• 제목/요약/키워드: Reference Source

검색결과 964건 처리시간 0.028초

3차원 음향홀로그래픽을 이용한 음원위치 추정에 관한 연구 (A Study Absolute Position Estimation of Sound Source)

  • 김천덕;심동연;장비;이채봉;차경환
    • 한국음향학회지
    • /
    • 제16권5호
    • /
    • pp.76-82
    • /
    • 1997
  • 본 논문은 음원의 절대위치를 정확하게 추정할 수 있는 음향홀로그래픽법에 관하여 계산기상의 시뮬레이션 및 측정시스템을 이용한 실험과결과에 대하여 서술한다. 이 연구에서는 원거리 음장을 만족하도록 측정면을 설정하여 7개의 마이크로폰을 직선으로 배열한다. 음원의 측정은 음원면에 근접한 위치에 한 개의 기준 마이크로폰을 설치하고 측정면의 마이크로폰들을 등간격으로 스캐닝하면서 각지점의 음을 동시 기록한다. 수음한 기준음과 측정음간의 크로스 스펙트럼 알고리즘에 의하여 음원의 절대위치를 측정한다. 그리고 각 마이크로폰의 위상차는 기준 마이크로폰을 대상으로 위상보상 하였으며, 측정시의 시간지연은 제 1열 측정시점을 기준으로 시간보상을 행하였다. 측정면에 설정한 마이크로폰들의 최적 간격은 수치 시뮬레이션에 의하여 정한다. 음원신호는 정현파를 이용하고 S/N비를 30dB의 조건하에서 각각 실험을 행하였다. 시뮬레이션과 실험에서 결정한 최적 마이크로폰 간격은 2KHz인 정현파 음원을 기준으로 하여 공간상의 나이키스트 조건을 만족하도록 설정하였다. 무향실에서 측정한 실험결고, 500Hz 와 1KHz의 신호원에 대한 음원이 2KHz인 경우의 추정된 3차원 홀로그램의 주극폭이 각각 87%와 30%씩 감소하였고, 그 결과 수치 시뮬레이션의 타당성을 확인할 수 있었다. 그러므로 본 연구에서 제안하는 3차원 음향 홀로그래픽법을 이용한 음원위치 추정에 관한 연구의 유용성을 검증하였다.

  • PDF

A New Control Method for a Single-Phase Hybrid Active Power Filter based on a Rotating Reference Frame

  • Kim, Jin-Sun;Kim, Young-Seok
    • Journal of Power Electronics
    • /
    • 제9권5호
    • /
    • pp.718-725
    • /
    • 2009
  • To get instantaneous reference data in a single power system with vector space phasors, the instantaneous load current is adopted as a phase and another new signal, which is delayed through filtering by the phase-delay property of a low-pass filter, is used as the secondary phase. Because the two-phases have a different phase, the instantaneous value of the harmonic current can be obtained without a time-delay in calculation. The reference voltage is created by multiplying the coefficient k by the compensation current using the rotating reference frame synchronized with the source-frequency. To verify the validity of the proposed control method, experiments are carried out on a prototype of the single-phase hybrid active power filter system.

회전좌표계를 이용한 단상 하이브리드형 능동 전력필터 (Single-Phase Hybrid Active Power Filter Using Rotating Reference Frame)

  • 김진선;김영석
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제54권8호
    • /
    • pp.377-386
    • /
    • 2005
  • This paper presents the control algorithm of single-phase hybrid active power filter for the compensation of harmonic current components in nonlinear R-L load with passive active Power filters. To construct two phase system, an imaginary second phase was made. In this proposed method, the new signal which is the delayed through the filtering by the phase-delay property of low-pass filter is used as the secondary phase. Because two-phases have the different phase, the instantaneous calculation of harmonic current is possible. In this paper, a reference voltage is created by multiplying the coefficient k by the compensation current using the rotating reference frame synchronized with the source-frequency, not applying to instantaneous reactive power theory which has been used with the existing fixed reference frames In order to verify the validities of the proposed control methods, experiments are carried out with the prototypes of single-phase hybrid active power filter.

전원 불평형과 역률을 보상하는 직렬형 능동전력필터의 통합적 제어 (Integrative Control of Series Active Power Filters for Source Voltage Unbalance Compensation and Power Factor Correction)

  • 장정익;석줄기;이동춘
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제55권5호
    • /
    • pp.258-264
    • /
    • 2006
  • This paper presents an integrative control scheme for series-type active power filters combined with shunt passive filters not only to compensate for the source voltage unbalance and current harmonics but also to correct the power factor. To reduce the power capacity of the active filters, passive filters are connected in parallel. Diode rectifiers are replaced by the PWM converters in order to feed the real power back to the source. Power factor control is performed by changing the phase of the load voltage so that the phase of the source current coincides with that of the source voltage. The resultant voltage reference is the addition of the voltage component compensating for the source voltage unbalance and harmonic currents and the voltage component correcting the power factor. The validity of the proposed algorithm has been verified by experimental results.

전원동기를 위한 위상검출방법 (A Phase Detection Method For Line Lock)

  • 김영춘;이사영
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2007년도 하계학술대회 논문집
    • /
    • pp.428-430
    • /
    • 2007
  • Converter that is dc source equipment source's phase by reference control function that detect source's phase because should be done compulsorily use. Source's phase detect method there be method that use source's ac voltage directly by signal, and use methods that voltage detects status by PLL method and so on via point that '0' becomes usually. All above methods to detect phase are using, wrong action of phase detector converter's ailment or converter of burn can. Ths paper compares and examined usable phase detection method in source's frequency fluctuation presuming source's frequency using observer.

  • PDF

건축물 설계현황 분석을 통한 국내 비주거용 표준건물의 설정에 관한 연구 (A Study on the Reference Building based on the Building Design Trends for Non-residential Buildings)

  • 정영선;정해권;장희경;유기형
    • 한국태양에너지학회 논문집
    • /
    • 제34권3호
    • /
    • pp.1-11
    • /
    • 2014
  • The Korean government plans to introduce the building energy performance standard which regulates the annual energy consumption of buildings. This paper aimed to set up the reference building from database based on the building design trends for non-residential buildings. We surveyed the design data of 435 non-residential buildings which were granted building permission from 2007 to 2011. And we conducted estimation on the heating & cooling load and the energy consumption of the reference building using ECO2 program. From results, the reference building of non-residential buildings was office building which had a total 7 floors and $20,838m^2$ gross floor area. And it suggests the design reference data of building envelope, HAVC, heat source equipment and lighting system for the reference building. The total annual energy use of the reference building was $151.9kWh/m^2yr$.

Ralstron 선원대체형 Ir-192 원추선원의 선량 전산화 모델링 (Dose Computation Modeling for Frustum Typed Ir-192 of Ralstron Source)

  • 최태진
    • 한국의학물리학회지:의학물리
    • /
    • 제12권1호
    • /
    • pp.19-29
    • /
    • 2001
  • 방사선의 에너지가 비교적 낮은 선원은 알짜선원의 방사능크기와 캡슐을 통과한 선량으로 나타내는 겉보기방사능크기로 구분할 필요가 있다. 저자는 국내 도입된 Ralstron 강내조사장치에 사용할 고선량률 Ir-192 선원을 고안제작하여 선원-캡슐간 필터효과를 조사하였다. 선원은 직경 1.5mm 와 높이 1.5mm 이고, 선원캡슐의 외경과 길이는 각각 3.0 mm 와 12.0mm로 원형과 동일한 외형을 하고 있다. 선원의 필터에 의한 선량감쇠는 66.3%로 나타났으며, 단위 방사능 강도에 의한 기준 출력선량은 선원 측방 1cm 거리에 도달되는 조직선량을 기준선량으로 규격화하였으며, 기준선량은 0.0013511cGy/mCi -sec (cGy/37MBq-sec) 로 나타났다. 선원하부는 스텐필터 두께의 영향으로 동일 거리의 측방 위치의 조직선량에 비해 약 52%의 선량감쇠를 보이고 있다. 그러나 선원하부 에서 측방 영역으로 갈수록 스텐 필터에 의한 선량감쇠효과가 줄어드는 것을 확인할 수 있었다. 선원중심에서 상하 45도 대각선 방향의 선량을 비교한 바 상부 대각선 방향의 선량이 하부의 것에 비해 약 4% 크게 나타났으며, 이는 선원 상부의 캡슐용기의 모양을 경사지게 한 결과 필터효과가 상대적으로 적음을 알 수 있다. 선원과 케이블이 있는 선원축의 연결케이블과 근접한 20도이내의 영역에서는 필터효과의 변화가 커서 40%의 선량감쇠를 보였으나, 축에서 떨어질수록 균등한 동심원의 선량분포를 얻었다.

  • PDF

공기열원 및 수열원을 이용한 열펌프 시스템의 성능특성에 관한 연구 (A study on the comparison of the performance of a heat pump system with air and water heat sources)

  • 고원빈;박윤철
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권7호
    • /
    • pp.563-568
    • /
    • 2016
  • 본 연구는 연료전지 자동차용 공기조화기의 난방성능평가를 위하여 기존의 전반적인 히트펌프 시스템 중 공기열원 히트펌프 시스템의 증발기를 판형열교환기로 교체하여 시스템에 흐르는 냉매와 연료전지 스택 폐열을 직접 열교환이 가능한 수열원 이용이 가능한 난방시스템의 성능실험을 수행하였다. 실험결과에서 압축기의 회전수가 높을수록 소비동력이 증가하였다. 공기열원 이용방식의 경우 압축기 회전수가 1,200rpm이고 EEV개도가 25%인 경우 $COP_h$가 2.03으로 가장 높게 나타났고, 같은 압축기의 회전수에서 수열원 시스템은 EEV개도가 75% 및 스택 폐열의 온도가 $50^{\circ}C$인 경우 $COP_h$가 9.42로 가장 높게 나타났다.

Efficiency calibration of a coaxial HPGe detector-Marinelli beaker geometry using an 152Eu source prepared in epoxy matrix and its validation by efficiency transfer method

  • Yucel, Haluk;Zumrut, Senem;Nartturk, Recep Bora;Gedik, Gizem
    • Nuclear Engineering and Technology
    • /
    • 제51권2호
    • /
    • pp.526-532
    • /
    • 2019
  • In this study, an in-house $^{152}Eu$ calibration source was produced from a custom epoxy matrix with a density of ${\rho}=1.14g\;cm^{-3}$, which is chemically stable and durable form after its solidification. The homogeneity of $^{152}Eu$ in matrix was obtained better than 98%. For a Marinelli beaker geometry, an efficiency calibration procedure was applied to a n-type, coaxial, 78.5% relative efficient HPGe detector in the energy range of 121.7-1408.0 keV by using in-house $^{152}Eu$ calibration source. Then the measured efficiencies for Marinelli geometry were compared with the results calculated by MEFFTRAN and ANGLE softwares for the validation. Although MEFFTRAN and ANGLE have two different efficiency transfer algorithms to calculate the efficiencies, they usually need to use a reliable and accurate reference efficiency values as input data. Hence, reference efficiency values were obtained experimentally from a multinuclide standard source for the same detector-Marinelli geometry. In the present source characterization, the corrections required for self-absorption and true coincidence summing effects for $^{152}Eu$ gamma-rays were also obtained for a such close counting geometry condition. The experimental results confirmed the validity of efficiency calculations obtained by MEFFTRAN and ANGLE softwares that are calculation tools.

Moving Average를 이용한 전압강하보상 알고리즘에 관한 연구 (A Study of Voltage Drop Compensation Algorithm using Moving Average)

  • 김성환;김진선;김영조;김영석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 B
    • /
    • pp.1202-1204
    • /
    • 2004
  • This paper propose the control algorithm for improving the power quality through the voltage compensation when source voltage is dropped. The algorithm signified occurrence of voltage drop in source voltage of each phase storing source voltage for two cycles using the concept of moving average and using the source voltage of last half cycle. If there are voltage drops in the source voltages, series active power filter compensates the differences between reference waveform and source voltage waveform. Therefore, voltage drop is compensated. It proposed series active power filter of three phases three lines to apply to the proposed algorithm and the presented experiment results verified logicality and effectiveness of the proposed algorithm.

  • PDF