• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.143-146
• /
• 2011

A 50-MS/s 10-bit pipelined ADC with 1.2Vpp differential input range is proposed in this paper. The designed pipelined ADC consists of eight stage of 1.5bit/stage, one stage of 2bit/stage, digital error correction block, bias & reference driver, and clock generator. 1.5bit/stage is consists of sub-ADC, DAC and gain stage, Specially, a sample-and hold amplifier (SHA) is removed in the designed pipelined ADC to reduce the hardware and power consumption. Also, the proposed bootstrapped switch improves the Linearity of the input analog switch and the dynamic performance of the total ADC. The reference voltage was driven by using the on-chip reference driver without external reference. The proposed pipelined ADC was designed by using a 0.18um 1-poly 5-metal CMOS process with 1.8V supply. The total area including the power decoupling capacitor and power consumption are $0.95mm^2$ and 60mW, respectively. Also, the simulation result shows the ENOB of 9.3-bit at the Nyquist sampling rate.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.272-279
• /
• 2008

Shot change detection is an important technique for effective management of video data, so detection scheme requires adaptive detection techniques to be used actually in various video. In this paper, we propose an adaptive shot change detection algorithm using the mean of feature value on variable reference blocks. Our algorithm determines shot change detection by defining adaptive threshold values with the feature value extracted from video frames and comparing the feature value and the threshold value. We obtained better detection ratio than the conventional methods maximally by 15% in the experiment with the same test sequence. We also had good detection ratio for other several methods of feature extraction and could see realtime operation of shot change detection in the hardware platform with low performance was possible by implementing it in TVUS model of HOMECAST company. Thus, our algerian in the paper can be useful in PMP(portable multimedia player) or other portable players.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.34-41
• /
• 1998

An integrated circuit for magnetic stripe storage system is implemented. All the analog and digital circuits are integrated in one chip. The analog block contains preamplifier, peak detecter, comparator and reference generater. And digital block includes reference window signal generater, up/down counter for F/2F signal measurement, bit-error detection logic, and control logic. Both the encoding and decoding functions for F/2F signal processing are provided. An AGC(automatic gain control) circuit which was included in conventional circuits is eliminated due to optimized circuit design. Misreading prevention circuits are also proposed by fixing up new reference bit when broken bits are detected. The prototype chip is implemented using $0.8{\mu}m$ N-well CMOS technology and operates from 3.3 V to 7.5 V of supply voltage. It occupies a die area of $3.04mm^2(1.6mm{\times}1.9mm)$ and dissipates 8 mW with a 5 V supply voltage.

• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.676-683
• /
• 2012

Motion estimation in video coding greatly affects implementation complexity. In this paper, a reducing method of the complexity in motion estimation is proposed by using both the depth and color cameras. We obtain object information with video sequence from distance information calculated by depth camera, then perform labeling for grouping pixels within similar distances as the same object. Three search regions (background, inside-object, boundary) are determined adaptively for each of motion estimation blocks within current and reference pictures. If a current block is the inside-object region, then motion is searched within the inside-object region of reference picture. Also if a current block is the background region, then motion is searched within the background region of reference picture. From simulation results, we can see that the proposed method compared to the full search method remains the almost same as the motion estimated difference signal and significantly reduces the searching complexity.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.345-352
• /
• 2007

Two-dimensional (2D) MT surveys near the Century mine in Australia have been performed with very far remote reference in Esashi, Japan (RR_ESS) as well as Gregory Downs (RR_GREG), which are roughly 6,400 km and 80 km apart from the survey area, respectively. Good quality of MT data could be obtained by remote reference processing with RR_GREG, while the coherency of magnetic fields between field sites and RR_ESS was not sufficient to be used as remote data. Both 2D and 3D inversion of 2D profile data represented the general geological structure beneath the survey area. The main target of the survey, Termite Range Fault, appeared as a boundary between a conductive block to the north and a resistive block to the south in the reconstructed resistivity section, and is inclined slightly to the north-east direction.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.67-71
• /
• 2010

In this study, an algorithm for blind modulation detection in EDGE systems is presented. EDGE introduces an 8PSK modulation to provide high-speed data rates in addition to the existing GSM system. A transmitter may switch dynamically the modulation and coding schemes for transmission of data according to the channel quality. To decode the data correctly, the receiver has to detect using only training sequence which modulation is being used. Basically the property of one radio block composed of four bursts to detect effectively the modulation scheme even under severe conditions is used. More specifically, the reference value calculated for received burst is accumulated with previous reference value to minimize statistically the false detection probability in one radio block. Also each burst data having different modulation from the modulation of the fourth burst is set to zero to improve the decoding performance because the reference of the fourth burst has the highest reliability.

• Journal of Chest Surgery
• /
• v.54 no.3
• /
• pp.186-190
• /
• 2021

Background: Pre-lifting of the sternum marked a major turning point in pectus excavatum repair. The author developed the crane technique in 2002 and successfully applied it to more than 2,000 cases using sternal wire stitching. However, blind sternal suturing limited the use of the wire-stitch crane. We propose a novel screw for sternal lifting as a new tool for the crane technique. Methods: We developed a screw system strong enough to withstand the pressure needed for sternum lifting. The screw was designed to have a broader thread to hold the bony tissue securely. The screw's sustaining power was tested using the torsion, driving torque, and axial pull-out tests in a polyurethane block and ex-vivo porcine sternum. Results: The screws were easily driven into the sternum, and the head of the screw was connectable to the table-mounted retractor. In the torsion test, the 2° offset torsional yield was 4.53 N·m (reference value, 1 N·m). In the polyurethane block driving torque test, the maximum torque was 0.98 N·m (reference value, 0.70 N·m). The axial pull-out test was 446 N (reference value, 100 N). The maximum pull-out resistance in the ex-vivo porcine sternum model was 1,516 N. Conclusion: The screw crane was strong enough to sustain the chest wall weight to be lifted. Thus, the screws could effectively replace the sternal wire stitching in crane pre-lifting of the sternum. We expect that application of the screw-crane will be easy and that it will improve the safety and success rate of pectus repair surgery.

• The Korean Journal of Pain
• /
• v.23 no.1
• /
• pp.11-17
• /
• 2010

Background: The target of lumbar sympathetic ganglion block is the anterolateral surface of the L2, 3 and 4 vertebral bodies, where the lumbar sympathetic ganglion usually lies. In most cases, a block-needle is inserted approximately 5-8 cm lateral to spinous process on the skin and directed to the anterolateral surface of vertebral body obliquely. The purpose of this study is to determine the safe entry angle and entry point in Korean by using the abdominal CT scan images. Methods: The abdominal CT images of eighty five patients were recruited to this study. The minimal angle aimed at the lumbar sympathetic ganglion that can pass through the lateral aspect of body and maximal angle that avoids puncturing the kidney, ureter or retroperitoneal space were measured. The distance from midline to skin entry point was also measured. Results: There was no significant difference in entry angle among L2, 3, and 4 level. The entry angle was similar in the right and left side, and in males and females. The entry angle of old age group was significantly smaller than that of young age group. The calculated safe entry angle was $30.5{\pm}0.4^{\circ}$ and entry point was $7.7{\pm}0.2\;cm$ and $6.7{\pm}0.1\;cm$ lateral from midline in males and females respectively. Conclusions: These measurements can be used as a reference for lumbar sympathetic ganglion block and radiofrequency lesioning. Prior to performing the lumbar sympathetic ganglion block for cancer patients, the abdominal CT scan should be reviewed to prevent complications.

• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.406-413
• /
• 2001

Ordinary high-speed block matching algorithms have a disadvantage that they need to get MAD (Mean Absolute Distance) as many as the number of search points due to comparing the MAD between the current frame's search block and the reference frame's search block. To solve such disadvantage of high-speed block matching algorithm, the proposed high-speed DS algorithm employs a MMAD calculation method using a specific characteristic that neighboring pixels have almost same values. In this thesis, we can get rid of unnecessary MAD calculation between the search point block by the new calculation method which uses the previously calculated MAD as the current search point and by breaking from the established MAD calculation method which calculates the MAD of a new search point by each search stage. Comparing with the established high-speed block matching algorithm, this new calculation's estimated movement error was shown as similar, and th total calculation amount decreased by $2FN^2Ep$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.1
• /
• pp.26-37
• /
• 2000

The purpose of this study was to investigate the effect that three resin indexing materials had on the distortion of split cast in the procedures of solder indexing and block fabrication. The specimen had two cylinders and connecting bar Two cylinders were a reference cylinder and a test cylinder that were machined precisely and placed on metal base. The total of specimens were 30 and they were divided into 3 groups according to the resin indexing materials : Acrylic $solder^{(R)}$, G-C Pattern $resin^{(R)},\;Z-100^{(R)}$. The relative coordinates (X, Y, Z) of centroids of both cylinders were measured by using 3-D cool dinates measuring machine. The value of indexing distortion was obtained after application of indexing material, and the value of the block distortion was obtained after fabrication of soldering block, and the value of total distortion was a value sum of indexing distortion and block distortion. Intercentroidal linear distortion ${(\sqrt{X^{'2}+Y^{'2}+Z^{'2}}-{\sqrt{X^2+Y^2+Z^2)}$ and global distortion $(\sqrt{{(X^'-X)}^2+{(Y^'-Y)}^2+{(Z^'-Z)}^2}$ were calculated from data of coordinates of centroids at each measuring stages. The results of this study were as belows ; 1. The intercentroidal distance between the split casts was reduced by indexing distortion and increased by block distortion. 2. The indexing global distortion between the split casts was smaller than block global distortion. 3. The intercentroidal linear distortion and the global distortion were no significant difference between indexing materials.