• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.44-49
• /
• 2008

We have proposed a clock recovery circuit for 13.56MHz RFID Tags using 100%, ASK RF input signal. The proposed clock recovery circuit generates clock pulses without reference clock by adapting register controlled DLL. The proposed circuit have designed by using a TSMC 0.18um 1P6M CMOS technology. The simulated results show that the phase locking time of the proposed circuit is about 6.4 usec and power consumption is about 43uW at supply voltage of 3.3V.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.318-321
• /
• 2017

This commentary presents the regulatory backgrounds and development of the national proficiency testing (PT) scheme on asbestos analysis in the Republic of Korea. Since 2009, under the amended Occupational Safety and Health Act, the survey of asbestos in buildings and clearance test of asbestos removal works have been mandated to be carried out by the laboratories designated by the Ministry of Employment and Labor (MOEL) in the Republic of Korea. To assess the performance of asbestos laboratories, a PT scheme on asbestos analysis was launched by the Korea Occupational Safety and Health Agency (KOSHA) on behalf of the MOEL in 2007. Participating laboratories are evaluated once a year for fiber counting and bulk asbestos analysis by phase contrast microscopy and polarized light microscopy, respectively. Currently, the number of laboratory enrollments is > 200, and the percentage of passed laboratories is > 90. The current status and several significant changes in operation, sample preparations, and statistics of assigning the reference values of the KOSHA PT scheme on asbestos analysis are presented. Critical retrospect based on the experiences of operating the KOSHA PT scheme suggests considerations for developing a new national PT scheme for asbestos analysis.

• Journal of Environmental Health Sciences
• /
• v.41 no.5
• /
• pp.305-313
• /
• 2015

Objectives: The objective of this study is to identify toxicants causing acute toxicity in effluents from the aluminum rolling industry that violate the discharge limits in Korea. Methods: Whole effluent toxicity tests (WET) were conducted on effluent discharged from the aluminum rolling industry following the US EPA WET test methods. We collected effluent samples three times and evaluated acute toxicity by using Daphnia magna. We employed toxicity identification evaluation (TIE) procedures to identify toxicants causing toxicity in the effluent. Results: No specific chemical groups were identified in the seven different manipulations applied to the of wastewater effluent samples showing 1.3 toxic units (TU) according to the TIE phase I procedures. Water quality parameters for water hardness, electric conductivity and heavy metals (Mn) were 4,322 mg/l as $CaCO_3$, 11.39 mS/cm, and $5,551{\mu}g/l$, respectively. Considering water hardness and reference toxicity, high concentrations of Mn can be disqualified from the causative toxicants. Consequently, high ionic concentrations of $Na^+$(1,648 mg/l), $Ca^{2+}$(1,048 mg/l), $Mg^{2+}$(1,428 mg/l) and $SO_4{^{2-}}$(7,472 mg/l) were identified to be causative toxicants. Water hardness and electric conductivity exceed the $EC_{50}$ value obtained by biological toxicity tests using Daphnia magna. Conclusion: According to TIE procedures, high salt concentration is determined to be a major toxicant in the effluent of agro-industrial wastewater treatment plants receiving wastewater from the aluminum rolling industry.

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.99-107
• /
• 2002

Impedance Spectroscopy (IS) has been used to study microstructure and hydration mechanism of cement pastes. In this work, the early hydration behaviour of portland cement paste with different blame values and contents of blast-furnace slag was investigated by IS. As slag was added to portland cement, the values of $R_{t(s+1)}$ (the solid-liquid phase resistance) and $R_{t(int)}$ were decreased in the early hydration period. It showed that hydration of cement paste containing slag was slower than it of the reference cement paste. As the content of slag was increased, the values of $R_{t(s+1)}$ was decreased. Furthermore, the diameter of semicircle, $R_{t(int)}$ observed at 72 hours was decreased with the increment of slag content. However, the values of $R_{t(s+1)}$ and $R_{t(int)}$ were increased with blame value of slag from the early hydration period.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.83-91
• /
• 2007

An experimental verification of multipactor(MP) discharge for S-band diplexer as a sample DUT for space application by an in-house MP test facility is proposed. The designed diplexer having two BPFs for Rx and Tx is applied to a design of five pole inter-digital cavity type band pass filter with chebyshev response, it has 2.7 % bandwidth centered at 2.232 and 2.055 GHz for Rx, Tx, respectively. To avoid the MP discharge, the accurate design and analysis methods based on 3D EM field analysis are considered. The proposed in-house MP test facility consists of a phase detecting system using a doubly balanced mixer as a simple, low cost and real time MP test method compared with results of previously well-known MP detection systems as cross reference methods. The calculated MP threshold RF input power is 43.13 dBm. The measured one is 43 dBm and 44 dBm for CW, pulsed mode test, respectively.

• Journal of the Korean Society of Costume
• /
• v.56 no.1 s.100
• /
• pp.81-96
• /
• 2006

Fashion is very superficial. However, it is expressed through the culture that is a cause of internal change and therefore its contents are defined by the cultural features. In this study, to study the aesthetic properties of the French fashion, the internal fashion contents are defined according to the cultural characteristics of France and based on the definition, the external features are investigated. The cultural characteristic was analyzed based on the reference literatures on the French culture. Based on the cultural characteristics of France, the aesthetical properties of the contemporary French fashion can be analyzed as follows: ${\cdot}$Dualism is the internal contents of the French culture with multiple sources, and it implies that opposing values such as female and male, traditionalism and modernism, simplicity and decoration are coexisting. Simplicity is pursued but decorative elements are in harmony and new phase of time is reflected while certain style has lasted for a long period of time to become a tradition. Furthermore, a rational trend combining masculinity and femininity, simultaneously exist with a trend that emphasizes feminine image. ${\cdot}$Multiculturism is a mysterious feature that has adapted the oriental or other cultural factors into the forms, patterns, colors and material of costumes. It has also been reconstructed with the French and the modern tastes. ${\cdot}$Avant-gardism is pursuing a novel aesthetic value against the former value system. It recognizes the human body as an object of figurative arts therefore emphasizes the body with geometric shapes to deny the fixed-idea, or engraft new materials and technologies to express the futuristic aspects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.539-546
• /
• 2013

Surge phenomenon can be occurred in a compressor when compressor performance of turbofan engine for an aircraft is changed considerably in a short time on the cases like take-off phase and changing of RPM from idle to maximum, because performance of aircraft engine is changed suddenly. This study is aimed to avoid surge in a compressor. Dynamic simulation in a compressor is modeled by simulink in specific condition. Fuel flow is control input, rpm and air mass flow are expressed in terms of transfer function. Surge margin is obtained by using compressor performance map from NPSS. VIGV(Variable Inlet Guide Vane) is controlled by PD controller with difference between surge margin and reference. Finally this paper verifies IGV can prevent surge phenomenon in a compressor.

• Journal of Fashion Business
• /
• v.7 no.1
• /
• pp.152-159
• /
• 2003

The considerations on the costumes of the past, which have been conducted to the present for the purpose of creating a new design, are not just a simple imitation, but playing a role as a re-creation of fashion. A corset, one of the underwear items, has an important role to exaggerate, emphasize, or modify the beauty of a human body. It also contributes to form a beautiful silhouette of the outerwear. Specifically, the role of a corset today is more than a physical modification: making an underwear into an outerwear; using detailed decorations or materials of an underwear in the part of other garments. In doing these, decorative functions of costumes have been more and more emphasized. Therefore, a study on the composition or design of a corset would be an important study on the garment item that reflects fashions required by this age. The significance of the study is in its potential to provide reference materials needed in creating new underwear designs or the designs that can be made into outerwear products, by trying and producing a corset of the past. To make the corset, the definition of underwear and the characteristics of a corset were explored based on the review of the materials in the foreign museums, relevant photographs, and literature. The corset was made after understanding its minute details and examining its patterns. Pattern drawing was carried out using a Pattern CAD. As an intial phase of reproducing the corsets in the 17th, 18th, and 19th centuries, the scope of the present study was limited to the late Renaissance age, when corsets began to appear.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.6
• /
• pp.1427-1432
• /
• 2003

This study was carried out to investigate the antimicrobial and anticancer effects of Galla Rhois (GR) on pathogens isolated from oral and KB human oral epidermoid carcinoma cells. Their antimicrobial activities were tested against Streptococcus mutans (S. mutans), Staphylococcus aureus (S. aureus), Enterobacter aerogenes (E. aerogenes), Escherichia coli (E. coil) and Candida albicans (C. albicans). GR powder has the antimicrobial activity against C. albicans, S. mutans and S. aureus. The extracts of water and ethanol have the antimicrobial activity against S. sureus and C. albicans. The water extract showed inhibitory activity against the growth and pH of above mentioned reference microorganisms. The water extract of GR declined cell viability in a dose dependent manner. DNA flow cytometric analysis showed that population of sub-G/sub 0//G₁, phase of cell cycle was increased by GR extract treatment in a dose dependent manner. Western blot analysis revealed that Caspase-3 was reduced by GR extract treatment. These result suggested that GR has the effect of antimicrobial on pathogens isolated from oral, and also, has anticancer effect that associated with the induction of apoptosis in a dose dependent manner in KB human oral epidermoid carcinoma cells. It may be GR-induced apoptosis was mediated via activation of Caspase-3.

• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.819-835
• /
• 2016

In this paper, the activities carried out within the EU funded Clean Sky Joint Technology Initiative (JTI GRA) Project and aimed at developing a morphing flap, are illustrated. The reference device is a regional aircraft single slotted flap, enhanced with deforming capabilities to obtain improved hyper-lift performance. The design started with the identification of the internal architecture, intended to allow camber variations. A concentrated-hinge architecture was selected, for its ability to fit different curvatures and for the possibility of easily realizing an "armadillo-like" configuration, then avoiding the use of a complicate deformable skin. The flap layout is made of segmented ribs, elastically hinged each other and span-wise connected by conventional spars. Relative rotations of the rib elements are forced by SMA structural actuators, i.e., cooperating in the external loads absorption. Super-elastic SMA are used to make up recovery elastic elements, necessary to regain the original shape after activation. These further elements in turn contribute to the overall flap rigidity. After assessing the hinge number and the size of the SMA active and passive elements, the advanced design phase was dealt with. It was aimed at solving manufacturing issues and producing the executive drawings. The realized demonstrator was finally tested in lab conditions to prove its functionality in terms of whether target shape actuation or attained shape preservation under loads. On the basis of the numerical results and the experimental outcomes, precious hints were obtained for further developments of the concept.