실선의 기하학적 해석과 미리 입력한 다른 물체의 기준 높이를 가지고 실세계에서의 사람의 키를 측정하게 된다.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.177-189
• /
• 2015

The output of the controller is said to exceed the input limits of the plant being controlled when a control system operates in a non-linear region. This process is called the windup phenomenon. The windup phenomenon is not preferable in the control system because it leads to performance degradation, such as overshoot and system instability. Many anti-windup strategies involve switching, where the integral component differently operates between the linear and the non-linear states. The range of state for the non-overshoot performance is better illustrated by the boundary integral error plane than the proportional-integral (PI) plane in windup inspection. This study proposes a PI controller with a separate closed-loop integral controller and reference value set with respect to the input command and external torque. The PI controller is compared with existing conventional proportional integral, conditional integration, tracking back calculation, and integral state prediction schemes by using ScicosLab simulations. The controller is also experimentally verified on a direct current motor under no-load and loading conditions. The proposed controller shows a promising potential with its ability to eliminate overshoot with short settling time using the decoupling mode in both conditions.