• Geomechanics and Engineering
• /
• 제22권4호
• /
• pp.291-303
• /
• 2020

The deformation of the rock surrounding a tunnel manifests due to the stress redistribution within the surrounding rock. By observing the deformation of the surrounding rock, we can not only determine the stability of the surrounding rock and supporting structure but also predict the future state of the surrounding rock. In this paper, we used grey system theory to analyse the factors that affect the deformation of the rock surrounding a tunnel. The results show that the 5 main influencing factors are longitudinal wave velocity, tunnel burial depth, groundwater development, surrounding rock support type and construction management level. Furthermore, we used seismic prospecting data, preliminary survey data and excavated section monitoring data to establish a neural network learning model to predict the total amount of deformation of the surrounding rock during tunnel collapse. Subsequently, the probability of a change in deformation in each predicted section was obtained by using a Bayesian method for detecting change points. Finally, through an analysis of the distribution of the change probability and a comparison with the actual situation, we deduced the survey mark at which collapse would most likely occur. Surface collapse suddenly occurred when the tunnel was excavated to this predicted distance. This work further proved that the Bayesian method can accurately detect change points for risk evaluation, enhancing the accuracy of tunnel collapse forecasting. This research provides a reference and a guide for future research on the probability analysis of tunnel collapse.

• 대한토목학회논문집
• /
• 제32권2B호
• /
• pp.149-152
• /
• 2012

본 연구는 해상풍력발전기 기초 설계에 사용되는 IEC 61400-3, DNV-OS-J101, GL Wind, EUROCODE, AASHTO 및 국내 설계기준의 설계방법 및 안전율의 정도를 비교, 분석함으로써, 국내에서 해상풍력발전기 기초 설계시 필요한 제반사항을 제공하고자 한다. 해상풍력발전기 기초 설계에 관한 국내외 설계기준을 분석한 결과 설계법은 크게 설계접근법, 하중저항 설계법, 허용응력설계법을 적용하고 있으며, 각 설계법에 따른 안전율 정도를 분석한 결과 하중저항계수 설계법과 설계접근법은 거의 유사한 수준의 안전율을 확보하고 있는 반면, 허용응력설계법에서는 다소 보수적인 안전율을 적용하고 있어 해상풍력발전기 기초의 경제적 설계를 위한 국내 설계기준 개발이 필요할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.860-868
• /
• 2008

Seismic safety analysis of rockfill dams are consist of the stability analysis as an simplifed method and the dynamic analysis as an detailed method. When high risk dams such as Multi-purpose dams were often applied detailed method by dynamic analysis, dynamic properties of dam materials such as shear modulus are considered as most important factor. Dynamic material properties such as shear modulus had to be investigated by cyclic triaxial test et al. during design and construction stage but these were not conducted because of the condition of domestic seismic design technique. MASW and SASW methods had been applied as a non destructive method to investigate dynamic material properties of existing rockfill dam, has no problems in dam safety at present. These methods were usually performed under the assumptions that the subsurface can be described horizontally homogeneous and isotropic layers. Recent studies(Marwin, 1993, Kim, 2001) showed that surface waves generated through inclined structures have different characteristics from those through a horizontally homogeneous layered model. further Kim et al(2005) and Min and Kim(2006) showed that central core type rockfill dam overestimated the shear wave velocities as increasing the depth through the 3D numerical modelling dut to the effect of outer rockfill and geometrical reasons In this study the results of shear wave velocities of seven rockfill dams form comprehensive facility review, was carried out from 2003 to 2007, were collected and analysed to establish the shear wave velocity distribution characteristics in increasing confining stress in rockfill dams and surface wave velocity ranges in rockfill dam through MASW and the limitation in application are discussed to be utilized as an reference value for dynamic analysis.

• Geomechanics and Engineering
• /
• 제22권6호
• /
• pp.541-552
• /
• 2020

With the increasing tension of current coal resources and the increasing depth of coal mining, the gob-side entry retaining technology has become a preferred coal mining method in underground coal mines. Among them, the technology of the gob-side entry retaining with the high-water filling material can not only improve the recovery rate of coal resources, but also reduce the amount of roadway excavation. In this paper, based on the characteristics of the high-water filling material, the technological process of gob-side entry retaining with the high-water filling material is introduced. The early and late stress states of the filling body formed by the high-water filling materials are analyzed and studied. Taking the 8th floor No.3 working face of Xin'an coal mine as engineering background, the stress and displacement of surrounding rock of roadway with different filling body width are analyzed through the FLAC^3D numerical simulation software. As the filling body width increases, the supporting ability of the filling body increases and the deformation of the surrounding rock decreases. According to the theoretical calculation and numerical simulation of the filling body width, the filling body width is finally determined to be 3.5m. Through the field observation, the deformation of the surrounding rock of the roadway is within the reasonable range. It is concluded that the gob-side entry retaining with the high-water filling material can control the deformation of the surrounding rock, which provides a reference for gob-side entry retaining technology with similar geological conditions.

• 기본간호학회지
• /
• 제8권2호
• /
• pp.172-188
• /
• 2001

Purpose: The purpose of this research was to test the effectiveness of the nursing intervention, mutual goal setting, for patients who have had a mastectomy. Special reference was given to King's goal attainment theory and a theoretical framework for establishing an effective nursing strategy to enhance patient recovery is suggested. Method: This research employed a quasi-experimental design which consisted of pretest-posttest non-equivalent control and experimental groups. Data were collected from 37 patients who had a mastectomy and were hospitalized in the Department of Surgery of Y Medical Center from January 2001 to May 2001. The experimental group received the nursing intervention, mutual goal setting four times from the day before the operation to the fifth day after the operation while the control group received only routine nursing care. As postoperative recovery indicators, ROM of arm joints, arm circumference, pain, physical symptoms, oxygen saturation stress, anxiety and body image were measured. Result: The test results are as follows : 1) there were statistically significant differences between the experimental and control groups in extension and internal rotation of the shoulder Joint and flexion of the wrist joint. 2) there was no significant difference between the two groups in arm circumference. 3) there were no significant differences between the two groups in pain, physical symptoms, or oxygen saturation. 4) there were no significant differences between the two groups in stress, anxiety, or body Image. On the basis of research results, the following are recommended : 1) The effectiveness of nursing intervention in the acute recovery period as well as long term effects need to be investigated. 2) There is a need to develop an instrument to measure perception which facilitates goal attainment in the interactive setting between patients and nurses.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.190-197
• /
• 2002

In this thesis, ZnO varistors with various formulation, such as A∼E, were fabricated according to ceramic fabrication method. The microstructure, electrical properties, and surge characteristics of ZnO varistors were investigated according to ZnO varistors with various formulation. In the microstructure, A∼E\`s ZnO varistor ceramics sintered at 1130$\^{C}$ was consisted of ZnO grain(ZnO), spinel phase (Zn$\_$2.33/Sb$\_$0.67/O$\_$4/), Bi-rich phase(Bi$_2$O$_3$) and intergranuler phase, wholly. Lightning impulse residual voltage of A, B, C and E\`s ZnO varistors suited standard characteristics, below 12kV at current of 5kA. On the contrary, D\`s ZnO varistor exhibited high residual voltage as high reference voltage. In the accelerated aging test, leakage current and watt loss of B, C and D\`s ZnO varistors increases abruptly with stress time under the first a.c. stress(115$\^{C}$/3.213kV/300h). Consequently, C varistor exhibited a thermal run away. On the contrary, leakage current and watt loss of A and C\`s ZnO varistors which show low initial leakage current exhibited constant characteristics. After high current impulse test, A\`s ZnO varistor has broken the side of varistor but impulse current flowed. On the contrary, E\`s ZnO Varistor exhibited good discharge characteristics which the appearance of varistor was not wrong such as puncture, flashover, creaking and other significant damage. After long duration impulse current test, E\`s ZnO varistor exhibited good discharge characteristics which the appearance of varistor was not wrong such as puncture, flashover, creaking and other significant damage. After high current impulse test and long duration impulse current test, E\`s ZnO varistor exhibited very good characteristics which variation rate of residual voltage is 1.4% before and after test.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.48-74
• /
• 1995

Since heat curing acrylic resins undergo unavoidable dimensional changes following polymerization, adaptation can be altered. Until recently, although numerous studies on the dimensional changes of denture base were based on a microscopic technic that measures the relative displacement of a limited reference points on the denture base, but there have been few studies on the distortions of resins using holographic interferometry. Purpose of this study was to determine and compare the dimensional changes and fringe patterns of 4 heat curing acrylic resins, and observe the distortions of acrylic resin denture base by temperature change with the aid of the holographic interferometry. Holographic interferograms were taken on the resin specimens and acrylic resin denture base with the 10mW He-Ne laser and double exposure method. Comparison and analysis of fringe pattern on the recorded object surface was performed. The following results were obtained. 1. The dimensional changes for the high impact resin Lucitone 199 were statistically the greatest of all resins, and the rapid heat curing resin Premium super 20 were the least. 2. The most polymerization shrinkage of all materials occured in initial period of measurements, at this time the difference of polymerization shrinkage properties between resins was founded. 3. The stress distribution of specimens was seen by various type of fringe pattern which had directionality. 4. The polymerization shrinkage of resins was greatly influenced by temperature change. 5. The partial deformations of resin denture base were observed in 70 C and 90 C water.

• 한국추진공학회지
• /
• 제22권6호
• /
• pp.111-117
• /
• 2018

마이크로 추력기의 성능평가를 위해 MEMS 추력 측정 시스템을 설계하였으며, 시스템의 성능 예측에 관한 연구를 수행하였다. 추력 측정 시스템은 빔, 박막, 압저항 센서로 구성된다. 시스템의 안정성 검증과 빔의 응력 변화를 확인하고 압저항 센서의 크기 및 위치 선정을 위해 FEM 해석을 수행하였다. 재료의 허용응력과 최대응력을 비교하여 설계한 시스템들의 안정성을 검증할 수 있었다. 압저항 센서는 높은 게이지 계수를 확보하기 위해 빔의 길이의 20%로 설계 하였으며, 기준형상의 박막과 빔의 크기는 각각 $15mm{\times}15mm$, $500{\mu}m{\times}500{\mu}m$로 설계하였다.

• 대한토목학회논문집
• /
• 제29권3C호
• /
• pp.105-113
• /
• 2009

프레셔미터 시험은 하중에 따른 변위 곡선에 기초하여 지반의 변형특성을 평가할 수 있는 시험 방법으로 현장의 응력 상태 및 토체의 입자 구조를 그대로 반영하여 지반의 비선형적인 변형특성을 평가할 수 있는 장점을 지니고 있다. 본 연구에서는 교란의 영향을 최소화 할 수 있는 하중 재재하 곡선을 이용하여 전단탄성계수의 감쇠 특성을 평가할 수 있는 시험및 해석 방법을 제안하고 있다. 하중 제하-재재하 과정에서 발생될 수 있는 원지반과의 응력 차이를 고려하여 최대 전단탄성계수를 산정하고, 재재하 곡선의 감쇠 특성과 결합하여 변형률 크기에 따라 감쇠되는 전단탄성계수의 특성을 평가하고 있다. 이를 위하여, 대형 압력 토조를 이용하여 다양한 지반 조건에서 프레셔미터 시험을 수행하였으며, 벤더 엘리먼트 시험및 공진주 시험을 통하여 전단탄성계수 감쇠 특성을 평가, 비교하였다.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.593-600
• /
• 2010

In this paper, High brightness LED (light-emitting diodes) driver IC (integrated circuit) using new current sensing circuit is proposed. This LED driver IC can provide a constant current with high current precision over a wide input voltage range. The proposed current-sensing circuit is composed of a cascode current sensor and a current comparator with only one reference voltage. This IC minimizes the voltage stress of the MOSFET (metal oxide semiconductor field effect transistor) from the maximum input voltage and has low power consumption and chip area by using simple-structured comparator and minimum bias current. To confirm the functioning and characteristics of our proposed LED driver IC, we designed a buck converter. The LED current ripple of the designed IC is in ${\pm}5%$ and a tolerance of the average LED current is lower than 2.43%. This shows much improved feature than the previous method. Also, protections for input voltage and operating temperature are designed to improve the reliability of the designed IC. Designed LED driver IC uses 1.0 ${\mu}m$ X-Fab. BiCMOS process parameters and electrical characteristics and functioning are verified by spectre (Cadence) simulation.