• Journal of Korea Technology Innovation Society
• /
• v.17 no.2
• /
• pp.380-420
• /
• 2014

We increasingly see the importance of employees acquiring enough expert capability or innovation capability to prepare for ever growing uncertainties in their operation domains. However, despite the above circumstances, there have not been an enough number of researches on how operational input components for employees' innovation outcome, innovation activities such as acquisition, exercise and promotion effort of employee's innovation capability, and their resulting innovation outcome interact with each other. This trend is believed to have been resulted because most of the current researches on innovation focus on the units of country, industry and corporate entity levels but not on an individual corporation's innovation input components, innovation outcome and innovation activities themselves. Therefore, this study intends to avoid the currently prevalent study frames and views on innovation and focus more on the strategic policies required for the enhancement of an organization's innovation capabilities by quantitatively analyzing employees' innovation outcomes and their most suggested relevant innovation activities. The research model that this study deploys offers both linear and structural model on the trio of learning, innovation capability and innovation outcome, and then suggests the 4 relevant hypotheses which are quantitatively tested and analyzed as follows: Hypothesis 1] The different levels of innovation capability produce different innovation outcomes (accepted, p-value = 0.000<0.05). Hypothesis 2] The different amounts of learning time produce different innovation capabilities (rejected, p-value = 0.199, 0.220>0.05). Hypothesis 3] The different amounts of learning time produce different innovation outcomes. (accepted, p-value = 0.000<0.05). Hypothesis 4] the innovation capability acts as a significant parameter in the relationship of the amount of learning time and innovation outcome (structural modeling test). This structural model after the t-tests on Hypotheses 1 through 4 proves that irregular on-the-job training and e-learning directly affects the learning time factor while job experience level, employment period and capability level measurement also directly impacts on the innovation capability factor. Also this hypothesis gets further supported by the fact that the patent time absolutely and directly affects the innovation capability factor rather than the learning time factor. Through the 4 hypotheses, this study proposes as measures to maximize an organization's innovation outcome. firstly, frequent irregular on-the-job training that is based on an e-learning system, secondly, efficient innovation management of employment period, job skill levels, etc through active sponsorship and energization community of practice (CoP) as a form of irregular learning, and thirdly a model of Yί=f(e, i, s, t, w)+${\varepsilon}$ as an innovation outcome function that is soundly based on a smart system of capability level measurement. The innovation outcome function is what this study considers the most appropriate and important reference model.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.13 no.2
• /
• pp.112-139
• /
• 2000

I examined and referred to literatures of every generations on the nicknames, causes, herb medications and acupucture treatments of ptosis(上胞下垂). And then the results were obtained as follows. We've compared and analyzed Occidental and Oriental medical causes, symptoms and treatments of Primary trigeminal neuralgia and wanted to get better effects by a cooperative analysis. So the examination and analysis of the recent treatment tendency and reference bibliography show the following results. 1. Trigeminal neuralgia is nerve systematic disease appearing in the distribution scope of trigeminal nerve. It's characterized by extreme pain accompanying with a repeated and simultaneous fit from several seconds to 1-2 minutes. 2. Though there are many hypothesis on the trigeminal neuralgia, but now many doctors agree that when trigeminal nerve is under the local out of sheath conditions resulting from receiving a chronic stimulus, and the nucleus of trigeminal nerve fire, owing to decrease of pain control function and abnormal occurrence of action potential, it would be appeared. 3. The Oriental medical name of trigeminal neuralgia is generally Dootong, Doopoong, Myuntong, Pyundootong, Pyundoopoong, and Myuntong is the nearest in Occidental medicine. 4. The Oriental medical cause of trigeminal neuralgia is usually divided into Wekam and Naesang. The first one is caused by Poonghan, Poongyul, Damhwa and wicked energy enter into the body, the mechanical energy is obstructed and can't move any more, so the pain appears by them. The other cause is the hurt by emotion. And it would be loss of the transportain of liver and obstructed, so result into Kanwulhwahwa, Kanpoongnaedong and the pain appears. 5. There are two methods of curing trigeminal neuralgia. As a medication, primary method is prescribing Carbamazepine and the second is using Phenytoin or Baclofen. And as a operation, Drug injection of trigeminal nerve, Amputation of branches of trigeminal nerve, Retrogasserian glycerol rhizotomy, Radiofrequency gangliolysis, Neurovascular decompression can be used. 6. There are several herb medicines for Trigeminal neuralgia. First, Chungung is good for Hwaejeetong, Keopoongjedam, Hwalhyuljeetong. Second, Jeongal, Jiryong, Okong is used for Sikpoonghekyung, Tongkyungjeetong. Third, Baekjee, Sesin, Cheonma, Manhyungja is efficacious in Sinonhepyo. Sanpoongjeetong. Fourth, for falling of liver's Wulhwa, Yongdamcho, Hyungge, Kukwha can be used. And also Saengjihwang, Hwangkm is good for going down the fever of Yangmyungwiyul and finally, Baekkangjam. Moryu can be effective for Jaumjamyang, Haekyungjitong. The other medicines can be used as assistant analgesics, and it also efficacious. 7. Generally the points of pain on the face and the points of Soyangkyung and Yangmyungkyung is used for Acupuntual therapy, because the two meridians passed on the face. Hakwan. Sabaek, Kwanryo, Keoryo, Hyubkeo, Taeyang, Jeechang, Younghyang, Eoyo, Chanjuk. Yangbaek. Sajukkong. Dooyoo, Kwangsangjum, Sengjang, Poongjee is used for taking near point and Joksamlee, Naejung, Habkok is used for taking distant point. 8. Dansam or Danggui injection which have a effect for Hwalhyulhwaeo, Sokyunghwalak and Vit B1, Vit B2, Vit B12, $2\%$ Hydrochloroprocaine, $1\%$ Lidocaine injection to pain point for local analgesics had so good effect. And external application and moxibustion are used for another treatment. 9. It proved that through mouse model, both Herb medication group and Drug medication group are efficacious for trigeminal neuralgia similarly and also the cooperative medication group shows more effective result than the only drug medication group.

• Journal of Korean Academy of Nursing Administration
• /
• v.5 no.3
• /
• pp.547-561
• /
• 1999

The purpose of this study was to determine which nursing activities are performed for patients in each of the nine KDRGs and to examine common nursing activities between patients with the nine KDRGs and special nursing activities which were not common to patients with the nine KDRGs. The study will provide basic data for estimation of nursing fees. The nine KDRGs in model project are Lens procedures, tonsillectomy, &/or adenoidectomy, appendectomy &/or not complicate principal diagnosis, vaginal delivery, cesarean section, anal & stomal procedures, inguinal & femoral hernia, uterine & adneza procedure for nonmalignancy, and simple pneumonia & pleurisy. To determine the nursing activities for each of the nine KDRG, checklists of nursing activities in each nine KDRG were developed from the literature and a total of 115 records of patients 'who were diagnosed and discharged between January and April, 1999 from a tertiary medical center. Nursing activities for each of the nine KDRG were verified through two consecutive content analyses. The results of study are followed as: 1. The checklists of nursing activities developed included direct and indirect nursing activities, for a total of 241 nursing activities. Direct nursing consisted of physical, educational, emotional-socioecomomic-spiritual nursing in 17 areas. Indirect nursing had four areas. 2. Through the two consecutive content analyses, 197 nursing activities were selected, having item CVIs of .83 or more. Those included 81 nursing activities for Lens procedures, 95 for Tonsillectomy &/or Adenoidectomy. 93 in Appendectomy &/or not complicated principal diagnosis, 155 for vaginal delivery, 172 for cesarean section, 89 for anal & stomal procedures, 93 for inguinal & femoral hernia, 108 for uterine & adneza procedures for non-malignancy, and 68 for simple pneumonia & pleurisy. 3. Nursing activities for each of the nine KDRG were compared. Activities with 80% or higher commonality within the nine KDRGs consisted of 86 of 197 nursing activities for the total designated common nursing activities, 30 common nursing activities for patients in the operation group, 45 common activities for patients in the delivery Group. Special nursing activities not common within the nine KDRGs were : 3 for Lens procedures, 1 for Tonsillectomy &/or Adenoidectomy. 2 for Appendectomy &/or not complicated principal diagnosis, 27 for vaginal delivery, 21 for Cesarean section, 6 for anal & stomal procedures, 3 for inguinal & femoral hernia, 16 for uterine & adneza procedure for non-malignancy, 8 for simple pneumonia & pleurisy. In this study, nursing activities for each of the nine KDRGs verified through two consecutive content analyses are those that are performed in the hospital. And, nursing activities for each of the nine KDRGs included all nursing activities from hospital admission to discharge. So. the checklists consisted of nursing activities that allow for an estimation of nursing fees under PPS. The classification of nursing activities in the study will provide a reference for the development of a nursing activity classification.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.321-329
• /
• 2001

To establish systematic diagnosis and treatment planning of dentofacial deformity patient including facial asymmetry or hemifacial microsomia patient, comprehensive analysis of three dimensional structure of the craniofacial skeleton is needed. Even though three dimensional CT has been developed, landmark identification of the CT is still questionable. In recent, a method for correcting cephalic malpositioning that enables accurate superimposition of the landmarks in different stages without using any additional equipment was developed. It became possible to compare the three-dimensional positional change of the maxillomandible without invasive procedure. Based on the principle of the method, a new program was developed for the purpose of diagnosis and treatment planning of dentofacial deformity patient via three dimensional visualization and structural analysis. This program enables us to perform following menu. First, visualization of three dimensional structure of the craniofacial skeleton with wire frame model which was made from the landmarks observed on both lateral and frontal cephalogram. Second, establishment of midsagittal plane of the face three dimensionally, with the concept of "the plane of the best-fit". Third, examination of the degree of deviation and direction of deformity of structure to the reference plane for the purpose of establishing surgical planning. Fourth, simulation of expected postoperative result by various image operation such as mirroring, overlapping.

• The Journal of Society for e-Business Studies
• /
• v.15 no.3
• /
• pp.25-44
• /
• 2010

In recent years, Ubiquitous City (u-City), the integrated and convergence of ubiquitous services, infrastructure, technologies and city management of the new future development city, is being initiated by the Korean government and local authorities as their new national growth engine. However, a performance measurement system for evaluating and monitoring the impacts of U-City implementation is yet to be established. This paper aims to develop an integrated performance management system (PMS) and extensively used as a tool for managing performance activities to support the visions and goals of the u-City operations. Based on current reviews on the literature and interviews with experts drew Critical Success Factors (CSF) and Key Performance Indicators (KPI) by four different measurement domains including U-City services, infrastructure, technologies, management and developed into an integrated performance measurement system based on the Balanced Scored Card (BSC) perspective. The system also provides number of examples of 'u-City Strategy Map' which illustrates a causal relationship between CSFs to execute u-City visions and goals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.49-56
• /
• 2020

High temperature heat generated during rifle firing not only degrades the performance of the weapon, but also limits the user's operation. In this study, temperature change of handguard according to firing was measured with reference to Human Engineering criteria and the operability according to material was examined. Accordingly, for the firing test, three types of Korean rifle and one overseas model were selected for each material of handguard, and firing test was conducted using a contact type temperature meter. The test result shows that using a plastic handguard with low thermal conductivity and aluminum handguard with high thermal conductivity enabled the rifles to be operated with bare hands even when firing at more than 100 rounds at low atmospheric temperature. However, when firing more than 60 rounds at over 20℃ atmospheric temperature, aluminum handguard use is limited. When firing quickly over 100 rounds, handguard use is restricted regardless of its fabrication material. To eliminate operational limitations by overheating, it is necessary to eliminate direct contact with skin using gloves, vertical grips, etc. This study examined the operability of rifles in terms of thermal risk, and the resulting study results are expected to be used as basic data for Human Engineering of other rifles and munitions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.207-212
• /
• 2007

This paper aims to measure and evaluate the technical efficiency with two inputs and four outputs with the use of fuzzy DEA in Korean RCC/RSC. Especially, this paper included not only the marine accident data which occurred for the analysis in particular but also the possibility data of a potential marine accident by an Environmental Stress value and analyzed the technical efficiency. And in this paper, asymmetrical triangular fuzzy number is presented about inputs/ outputs data and a procedure is suggested for it's solution. The basic idea is to transform the fuzzy CCR model into a crisp linear programming problem by applying an alternative ${\alpha}$-cut approach. Also this paper propose a ranking method for fuzzy RCC/RSC using presented fuzzy DEA approach. The result, when ${\alpha}$-cut is 0.5, efficiency priority is found in the order of YS, BS, MP, TY, JJ, PH, US, IC, SC, DH, GS, TA, WD RCC/RSC. Finally, Inefficiency TA, WD RCC/RSC have to benchmarking with reference sets.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.297-304
• /
• 2015

Recently, the demand for a PRT(Personal Rapid Transit) system based on autonomous navigation is increasing. Accordingly, the applicability investigations of the PRT system on rail tracks or roadways have been widely studied. In the case of unmanned vehicle operations without physical guideways on roadways, to monitor the position of the vehicle in real time is very important for stable, robust and reliable guidance of an autonomous vehicle. The Global Positioning System (GPS) has been commercially used for vehicle positioning. However, it cannot be applied in environments as tunnels or interiors of buildings. The PRT navigation system based on magnetic markers reference sensing that can overcome these environmental restrictions and the vehicle dynamics model for its H/W configuration are presented in this study. In addition, the design of a control S/W dedicated for unmanned operation of a PRT vehicle and its prototype implementation for experimental validation on a pilot network were successfully achieved.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.782-792
• /
• 1999

효과적인 ATM 망의 관리는 연결 지향 환경, 다양한 서비스 등급, 대규모 트래픽, 가상 망 구성 그리고 여러가지 트래픽 유형 등과 같은 다양한 ATM 특성을 다룰 수 있어야만 한다. 이를 위해 ATM 포럼에서는 ATM 장치, 사설망, 공중망 및 그들간의 상호작용을 지원하기 위한 ATM 망 관리 참조 모델을 정의하였으며, 그 중 하나가 서로 다른 판매자로부터의 ATM 장비들간의 상호동작성을 보장하기 위해 SNMP 기반 망 관리 프로토콜을 통해 상호 연결된 인터페이스를 관리할 수 있도록 정의된 통합 지역 관리 인터페이스(ILMI) 프로토콜이다. ILMI의 목적은 두 인접한 ATM 장치로 하여금 그들 간에 공통의 ATM 링크에 대한 동작 파라메타를 자동적으로 구성할 수 있도록 함으로서, 관리자에 의해 수동 구성이 아닌 ATM 장치 상호간의 플러그 앤 플러그 기능을 지원하는데 있다. 본 논문에서는 이러한 ILMI 기술을 바탕으로 공중망 ATM 교환기에 연결된 가입자의 물리 인터페이스, ATM 계층 인터페이스, VPC 및 VCC의 구성 및 상태 정보를 효율적으로 관리하며, 가입자 시스템의 ATM 주소를 자동으로 등록, 관리할 수 있도록 하는 가입자 인터페이스 관리 시스템(SIMS)을 설계하고, 구현하였다. Abstract An effective ATM management must address the various features of ATM such as connection-oriented environment, varying class of service, large scale traffic, virtual network configurations and, and multiple traffic types. For this, ATM network management reference model defined by ATM Forum describes the various types of network management needed to support ATM devices, private networks, public networks, and the interaction between them. One of these types is Integrated Local Management Interface (ILMI) defined to manage interconnected interface through SNMP-based network management protocol for ensuring the interoperability of ATM devices from different vendors. The purpose of ILMI is to enable two adjacent ATM devices to automatically configure the operation parameters of the common ATM link between them and then to provide a Plug and Plug function to any ATM devices with not a passive configuration by manager but a automatic configuration. This paper design and implement a Subscriber Interface Management System (SIMS) which provide automatic registration and management of ATM address of subscriber system and efficiently manages physical interface of subscriber who is connected to public ATM switch, ATM layer interface, configuration information and status information of VPC and VCC.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1383-1398
• /
• 2018

Sea surface wind is one of the most fundamental variables for understanding diverse marine phenomena. Although scatterometers have produced global wind field data since the early 1990's, the data has been used limitedly in oceanic applications due to it slow spatial resolution, especially at coastal regions. Synthetic Aperture Radar (SAR) is capable to produce high resolution wind field data. KOMPSAT-5 is the first Korean satellite equipped with X-band SAR instrument and is able to retrieve the sea surface wind. This study presents the validation results of sea surface wind derived from the KOMPSAT-5 backscattering coefficient data for the first time. We collected 18 KOMPSAT-5 ES mode data to produce a matchup database collocated with buoy stations. In order to calculate the accurate wind speed, we preprocessed the SAR data, including land masking, speckle noise reduction, and ship detection, and converted the in-situ wind to 10-m neutral wind as reference wind data using Liu-Katsaros-Businger (LKB) model. The sea surface winds based on XMOD2 show root-mean-square errors of about $2.41-2.74m\;s^{-1}$ depending on backscattering coefficient conversion equations. In-depth analyses on the wind speed errors derived from KOMPSAT-5 backscattering coefficient data reveal the existence of diverse potential error factors such as image quality related to range ambiguity, discrete and discontinuous distribution of incidence angle, change in marine atmospheric environment, impacts on atmospheric gravity waves, ocean wave spectrum, and internal wave.