• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.10
• /
• pp.513-519
• /
• 2001

This paper proposed a random sigma-delta modulator(RSDM), which is constructed by a 1st order sigma-delta modulator(SDM) and a simple structured random binary generator(RBG). The 1st order SDM produces a switching pulse waveform which has the same low-frequency component as the reference input, while the RBG spreads the distribution of the number of sampling per switching cycle, and thus disperses the spectrum spikes in the output. The relationship between the harmonic spectra and the number of sampling per switching cycle is studied through computer simulations, and the frequency spectra of the RSDM are confirmed in an experimental setup.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.809-810
• /
• 2006

An H.264 algorithm is commonly used for video compression applications. This algorithm requires a large number of data computations, for example, the sum of absolute difference (SAD) operation. We analyzed H.264 reference encoding workloads. The H.264 encoding program has 8.78% SAD operation. The SAD operation is to sum up 16 difference-values in H.264 $4{\times}4$ sub-blocks. In order to accelerate SAD operations, we implemented an application specific instruction-set processor (ASIP) that can execute SAD and data transfer instructions. The proposed coprocessor has an absolute value generator and a carry save adder (CSA) unit to sum up 8 difference-values per one clock cycle. We completed SAD operation in 2 clock cycles. Experimental results show that the performance is improved by 34% of total execution time.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.375-380
• /
• 2017

A differential current-to-time interval converter is presented for current mode sensors. It consists of a ramp voltage generator, a current mode sensor, a reference current source, two current-tunable Schmitt triggers, a one-shot multivibrator, and two logic gates. The design principle is to apply a ramp voltage to each input of the two current-tunable Schmitt triggers whose threshold voltages are proportional to the drain current values of the current mode sensors. A proposed circuit converts a current change in the ISFET biosensor into its equivalent pulse width change. A prototype circuit built using TSMC 0.18 nm CMOS process exhibit a conversion sensitivity amounting to $726.9{\mu}s/pH$ over pH variation range of 2-12 and a linearity error less than ${\pm}0.05%$.

• Journal of the Korea Society for Simulation
• /
• v.6 no.1
• /
• pp.85-96
• /
• 1997

Designing and constructing a proper simulator for real power plants requires extensive research in human engineering and computer science and integration of different fields of technologies such as system analysis, operational knowledge for nuclear plant, etc. A full scope replica type simulator for nuclear power plant is developed. The simulator has the same feature and operational functions as one in the main control room (MCR) of a reference power plant. The simulator provides the necessary training to recover or reduce damages from accidents that usually are unpredictable. This paper describes the configurations and characteristics for the simulator that is developed for Younggwang Nuclear Power Plant #3,4 which is the basic model of the Korean Nuclear Power Plant. The paper also describes technical aspects of Auto Code Generator that is used for developing the simulator. The successful development of the simulator will contribute to improve safety in operation of nuclear power plants.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2006-2011
• /
• 2010

The superheater in the thermal power plant makes the wet steam into the dry steam with high temperature and high pressure by using the boiler heat. The dry steam pressure rotates the turbine-generator system. The efficiency and life time of the boiler heavily depends on the steam temperature regulation. The steam temperature can be deviated from the reference by the MW demand of the power plant. It is therefore required that the PI(proportional-integral) controller should be robust against the disturbance such as the MW demand. In this paper, the PI controller with the integral state predictor is proposed and applied to regulate the steam temperature of the superheater, and it is compared with the conventional PI controller operated in the thermal power plant in view of control performance.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.7
• /
• pp.437-442
• /
• 2005

In order to realize the speed control of an induction motor, the information of the rotor speed is needed. So the speed sensor as an encoder or a pulse generator is used to obtain it. But the use of speed sensor occur the some problems in the control system of an induction motor. To solve the problems, the appropriate speed estimation algorithm is used instead of the speed sensor. Also there is the limitation to improve the speed control performance of an induction motor using the existing speed estimation algorithm. Therefore, in this paper, intelligent speed estimator using Fuzzy-Neural systems as adaptive laws in Model Reference Adaptive System is proposed so as to improve the existing estimation algorithm and ,using the rotor speed estimated by the Proposed estimator, the speed control of an induction motor without speed sensor is performed. The computer simulation and the experiment is executed to prove the performance of the speed control system usinu the proposed speed estimator.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2016

Reverse matrix converters, which can step up voltages, are suitable for applications with source voltages that are lower than load voltages, such as generator systems. Reverse matrix converter topologies are advantageous because they do not require additional components to conventional matrix converters. In this paper, a detection method and a post-fault modulation strategy to operate a converter as close as possible to its desired normal operation under the open-switch fault condition in the rectifier stage are proposed. An open-switch fault in the rectifier stage of a reverse matrix converter causes current distortions and voltage ripples in the system. Therefore, fault-tolerant control for open-switch faults is required to improve the reliability of a system. The proposed strategy determines the appropriate switching stages from among the remaining healthy switches of the converter. This is done based on reference currents or voltages. The performance of the proposed strategy is experimentally verified.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.353-355
• /
• 2007

A simple technique for PFC circuit is presented using UC3854. This technique is about current peak controlling by a reference current generator. Decreased peak currents of the boost pre-regulator reduce circuit current stress and so rated currents of circuit elements are minimized. Simulation and experimental results will verify the viability of the new scheme.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.281-282
• /
• 2014

본 논문은 FPGA 기반의 DSC-PLL(Delayed Signal Cancellation - Phase Locked Loop)을 설계하고, 왜곡된 3상전압 조건에서 위상추종결과를 비교실험 하였다. FPGA 구현 알고리즘은 Matlab/Simulink와 연동된 System Generator를 이용하여 DSC-PLL 모델을 설계하고, Verilog HDL 코드로 변환 하였다. 불평형 및 고조파를 포함한 왜곡된 3상 전압 조건에서 FPGA에 구현된 DSC-PLL과 SRF-PLL (Synchronous Reference Frame - Phase Locked Loop)의 d-q축 고조파 감쇠특성 및 위상추종능력을 실험을 통해 비교하였다. DSC-PLL은 약 5.44ms 이내에 d-q축 고조파 성분을 제거함으로써 정상분 기본파 전압의 위상을 빠르게 추종하는 것을 검증하였다.

• KIISE Transactions on Computing Practices
• /
• v.24 no.2
• /
• pp.88-92
• /
• 2018

'UFO2MF' and 'Korean MetaFont Generator' have been developed to convert UFO codes to the corresponding Metafont codes by using outline editing methods. However, 'UFO2MF' cannot express smooth curves because it use only reference points without using control points. And 'Korean MetaFont Generator' can easily design the curve of characters, and supports Hangul characters, but this system does not support Roman characters. In this paper, we propose a UFO2xMF system, which can convert both Korean and Roman characters from outline text information into Metafont codes. UFO2xMF can apply attribute values which can change the shape of letters during the conversion of Metafont code. It is also a highly compatible system that can convert the characters of various languages not only Korean characters but also Roman and other characters into Metafont codes by applying letters with baseline and centerline of gravity.