• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.123-128
• /
• 2001

The creep constants which are used to the reference stress equations of creep damage were obtained to type 316LN stainless steel, and their determining methods were described in detail. Typical Kachanov and Rabotnov(K-R) creep damage model was modified into the damage equations with reference stress concepts, and the modified equations were applied practically to type 316LN stainless steel. In order to determine the reference stress value, a series of high-temperature tensile tests and creep tests were accomplished at $550^{\circ}C$ and $600^{\circ}C$. By using the experimental creep data, the creep constants used in reference stress equations could be obtained to type 316LN stainless steel, and a creep curve on rupture strain was predicted. The reference stress concept on creep damage can be utilized easily as a design tool to predict creep life because the process, which is quantified by the measurement of voids or micro cracks during creep, is omitted.

• Nutrition Research and Practice
• /
• 제16권sup1호
• /
• pp.11-20
• /
• 2022

Research articles were reviewed to validate the estimated energy requirements (EERs) equations developed by the Institute of Medicine of the National Academies (IOM). These equations are based on total energy expenditure (TEE) measured by the doubly labeled water (DLW) method. We subsequently aimed to provide the basis for the suitability to apply the IOM equations as EER equations for Koreans, and develop relevant equations for EER in the Dietary Reference Intake for Koreans (KDRI). Additionally, besides the EER(IOM) equations, other equations were examined for EER estimation. Research papers demonstrating the validation of the EER(IOM) equations based on TEE(DLW) were searched through PubMed (up to September 2019). Of the 637 potentially relevant articles identified, duplicates and unsuitable titles and abstracts were excluded. Furthermore, papers with irrelevant subject and inappropriate study design were also excluded. Finally, 11 papers were included in the review. Among the reviewed papers, 8 papers validated the application of the EER(IOM) equations for EER based on TEE(DLW). These included 3 studies for children (USA 1, Korea 2), 1 for adolescents (Portugal), 2 for adults (Korean), and 2 for the elderly (Korea, USA). EER(IOM) equations were found to be generally acceptable for determining EER by using the DLW method, except for Korean boys at 9-11 yrs (overestimated) and female athletes at 19-24 yrs (underestimated). Additionally, 5 papers include the validation of other EER equations, beside EER(IOM) for EER based on TEE(DLW). In Japanese dietary reference intake and recommended dietary allowance, EER equations are acceptable for determining EER based on TEE(DLW). The EER(IOM) equations is generally acceptable for determining EER using the DLW method in Koreans as well as several populations, although certain defined groups were found to be unfit for the estimation. Additionally, the concept of healthy body mass index of Koreans and physical activity levels need to be considered, thereby providing the basis for developing relevant equations of EER in KDRI.

• 한국인터넷방송통신학회논문지
• /
• 제17권6호
• /
• pp.217-222
• /
• 2017

지구 중력장 내에 위치한 물체는 연직 아래 방향의 힘을 받고 있다. 중력장 내에서 물체의 운동을 기술하기 위하여 운동상태 방정식을 이용한다. 자유 낙하하는 물체를 해석할 때 기준 방향은 연직 하방을 +y으로, 연직위로 던져 올린 물체를 해석할 때 기준방향은 연직상방을 +y으로, 연직 아래로 던져 내린 물체를 해석할 때, 기준 방향은 연직 하방을 +y으로 선택하여 해석함이 일반적이다. 이 논문에서는 두 벡터의 스칼라 곱 (즉, 도트 곱)을 이용하여 연직 상방 또는 하방 두 경우를 방향으로 선택하여 구성한 벡터 운동 상태 방정식(vector kinematics equations)을 해석의 결과가 서로 일치함을 제시한다. 두 벡터의 스칼라 곱 (즉, 도트 곱)을 이용하여 물체의 상태 방정식를 해석한 예는 선행 연구에서 거의 찾아볼 수가 없다. 이 결과를 이용하면, 수평면의 방향 또는 빗각을 이루는 방향의 초속도로 던져 올리거나 던져 내린 물체의 운동 상태를 해석하기 위하여 연직 기준 방향을 상방 또는 하방으로 임의 선택할 수가 있다.

• 한국농공학회논문집
• /
• 제60권3호
• /
• pp.15-25
• /
• 2018

Estimating the reference evapotranspiration is an important factor to consider in irrigation system design and agricultural water use. However, there is a limitation in using the FAO Penman-Monteith (FAO P-M) equation, which requires various meteorological data. The purpose of this study is to compare three reference evapotranspiration (ETo) equations in the case of meteorological data missing for 11 study weather stations. Firstly, the FAO P-M equation is used for reference potential evapotranspiration estimation with the actual solar radiation data $R_n$ and the actual vapor pressure $e_a$. Then, in the case of $R_n$, and $e_a$ are missed, the reference evapotranspirations applying FAO P-M, Priestley-Taylor (P-T), Hargreaves (HG) equation were calculated using other meteorological factors. Secondly, MAE, RMSE, $R^2$ were calculated to compare ETo relationship from the ETo equations. From the results, ETo with Hargreaves equation in coastal areas and the Priestley-Taylor equation in the inland areas showed relatively high correlation with FAO P-M when $e_a$ data is missed. In the case of $R_n$ data is missed or two weather data, $e_a$, and $R_n$ data are all missed, $R^2$ value in Priestley-Taylor equation was highest in coastal areas, and $R^2$ values in Hargreaves equation were the high values for 7 inland areas. The results of sensitivity analysis showed that net radiation was the most sensitive for P-T and HG equation, and for FAO P-M, the most sensitive factor was net radiation and relative humidity, air temperature and wind speed were follows. Therefore, in considering of the accessibility to the coast, the types of the missing wether data, and the correlation and the magnitude of error, the reference evapotranspiration equations would be selected in sense of different conditions.

• 대한토목학회논문집
• /
• 제30권2B호
• /
• pp.219-231
• /
• 2010

Reference Evapotranspiration Calculator Software (REF-ET)는 ASCE 및 FAO 기준증발산량을 포함한 총 17개의 FAO Penman-Monteith (PM) 방정식의 연산을 동시에 수행할 수 있는 프로그램으로서, 본 연구에서는 REF-ET에 대한 상세한 소개와 함께 기상관측소의 관측자료를 이용하여 REF-ET의 효용성을 논하였다. REF-ET는 각종 PM 방정식들에 대한 시일 월 단위 모의와 지역적 특성의 반영 및 결측자료에 대한 보정 등이 가능하다. REF-ET를 이용하여 서울 기상관측소의 29년간 증발산량을 모의한 결과, 일복사량에 주로 좌우되는 FAO24-Rd 식과 1957-Makk 식의 상관계수가 각각 0.89와 0.88로 높게 나타났으며, 이는 소형증발접시를 이용한 기준증발산량 관측값이 공기 동력학적 증발량만을 주로 반영하기 때문인 것으로 사료된다. 또한 RMSE/bias 분석을 통해 기준증발산 방정식들에 의한 계산값이 증발접시로부터의 기준증발산량에 비해 다소 과대평가되는 현상을 나타내었으나, 이 경우에도 1957-Makk 식이 가장 정확한 것으로 나타났다. 일단위 시계열 분석시 1957-Makk 식은 여름철의 증발산량을 저평가하는 경향을 나타내었으나, 전체적으로 1.06 mm/day의 오차로 증발산량을 모의 가능하였다. 차후 기상관측자료의 정확도를 높이는 연구들과 REF-ET를 병행한다면, 해당 지역 및 기간에 대한 증발산량 모의 및 관련 특성인자를 파악하는 연구에 활용도가 높을 것으로 기대된다.

• 한국항공우주학회지
• /
• 제35권12호
• /
• pp.1075-1081
• /
• 2007

온도예조건화 방법을 Navier-Stokes 방정식에 적용하여 보았다. 그리고 Navier-Stokes 방정식에 적절한 기준마하수를 결정하기 위해 확산마하수 개념을 도입하였다. 다양한 레이놀즈수에 대한 실린더 주위의 2차원 유동을 계산하였다. 온도예조건화를 Navier-Stokes 방정식에 적용한 결과, 수렴특성이 주목할 만큼 개선되는 것을 보였다. 그리고 확산마하수로 수정한 기준마하수는 국부적으로 마하수가 낮은 영역의 수렴성 문제를 상당히 완화시키는 것을 확인하였다.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.268-274
• /
• 2008

This paper presents a proposed position controller for a vector controlled induction motor. The position controller design depends on the rotational motion equations and a classical speed controller (CSC) performance. The CSC is designed to have the ability to track variable reference inputs and to provide a predefined system performance. Standard position controller in industry is presented to analyze its performance and its drawbacks. Then the proposed position controller is designed, based on the well defined rotational motion equations. The proposed position controller and the CSC are applied to control the position and speed of the vector controlled induction motor with different ratings. Simulation results at different operating conditions are presented to evaluate the proposed controllers' performance. The results show that the CSC can drive the motor with a predefined speed performance and can track a variable reference speed with an approximately zero steady state error. The results also show that the proposed position controller has the ability to effect high-precision positioning in a limited time and to track a variable reference position with a zero steady state error.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.926-930
• /
• 1993

An efficient method of formulating the equations of motion of multibody systems is presented. The equations of motion for each body are formulated by using Newton-Eulerian approach in their generic form. And then a transformation matrix which relates the global coordinates and relative coordinates is introduced to rewrite the equations of motion in terms of relative coordinates. When appropriate set of kinematic constraints equations in terms of relative coordinates is provided, the resulting differential and algebraic equations are obtained in a suitable form for computer implementation. The system geometry or topology is effectively described by using the path matrix and reference body operator.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.239-246
• /
• 2003

This paper proposes engineering estimation equations of elastic-plastic J and COD fur axial through-wall cracked pipes under internal pressure. Based on detailed 3-D FE results based on deformation plasticity, the plastic influence functions for fully plastic J and COD solutions are tabulated as a function of the mean radius-to-thickness ratio, the normalized crack length. and the strain hardening. Based on these results, the GE/EPRI-type J and COD estimation equations are proposed and validated against the 3-D FE results based on deformation plasticity. For more general application to general stress-strain laws or to complex loading, the developed GE/EPRI-type solutions are re-formulated based on the reference stress concept. Such a reformulation provides simpler equations for J and COD, which are then further extended to combined internal pressure and bending. The proposed reference stress based J and COD estimation equations are compared with elastic-plastic 3-D FE results using actual stress-strain data for Type 316 stainless steels. The FE results for both internal pressure cases and combined internal pressure and bending cases compare very well with the proposed J and COD estimations.

• International Journal of Fluid Machinery and Systems
• /
• 제8권1호
• /
• pp.55-62
• /
• 2015

This study aims to present a hydraulic transitory study as MOC applications for solving the Saint-Venant equations in two case studies: 1) in a penstock of a small hydropower system as a simple pipeline in the case of valve-closure in the downstream boundary with a reservoir in the upstream boundary; and 2) for discharge propagation into a channel by velocity and depth of the flow channel along space evaluation. The proposed methodology by Chaudry [5] concerning the development of hydrodynamic models was used. The obtained results for first and second case study has been confirmed that MOC numerical approach is useful for several engineering purposes, including cases of hydraulic transients and discharge propagation in hydraulic systems.